Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.     

赤铁矿的硫化改性及硫化产物对水中六价铬的还原固定化

以赤铁矿为原料、硫化钠为硫化试剂,对赤铁矿进行了硫化改性,考察了硫化赤铁矿(SH) 对水中六价铬Cr(Ⅵ) 的还原固定化性能。 Langmuir等温吸附模型拟合结果表明,该材料在pH=7时对Cr(Ⅵ)的最大吸附量为66.7 mg·g⁻¹,约为原始赤铁矿的39倍。SH对 Cr(Ⅵ) 的去除过程符合准二级动力学模型,表明该过程可能受化学吸附控制。进一步采用TEM、XRD等手段对SH进行了表征,并结合材料吸附前后的XPS图谱变化,对SH去除水中 Cr(Ⅵ) 的机制进行了分析。结果表明, 与未改性的赤铁矿相比,硫化改性赤铁矿对Cr(Ⅵ)去除性能显著提高的原因可能源于赤铁矿表面形成的铁-硫化合物层。在SH还原固定化 Cr(Ⅵ) 的过程中,表面硫化层中的还原性物质FeS、吸附态 Fe(Ⅱ) 和 S(-II) 将 Cr(Ⅵ) 还原为 Cr(Ⅲ),从而实现对Cr(Ⅵ) 的稳定化。     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.     

四种净水工艺对水源水微量有机物去除的研究

以UV254和CODMn代表饮用水源水中有机物替代指标.对常规处理、生物陶粒预处理、生物滤池、生物活性炭(BAC)、颗粒活性炭(GAC)、纳滤和光催化氧化进行组合,形成不同的处理流程,研究各流程对UV254和CODMn的去除效果.结果表明,各工艺流程都有一定的处理效率,其中以生物滤池和纳滤为主的组合流程处理效果最佳.此流程对UV254的去除率接近100%,CODMn的去除率达到78.6%,大大提高了饮用水的安全性.     

生物材料治理镉污染研究进展

近年来,生物材料以其经济、有效和无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多的优势·可替代传统的镉污染处理方法.综述了目前国内外生物材料在处理镉污染方面的研究进展,并对今后应用生物材料治理镉污染提出了一些建议.     

天然气引射调峰系统的噪声形成及其治理研究

采用天然气引射调峰技术,能使上海某储配站10台天然气高压球罐的储气调峰能率提高68%,大大有助于解决天然气用气高峰时的供需平衡问题,并能节约初投资人民币1亿元.但使用超音速引射器后,当球罐压力下降到某一值时会产生高频噪声,影响管束区操作环境.本文分析了噪声产生的原因,提出了合理的噪声治理方案,并进行了方案的实施.实践证明:噪声治理效果良好,降低了管束区噪声污染,达到了国家"工业企业噪声卫生标准".     

Ionic liquid-containing semipermeable membrane devices for monitoring the polycyclic aromatic hydrocarbons in water

Ionic liquid-containing semipermeable membrane devices (IL-SPMDs) were developed to monitor the polycyclic aromatic hydrocarbons in water. Uptake kinetics of naphthalene, 1-methylnaphthalene, phenanthrene, pyrene, chrysene by layflat low-density polyethylene tubing (15 cm x 2 cm) filled with 0.5 ml 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid were studied in a laboratory continuous-flow system for the duration of 16 days. The device concentration factors were in the range of 830-7800 for the studied PAHs. The kinetic parameters of IL/water partition coefficients, analytes uptake rate constants and sampling rates were estimated using mathematical models. These parameters were used in the field experiment to estimate the concentrations of the PAHs in Lanzhou section of Yellow River in China, with the result in comparison with that obtained by triolein-SPMD.     

Quantification of joint effect for hydrogen bond and development of QSARs for predicting mixture toxicity

A QSAR model is successfully proposed to predict the toxicity effect on Photobacterium phosphoreum by nonpolar-narcotic-chemical mixtures and/or polar-narcotic-chemical mixtures. For nonpolar-narcotic-chemical mixtures and polar-narcotic-chemical mixtures, their corresponding hydrophobicity-based QSAR models are derived from regression analysis. Comparison of these two QSAR models make us believe that it is the joint effect of hydrogen bond in polar-narcotic-chemical mixture that leads to the difference between these two models. Such joint effect of hydrogen bond can be quantified as AMH and BMH by using the different partition coefficients of mixtures in various organic phase/water systems. And the regression analysis results convinced us that the introduction of AMH does improve the quality of the QSAR model with r2=0.948, S.E.=0.166 and F=745.201 at P=0.000 for total 84 mixtures.     

BPAC-UF对二级出水中抗生素抗性基因的去除及膜污染缓解机制

采用生物粉末活性炭(BPAC)-超滤(UF)组合工艺去除控制二级出水中抗生素抗性基因(ARGs),并对ARGs的去除和BPAC缓解膜污染机制进行了探讨。结果表明：与直接超滤工艺相比,组合工艺对水中四环素类抗性基因(tetA、tetW)、磺胺类抗性基因(sul Ⅰ、sul Ⅱ)以及溶解性有机碳(DOC)的去除效果均有较大的改善,这主要是由于BPAC对ARGs的吸附降解作用所致;水中16S rDNA、int Ⅰ 1和DOC含量与不同种类ARGs浓度具有显著相关性,强化上述指标的去除可有效促进ARGs的削减;在BPAC投加量较低时,组合工艺的膜比通量较直接UF有所提高,膜污染状况明显改善;直接UF时,膜污染状况与滤饼层过滤模型的拟合度最好,而组合工艺的膜污染状况与标准膜孔堵塞模型和滤饼层过滤模型拟合度均较好。BPAC-UF组合工艺是一种较好的去除ARGs的工艺。     

臭氧催化氧化-BAF组合工艺深度处理抗生素制药废水

针对抗生素制药废水组分复杂、毒性强、难生物降解的特点,以Ce负载天然沸石作为催化剂(Ce/NZ),采用臭氧催化氧化-曝气生物滤池(BAF)组合工艺对抗生素制药废水二级生化处理出水进行深度处理。结果表明,Ce/NZ催化剂可显著改善臭氧预处理单元的处理效率,在臭氧进气浓度为50 mg·L⁻¹、臭氧进气量为600 mL·min⁻¹、催化剂用量为1 g·L⁻¹、臭氧反应时间为120 min的条件下,臭氧催化氧化预处理对抗生素制药废水的COD去除率达到43%,平均COD由220 mg·L⁻¹降至125 mg·L⁻¹,BOD₅/COD由0.12升至0.28,废水的可生化性得到显著提高。臭氧预处理单元出水采用BAF进行生化处理,在进水平均COD为125 mg·L⁻¹、平均NH₄⁺-N为12 mg·L⁻¹、水力停留时间为4 h、气水比为4∶1的条件下,COD和NH₄⁺-N的平均去除率分别为62%和64%。组合工艺处理后出水平均COD和NH₄⁺-N分别为46 mg·L⁻¹和4.1 mg·L⁻¹,出水水质可以稳定达到《发酵类制药工业水污染物排放标准》(GB 21903-2008)。相较于单独BAF工艺,组合工艺出水COD和NH₄⁺-N平均去除率分别提高了66%和15%,出水水质明显优于单独BAF工艺出水。