个体防护装备在应急救援处置中的作用

个体防护装备是保护人体不受外来有害因素伤害,保证人体安全与健康的重要装备.在工农业生产中,各国政府针对生产过程中可能出现的各种危害采取一系列工程技术措施保护劳动者的安全与健康,个体防护装备作为保护劳动者安全与健康的重要手段或最后一道防线,要求生产经营单位必须为劳动者配备.     

A quantitative water resource planning and management model for an industrial park level

This paper introduces an integrated water management model at the industrial park level. It suggests four approaches to water management: first, direct water reuse among users; second, water reuse among users by blending with freshwater; third, water reuse between users and a wastewater treatment plant; and fourth, groundwater recharge by reclaimed wastewater or other feasible applications in order to optimize the overall water efficiency. The model results in a comprehensive management methodology for optimizing water resources within an industrial park, seeking potential water reuse among industries, and incorporating the size and cost of reclaimed wastewater delivery systems. A case study is employed to test the model’s feasibility. An economic analysis of the optimized water use network is also carried out, showing the potential water and cost savings.     

Chemical contamination of the East River (Dongjiang) and its implication on sustainable development in the Pearl River Delta

A recent survey reveals that water quality and river sediments of Dongjiang (the East River) have been mildly contaminated by heavy metals and organic chemicals, such as copper, lead, PCBs, PAHs and HCHs. According to photogrammertic surveys, the sources of contamination are closely related to human activities, such as domestic and industrial discharges, agricultural chemical applications and soil erosion due to deforestation. The level of water and sediment contamination is most serious at the mid-river section near the urban of Weizhou. Due to natural dilution and diffusion, the levels of contamination are slightly decreased at the medium low section of the River near Qiaotou and Matan. Nevertheless, the levels of contamination increase again in the lower river section near Shenzhen, which is a highly developed economic zone. Since Dongjiang is the major source of potable water supply for Hong Kong (nearly 80% of potable water of Hong Kong is abstracted from Dongjiang) and the other parts of the Pearl River Delta (PRD), such organic and inorganic pollution merit concern. Ironically, most of the industrial and commercial activities in the watershed of Dongjiang are business investments of Hong Kong citizens. Cross-border environmental efforts should be enhanced with collaboration of different jurisdictions to achieve targets of regional sustainability.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.     

Physical resuspension and vertical mixing of sediments on a high energy continental margin (Sydney, Australia)

Four sediment cores from the continental margin adjacent to Sydney were analyzed for 210Pb, 137Cs, trace metals (Ag, Cd, Co, Cu, Mn, Ni, Pb, Zn), iron, dry bulk density, mud and moisture content. The concentrations of trace metals in the total sediment are low at all sites, although slightly elevated concentrations of Ag, Cu, Pb and Zn are present in the fine fraction of sediment (< 62.5 microns) near a major ocean outfall. Concentrations of trace metals in the fine fraction of sediment are similar in the upper 10-15 cm, indicating strong vertical mixing of the sediments, whereas an upward coarsening grain size in the upper 1-3 cm of sediment supports physical resuspension during storms. Sediment accumulation rates on the middle shelf adjacent to Sydney were estimated from downcore profiles of 210Pb and 137Cs and range between 0.2 and 0.4 cm yr-1. Although the mass fluxes of Cu, Pb and Zn within a distance of 2 km from the outfall (up to 36.1, 30.8 and 86.2 micrograms cm-2 yr-1, respectively) are greater than 20 km north of the outfall (< 23.5 micrograms cm-2 yr-1), the low concentrations of trace metals in sediments near the outfall support an efficient dispersal of anthropogenic contaminants on this continental margin.     

Decolorization of Remazol Black-B using a thermotolerant yeast, Kluyveromyces marxianus IMB3

The ability of Kluyveromyces marxianus IMB3 to decolorize Remazol Black-B dye was investigated. The effect of environmental conditions, such as pH and temperature were examined. No noticeable effects on decolorization were observed when pH varied from 3.0-5.5. Maximum colour removal, 98%, was achieved at 37 degrees C. Little or no colour removal was detected when K. marxianus IMB3 was incubated under anaerobic conditions. Further investigation, in which decolorization was monitored under extreme temperatures and low pH (to inhibit growth) and using ten fold dense inoculum, revealed that decolorization was due to biosorption to the yeast cells and not due to a metabolic reaction.     

The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.     

Carbon emission reduction and cost–benefit of methane digester systems on hog farms in China

Three different sizes of hog farms were selected to analyze the carbon emissions reduction and the cost–benefit of three methane digester systems. The sizes of the digesters are 2,200, 2,200 and 800 m³, respectively. The sales of slaughter hogs from them are 50,000, 35,000 and 10,000 head, respectively. The carbon emissions reductions were 5,237, 4,017, and 1,334 tons, respectively. The results show that while the methane digester systems have a significant effect on carbon emissions reduction, it is difficult to operate the systems sustainably. If the carbon emissions reduction can be traded at high enough prices in the carbon offset markets, then the systems will be profitable and sustainable. Newly established China's domestic carbon offset market could provide this possibility, but more government support is needed. In addition, this study shows that scale economies make the digester adoption relatively more profitable for larger farms than smaller ones.     

Augmenting Watershed Model Calibration with Incorporation of Ancillary Data Sources and Qualitative Soft Data Sources

Watershed simulation models such as the Soil & Water Assessment Tool (SWAT) can be calibrated using “hard data” such as temporal streamflow observations; however, users may find upon examination of model outputs, that the calibrated models may not reflect actual watershed behavior. Thus, it is often advantageous to use “soft data” (i.e., qualitative knowledge such as expected denitrification rates that observed time series do not typically exist) to ensure that the calibrated model is representative of the real world. The primary objective of this study is to evaluate the efficacy of coupling SWAT‐Check (a post‐evaluation framework for SWAT outputs) and IPEAT‐SD (Integrated Parameter Estimation and Uncertainty Analysis Tool‐Soft & hard Data evaluation) to constrain the bounds of soft data during SWAT auto‐calibration. IPEAT‐SD integrates 59 soft data variables to ensure SWAT does not violate physical processes known to occur in watersheds. IPEAT‐SD was evaluated for two case studies where soft data such as denitrification rate, nitrate attributed from subsurface flow to total discharge ratio, and total sediment loading were used to conduct model calibration. Results indicated that SWAT model outputs may not satisfy reasonable soft data responses without providing pre‐defined bounds. IPEAT‐SD provides an efficient and rigorous framework for users to conduct future studies while considering both soft data and traditional hard information measures in watershed modeling.