Soot-water distribution coefficients for polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans and polybrominated diphenylethers determined with the soot cosolvency-column method

For many types of hydrophobic compounds, sorption non-linearity and solid-water distributions in the field well above expectations from organic matter partitioning models have lead to the proposition that strong adsorption to soot surfaces may not be limited to polycyclic aromatic hydrocarbons but may extend as a significant process for many aromatic compound classes. Here, the soot-water distribution coefficients (Ksc) were determined with the soot cosolvency-column method for homolog series of five polychlorinated dibenzo-p-dioxins (PCDDs), five polychlorinated dibenzofurans (PCDFs) and for two polybrominated diphenylethers (PBDEs). All compounds exhibited significantly stronger association with soot carbon than expected from estimates of their bulk organic-carbon normalized partition coefficients (Koc). The Ksc/Koc ratios (at aqueous concentrations of around 0.1-1 microg/l) were for PCDDs (up to tetrachlorination) 19-130 (median 25), for PCDFs (also up to tetrachlorination) 150-490 (median 300), and for both the tetra- and pentabrominated PBDEs a factor of 60. The particularly strong soot sorption for the PCDFs is of similar enhancement factors as previously elucidated for polycyclic aromatic hydrocarbons. Compound-class specific correlations between log Ksc and octanol-water partition coefficients (log Kow) were significant for both PCDDs and PCDFs (and with R2 > 98%). These may prove useful for anticipating variable fractions of dissolved exposures between different environmental regimes and putative remediation objects.     

Halogenated compounds and climate change: future emission levels and reduction costs

OBJECTIVES: This work assesses the contribution to climate change resulting from emissions of the group of halogenated greenhouse gases. METHODS: A bottom-up emission model covering 22 technological sectors in four major regions is described. Emission estimates for 1996 and projection for 2010 and 2020 are presented. The costs for deep cuts into projected emission levels are calculated. RESULTS: The substances covered by this study have contributed emissions of 1100 +/- 800 MT CO2 equivalents per year in 1996. In terms of their relative contribution to emissions of CO2 equivalents, this corresponds to 3 +/- 2% of global emissions of all anthropogenic greenhouse gases. The wide range of uncertainty is due to the poorly quantified net global warming potential of the ozone depleting substances, which have an indirect cooling effect on climate through the destruction of stratospheric ozone. For annual emissions of HFCs, PFCs and SF6 (which are regulated under the Kyoto Protocol and for which global warming potentials are well defined), the relative contribution is projected to increase to 2% (600 MT CO2 eq.) of global greenhouse gas emissions by 2010. This trend is expected to continue, emissions are projected to grow to a contribution of roughly 3% (870 MT CO2 eq.) in 2020 compared to 0.9% (300 MT CO2 eq.) in 1996. For HFCs, PFCs and SF6, this study identifies global emission reduction potentials of 260 MT CO2 eq. per year in 2010 and 640 MT CO2 eq. per year in 2020 at below US$ 50 per ton. These values correspond to roughly 40% and 75% of projected emissions in 2010 and 2020, respectively.     

Mobility of heavy metals as related to soil chemical and mineralogical characteristics of Brazilian soils

In order to better understand the relationship between soil characteristics and mobility of some heavy metals, correlation studies were conducted in samples of unlimed and limed A, B and C horizons of three Brazilian soils, representative of the majority of the tropical soils. A number of chemical and mineralogical characteristics of one Oxisol and two Ultisols were related to the retardation factors (Rf) for zinc (Zn), cadmium (Cd), copper (Cu) and lead (Pb). The retardation factors, obtained in leaching column experiments, were used as an estimate of solute movement in the profile. Soil types and soil horizons were found to influence metal retardation factors which, in turn, correlated better with the chemical than the mineralogical soil characteristics. For the unlimed soil samples, the soil characteristics that significantly correlated with Zn-Rf and Cd-Rf were the sum of exchangeable bases (SB), and soil exchangeable (Ca-KCl) and non-exchangeable (Ca-HCl) calcium contents. These results showed the strong influence of the cation exchange phenomenon on the retention and mobility of these two metals. For Cu and Pb, not only SB, cation exchange capacity (CEC) and Ca-KCl and Ca-HCl but also the organic matter correlated well with the Rf, showing that complex or chelate formation may play an important role in the movement of these elements. The important soil chemical characteristics related to the retardation factors in the limed soil samples were SB for Cd, and Ca-HCl for Cu and Pb, suggesting that precipitation may also influence the mobility and retention of the latter two heavy metals in these soil samples. Soil pH influenced the heavy metals adsorption and movement as shown by the significant correlation with the retardation factors when the combined data for the unlimed and limed soil samples was considered.     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Removal of hydrocarbons from wastewater using treated bark

This paper explores the possibility of removing hydrocarbons (HCs) and trace elements from synthetic and industrial effluents using treated bark as biosorbent. Coniferous bark was treated either chemically (Tc) or biologically (Tb) to eliminate soluble organic compounds of bark. The removal efficiency (RE) of the HCs from a synthetic oil-water mixture containing spent diesel motor oil exceeds 95% using 2 g/L of treated bark mixed with a synthetic oil-water mixture containing 2 g/L of spent oil. Under these conditions, the retention capacity (RC) was approximately 1 g HC/g dry substrate. The sorption reaction seems to be quasi-instantaneous, and the retention capacity of spent oil on treated bark increases as the temperature augments. This implies that the retention mechanism is related to the capillary action. Results of Fourier transform infrared (FTIR) spectroscopy indicate that spent oil is mainly composed of alkanes. They also suggest that no chemical bonds between Tc and spent oil were established. Measurement of the surface tension of spent oil and the wetting index of the bark suggests that only spent oil will be retained by the substrate. Treatment of an industrial effluent containing 14.4 g/L of total HCs was performed using Tc. It was possible to remove 97% of HCs and retain some trace elements such as Al, Ca, Fe, Mg, S, and so on.     

Personal exposure to fine particulate matter in elderly subjects: relation between personal, indoor, and outdoor concentrations

The time-series correlation between ambient levels, indoor levels, and personal exposure to PM2.5 was assessed in panels of elderly subjects with cardiovascular disease in Amsterdam, the Netherlands, and Helsinki, Finland. Subjects were followed for 6 months with biweekly clinical visits. Each subject's indoor and personal exposure to PM2.5 was measured biweekly, during the 24-hr period preceding the clinical visits. Outdoor PM2.5 concentrations were measured at fixed sites. The absorption coefficients of all PM2.5 filters were measured as a marker for elemental carbon (EC). Regression analyses were conducted for each subject separately, and the distribution of the individual regression and correlation coefficients was investigated. Personal, indoor, and ambient concentrations were highly correlated within subjects over time. Median Pearson's R between personal and outdoor PM2.5 was 0.79 in Amsterdam and 0.76 in Helsinki. For absorption, these values were 0.93 and 0.81 for Amsterdam and Helsinki, respectively. The findings of this study provide further support for using fixed-site measurements as a measure of exposure to PM2.5 in epidemiological time-series studies.     

Levels of PCB 126 and PCB 153 in plasma and tissues in goats exposed during gestation and lactation

The aim of the present study was to gain knowledge about the disposition of the PCB congeners 126 and 153 in a goat model where pregnant does were given oral doses of PCB from day 60 of gestation until delivery. The goat kids were thus exposed to PCB during gestation and lactation. The doses of PCB 153 and PCB 126 were 98 and 49 ng/kg body wt/day, respectively. PCB levels were measured in plasma from the does at day 90 of gestation and at delivery, and in plasma from the kids at birth and four weeks post partum. Concentrations of PCB were analysed in brain, liver and fat tissue from the does six weeks after delivery and in liver and fat tissue from the kids at nine months of age. The ratio of estimated body burden to ingested dose in the does, was 0.95 +/- 0.07 for PCB 153 and 0.41 +/- 0.03 for PCB 126. Approximately 9% of PCB 153 and 6% of PCB 126 was transferred from the mothers to their kids during gestation and lactation. Prenatal exposure contributed to a much lower fraction of the body burden than postnatal PCB intake via milk, due to the fact that almost 100% of the PCB 153 transferred from the does to kids was transferred via milk, and the PCB 126 intake via milk was threefold higher than the calculated body burden. The hepatic PCB 126 concentration in both does and kids was significantly higher than the concentration in fat, in contrast to PCB 153, where the highest concentrations were found in fat. A significant difference in body burden between the does at delivery, the newborn kids, and the kids at four weeks of age, did not influence the plasma concentration of PCB 153 on a fat weight basis, which showed no difference with sampling time. Our results suggest that PCB 126 and PCB 153 have different pharmacokinetic properties. The higher levels of PCB 126 in liver tissue compared to fat tissue confirm the concept of hepatic sequestration. The similar blood concentration of PCB 153 in the does at delivery and their newborn kids despite the considerable difference in body burden, suggests a high degree of placental transfer. This supports previous observations that low molecular weight, lipid-soluble, non-polar chemicals reach the fetus to the greatest possible extent. For PCB 153, the body burden may provide the appropriate dose metric at steady state, but may give a minor underestimation of PCB 126 at low environmental exposure levels due to hepatic sequestration.     

Comparative study on the susceptibility of freshwater species to copper-based pesticides

Copper compounds have been intentionally introduced into water bodies as aquatic plant herbicides, algicides and molluscicides. Copper-based fertilizers and fungicides have been widely used in agriculture as well. Despite the fact that copper is an essential element for all biota, elevated concentrations of this metal have been shown to affect a variety of aquatic organisms. Nonetheless, comparative studies on the susceptibility of different freshwater species to copper compounds have seldom been performed. This study was conducted to compare toxicity of copper-based pesticides (copper oxychloride, cuprous oxide and copper sulfate) to different freshwater target (Raphidocelis subcapitata, a planktonic alga and Biomphalaria glabrata, a snail) and non-target (Daphnia similis, a planktonic crustacean and Danio rerio, a fish) organisms. Test water parameters were as follows: pH = 7.4 +/- 0.1; hardness 44 +/- 1 mg/l as CaCO3; DO 8-9 mg/l at the beginning and > 4 mg/l at the end; temperature, fish and snails 25 +/- 1 degrees C, Daphnia 20 +/- 2 degrees C, algae 24 +/- 1 degrees C. D. similis (immobilization), 48-h EC50s (95% CLs) ranging from 0.013 (0.011-0.016) to 0.043 (0.033-0.057) mg Cu/l, and R. subcapitata (growth inhibition), 96-h IC50s from 0.071 (0.045-0.099) to 0.137 (0.090-0.174) mg Cu/l, were the most susceptible species. B. glabrata (lethality), 48-h LC50s from 0.179 (0.102-0.270) to 0.854 (0.553-1.457) mg Cu/l, and D. rerio (lethality), 48-h LC50s 0.063 (0.045-0.089), 0.192 (0.133-0.272) and 0.714 (0.494-1.016) mg Cu/l, were less susceptible than Daphnia to copper-based pesticides. Findings from the present study therefore suggest that increased levels of copper in water bodies is likely to adversely affect a variety of aquatic species.