Modeling binomial amphibian roadkill data in distance sampling while accounting for zero-inflation,serial correlation and varying cluster sizes simultaneously

Roadkill is of ecological importance so that there is increasing academic research to understand the causes and patterns of roadkills and their impact on ecosystems. This work is motivated by the study on roadkills of endangered Bufo calamita (B. calamita) (The natterjack toad) out of amphibian roadkills. The status of B. calamita is regarded as unfavorable due to large population declines. In the mentioned study, B. calamita and total amphibian roadkills were recorded via distance sampling on a National Road of Southern Portugal between March 1995 and March 1997. The traditional binomial modeling of these data are challenged by three issues. First, the zeros in B. calamita counts far exceeded its nominal level. Second, there is likely serial correlation among observations along the road. Finally, there is varying number of total amphibian roadkills at each sampling location; therefore, there is likely randomness in the number of total amphibian roadkills. All these features may contribute to overdispersion in the binomial observations. These three issues are routinely addressed one at a time separately, the first through zero-inflated binomial models, the second, for example, by means of random effects models for serially correlated binomial data and the third by models for binomial data with random cluster sizes. Therefore the data cannot be adequately modeled by any of these separate models. In this paper, we propose a new model to tackle these three issues simultaneously in the binomial analysis of B. calamita roadkills out of amphibian roadkills. Our approach is generally applicable to other binomial data with these three features.     

Online sorting of recovered wood waste by automated XRF-technology. Part I: detection of preservative-treated wood waste

Waste wood is frequently contaminated with wood treatment preservatives including chromated copper arsenate (CCA) and alkaline copper quat (ACQ), both of which contain metals which contaminate recycled wood products. The objective of this research was to propose a design for online automated identification of As-based and Cu-based treated wood within the recovered wood waste stream utilizing an X-ray fluorescence (XRF) system, and to evaluate the detection parameters of such system. A full-scale detection unit was used for experimentation. Two main parameters (operational threshold (OT) and measurement time) were evaluated to optimize detection efficiencies. OTs of targeted metals, As and Cu, in wood were reduced to 0.02 and 0.05, respectively. The optimum minimum measurement time of 500 ms resulted in 98%, 91%, and 97% diversion of the As, Cu and Cr mass originally contained in wood, respectively. Comparisons with other detection methods show that XRF technology can potentially fulfill the need for cost-effective processing at large facilities (>30 tons per day) which require the removal of As-based preservatives from their wood waste stream.     

Hydrogeochemical comparison and effects of overlapping redox zones on groundwater arsenic near the Western (Bhagirathi sub-basin, India) and Eastern (Meghna sub-basin, Bangladesh) margins of the Bengal Basin

Although arsenic (As) contamination of groundwater in the Bengal Basin has received wide attention over the past decade, comparative studies of hydrogeochemistry in geologically different sub-basins within the basin have been lacking. Groundwater samples were collected from sub-basins in the western margin (River Bhagirathi sub-basin, Nadia, India; 90 samples) and eastern margin (River Meghna sub-basin; Brahmanbaria, Bangladesh; 35 samples) of the Bengal Basin. Groundwater in the western site (Nadia) has mostly Ca-HCO(3) water while that in the eastern site (Brahmanbaria) is much more variable consisting of at least six different facies. The two sites show differences in major and minor solute trends indicating varying pathways of hydrogeochemical evolution However, both sites have similar reducing, postoxic environments (p(e): +5 to -2) with high concentrations of dissolved organic carbon, indicating dominantly metal-reducing processes and similarity in As mobilization mechanism. The trends of various redox-sensitive solutes (e.g. As, CH(4), Fe, Mn, NO(3)(-), NH(4)(+), SO(4)(2-)) indicate overlapping redox zones, leading to partial redox equilibrium conditions where As, once liberated from source minerals, would tend to remain in solution because of the complex interplay among the electron acceptors.     

Conversion of chicken feather waste via hydrothermal carbonization: process optimization and the effect of hydrochar on seed germination of Acacia auriculiformis

Journal of Material Cycles and Waste Management - Using statistical response surface methodology this paper primarily investigates the role of process parameters at different levels (temperature,...     

Performance evaluation of biodiesel from used domestic waste oils: A review

Global warming, high-energy demand and availability of new technologies are among the factors catalyzing the search for alternative sources of energy. Currently, there is renewed interest in obtaining energy from wastes hitherto meant for disposal. Increased costs of disposal and their attendant problems of heavy environmental loading are some aspects making the disposal option unattractive. These wastes are sources of energy and among the several sources of generating this energy are the waste-to-energy (WTE) categories with potentials for useable fuel production. The WTE materials are mainly used domestic waste oils (UDWOs), municipal solid waste (MSW), agricultural and industrial wastes. However, the latter wastes are not attractive as they consist of innumerable hazardous contaminants. The UDWOs are arguably a safe and cost effective source of useable fuel. Their conversion offers the merits of a reduction in greenhouse gas emission (GHG), enhancing fuel diversification and a qualitatively comparable energy output to fossil diesel fuels. Thus, UDWOs could significantly contribute towards achieving the 2020 and 2030 goals of substituting approximately 20% and 30% of petro-diesel with biofuels in US and EU, respectively. Moreover, attaining the forecasted annual production rate of 227 billion liters of biofuel by most active stakeholders in the biodiesel industry could be easily achieved.This review aims to analyze the performance of biodiesel fuels obtained from UDWO and to demonstrate the suitability of applying these fuels as substitutes to mineral diesel in various industries. Benefits of UDWO as a biodiesel feedstock were as well highlighted.     

Impact of environmental production conditions on productivity and efficiency: a case study of wheat farmers in Bangladesh

Environmental conditions significantly affect production, but are often ignored in studies analysing productivity and efficiency leading to biased results. In this study, we examine the influence of selected environmental factors on productivity and efficiency in wheat farming in Bangladesh. Results reveal that environmental production conditions significantly affect the parameters of the production function and technical efficiency, as well as correlates of inefficiency. Controlling for environmental production conditions improves technical efficiency by 4 points (p<0.01) from 86% to 90%. Large farms are more efficient relative to small and medium sized farms (p<0.01 and 0.05), with no variation among regions. Policy implications include soil fertility improvement through soil conservation and crop rotation, improvement in managerial practices through extension services and adoption of modern technologies, promotion of education, strengthening the research-extension link, and development of new varieties that have higher yield potential and are also suitable for marginal areas.     

Effects of environmental hypercapnia on hemato-immunological parameters,carbonic anhydrase,and Na+, K+-ATPase enzyme activities in rainbow trout (Oncorhynchus mykiss) tissues

In this study, the effects of environmental hypercapnia on hemato-immunological parameters and the activities of respiratory enzymes such as carbonic anhydrase (CA) and Na⁺, K⁺-ATPase were investigated in rainbow trout (Oncorhynchus mykiss) tissues (gill, liver and kidney). Batches of 12 fish were exposed to 4.5 mg L^?1 (control) and 14 mg L^?1 CO₂. No mortalities occurred during the 14 days of the experimental period. Red blood cell (RBC), hemoglobin (Hb), and hematocrit (Ht) levels, and innate immune parameters such as nitro blue tetrazolium (NBT), lysozyme, and myeloperoxidase activities, and the melano-macrophage frequency were negatively affected by elevated CO₂ levels. Patterns of change in CA activity differed among the gill, liver, and kidney. Compared with the activities of CA in the control group, the CA enzyme was significantly stimulated at day 7 in the gill tissue, whereas it was stimulated at day 14 of the experiment in the liver tissue of fish exposed to 14 mg L^?1 CO₂ (P < 0.05). In contrast to the pattern of CA enzyme activities, the Na⁺, K⁺-ATPase enzymes were stimulated significantly in the liver after day 7 but inhibited in the kidney and gill (P < 0.05). These results suggest that a subchronic exposure to hypercapnia of rainbow trout tissues may lead to adaptive changes in the respiratory enzymes and negatively affects hemato-immunological parameters.     

Bio-intervention phyto-based material for raw goatskin preservation: a cleaner-sustainable approach

Environmental Science and Pollution Research - The regular practice of using sodium chloride to preserve raw animal skin triggers increasing salinity and total dissolved solids (TDS) in the surface...     

The perception of Malaysian pedestrians toward the use of footbridges

Objective: The footbridge is a vital structure in the road network and a cornerstone among crossing facilities. Yet, it suffers from low usage by pedestrians as they try to cross the street on the level. This study aims to analyze the perceptions of Malaysian pedestrians toward the use of footbridges with the consideration of different factors.

Method: The study was carried out by collecting data from field observation and questionnaire distribution on the street among the public. The data were statistically analyzed by applying multiple linear regression models and a series of chi-square tests.

Results: The study found that the most influential factor cited by pedestrians in decision making regarding using a footbridge is the existence of an escalator. Being in a hurry and the fear of heights were significantly associated with choosing not to use a footbridge. Zebra crossing was chosen as the most favorable type of crossing facility by the majority of respondents. In addition, installation of a fence and barriers was proposed as an effective procedure to prevent jaywalking. To construct new and efficient footbridges in the future, the study suggests consideration of traffic volume, posted speed limit, and the number of lanes, because these are the most influential factors to predict the usage rate.

Conclusions: The study encourages decision makers and stakeholders to consider providing escalators for new footbridges to enhance the safety of pedestrians.