Potential negative consequences of adding phosphorus-based fertilizers to immobilize lead in soil

A study of the potential negative consequences of adding phosphate (P)-based fertilizers as amendments to immobilize lead (Pb) in contaminated soils was conducted. Lead-contaminated firing range soils also contained elevated concentrations of antimony (Sb), a common Pb hardening agent, and some arsenic (As) of unknown (possibly background) origin. After amending the soils with triple superphosphate, a relatively soluble P source, column leaching experiments revealed elevated concentrations of Sb, As, and Pb in the leachate, reflecting an initial spike in soluble Pb and a particularly dramatic increase in Sb and As mobility. Minimal As, Sb, and Pb leaching was observed during column tests performed on non-amended control soils. In vitro extractions tests were performed to assess changes in Pb, As, and Sb bioaccessibility on P amendment. Lead bioaccessibility was systematically lowered with increasing P dosage, but there was much less of an effect on As and Sb bioaccessibility than on mobility. Our results indicate that although P amendments may aid in lowering the bioaccessibility of soil-bound Pb, it may also produce an initial increase in Pb mobility and a significant release of Sb and As from the soil, dramatically increasing their mobility and to a lesser extent their bioavailability.     

Estimating population impacts via dynamic occupancy analysis of Before-After Control-Impact studies

Estimating environmental impacts on populations is one of the main goals of wildlife monitoring programs, which are often conducted in conjunction with management actions or following natural disturbances. In this study we investigate the statistical power of dynamic occupancy models to detect changes in local survival and colonization from detection-nondetection data, while accounting for imperfect detection probability, in a Before-After Control-Impact (BACI) framework. We simulated impacts on local survival and/or detection probabilities, and asked questions related to: (1) costs and benefits of different analysis models, (2) confounding changes in detection with changes in local survival, (3) sampling design trade-offs, and (4) species with low vs. high rates of turnover. Estimating seasonal effects on local survival and colonization, as opposed to estimating Before-After effects, had little effect on the power to detect changes in local survival. Estimating a parameter that accounted for pretreatment differences in local survival between Control and Impact sites decreased power by 50%, but it was critical to include when such differences existed. When the experimental treatment had a negative impact on species detectability but analysis assumed constant detection, the Type I error rates were dramatically inflated (0.20 0.33). In general, there was low power (< 0.5) to detect a 50% decrease in local survival for all combinations of sites (N = 50 vs. 100), seasons sampled (8 vs. 12), and visits per site per season (4 vs. 6). Unbalanced designs performed worse than balanced designs, with the exception of the case of treatments being implemented in different seasons at different sites. Adding more control sites improved the ability to detect changes in local survival. Surveying more seasons after impact resulted in modest power gains, but at least three seasons before impact were required to successfully implement BACI occupancy studies. Turnover rates had a low impact on power. Occupancy studies conducted in a BACI design offer the opportunity to detect environmental impacts on wildlife populations without the costs of intensive studies. However, given the low power to detect small changes (20%) in local survival, these studies should be used when researchers are confident that major treatment impacts will occur or very large sample sizes are obtainable.     

Mapping opportunities and challenges for rewilding in Europe

Farmland abandonment takes place across the world due to socio‐economic and ecological drivers. In Europe agricultural and environmental policies aim to prevent abandonment and halt ecological succession. Ecological rewilding has been recently proposed as an alternative strategy. We developed a framework to assess opportunities for rewilding across different dimensions of wilderness in Europe. We mapped artificial light, human accessibility based on transport infrastructure, proportion of harvested primary productivity (i.e., ecosystem productivity appropriated by humans through agriculture or forestry), and deviation from potential natural vegetation in areas projected to be abandoned by 2040. At the continental level, the levels of artificial light were low and the deviation from potential natural vegetation was high in areas of abandonment. The relative importance of wilderness metrics differed regionally and was strongly connected to local environmental and socio‐economic contexts. Large areas of projected abandonment were often located in or around Natura 2000 sites. Based on these results, we argue that management should be tailored to restore the aspects of wilderness that are lacking in each region. There are many remaining challenges regarding biodiversity in Europe, but megafauna species are already recovering. To further potentiate large‐scale rewilding, Natura 2000 management would need to incorporate rewilding approaches. Our framework can be applied to assessing rewilding opportunities and challenges in other world regions, and our results could guide redirection of subsidies to manage social‐ecological systems.     

Growth and development of nauplii and copepodites of the estuarine copepod Acartia tonsa from southern Europe (Ria de Aveiro, Portugal) under saturating food conditions

A temperature-dependent growth model is presented for nauplii and copepodites of the estuarine calanoid copepod Acartia tonsa from southern Europe (Portugal). Development was followed from egg to adult in the laboratory at four temperatures (10, 15, 18 and 22°C) and under saturating food conditions (>1,000 μg C l⁻¹). Development times versus incubation temperature were fitted to a Belehradek’s function, showing that development times decreased with increasing incubation temperature: at 10°C, A. tonsa need 40.3 days to reach adult stage, decreasing to 8.9 days when reared at 22°C. ANCOVA (homogeneity of slopes) showed that temperature (P<0.001) and growth phase (P<0.01) had a significant effect on the growth rate. Over the range of temperatures tested in this study, highest weight-specific growth rates were found during naupliar development (NI–NVI) and varied from 0.185 day⁻¹ (10°C) to 0.880 day⁻¹ (22°C) with a Q ₁₀ equal to 3.66. During copepodite growth (CI–CV), the weight-specific growth rates ranged from 0.125 day⁻¹ (10°C) to 0.488 day⁻¹ (22°C) with a Q ₁₀ equal to 3.12. The weight-specific growth rates (g) followed temperature (T) by a linear relationship and described as ln g=−2.962+0.130 T (r ²=0.99, P<0.001) for naupliar stages and ln g=−3.134+0.114T (r ²=0.97, P<0.001) for copepodite stages. By comparing in situ growth rates (juvenile growth and fecundity) for A. tonsa taken from the literature with the temperature-dependent growth model defined here we suggest that the adult females of A. tonsa are more frequently food limited than juveniles.     

Mineralogy, morphology, and textural relationships in coatings on quartz grains in sediments in a quartz-sand aquifer

Mineralogical studies of coatings on quartz grains and bulk sediments from an aquifer on Western Cape Cod, Massachusetts, USA were carried out using a variety of transmission electron microscopy (TEM) techniques. Previous studies demonstrated that coatings on quartz grains control the adsorption properties of these sediments. Samples for TEM characterization were made by a gentle mechanical grinding method and focused ion beam (FIB) milling. The former method can make abundant electron-transparent coating assemblages for comprehensive and quantitative X-ray analysis and the latter technique protects the coating texture from being destroyed. Characterization of the samples from both a pristine area and an area heavily impacted by wastewater discharge shows similar coating textures and chemical compositions. Major constituents of the coating include Al-substituted goethite and illite/chlorite clays. Goethite is aggregated into well-crystallized domains through oriented attachment resulting in increased porosity. Illite/chlorite clays with various chemical compositions were observed to be mixed with goethite aggregates and aligned sub-parallel to the associated quartz surface. The uniform spatial distribution of wastewater-derived phosphorus throughout the coating from the wastewater-contaminated site suggests that all of the coating constituents, including those adjacent to the quartz surface, are accessible to groundwater solutes. Both TEM characterization and chemical extraction results indicate there is a significantly greater amount of amorphous iron oxide in samples from wastewater discharge area compared to those from the pristine region, which might reflect the impact of redox cycling of iron under the wastewater-discharge area. Coating compositions are consistent with the moderate metal and oxy-metalloid adsorption capacities, low but significant cation exchange capacities, and control of iron(III) solubility by goethite observed in reactive transport experimental and modeling studies conducted at the site.     

Strategies for applying gray water effluent on ornamental sunflower crops

Environmental Science and Pollution Research - In a context of scarcity of good quality water, reuse is a mandatory practice to increase water availability, thus allowing the exploitation of more...     

CLIMATE CHANGE,IRRIGATION, AND CROP RESPONSE1

ABSTRACT: A set of simulation models consisting of a weather generator, and irrigation supply, soil moisture and crop growth components was used to evaluate the impacts of climate change on irrigated corn in locations near Albany, New York, Indianapolis, Indiana, and Oklahoma City, Oklahoma. The models evaluated the combined effects of modified water demand, supply and crop management (planting date, cultivar selection, irrigation). Simulations were duplicated for 100-year weather sequences based on current (1961–1988) weather statistics, and statistics modified by outputs from the GFDL GCM runs showing the effects from doubling of atmospheric CO₂. Climate impacts differed greatly with location and management. Effects were most adverse in New York and least damaging in Indiana. At all sites, the beneficial effects of longer growing season and increased water supply were generally overcome by the detrimental impacts of increased evapotranspiration and reduced solar radiation during plant maturing stages. Adverse impacts of climate change can be substantially reduced by irrigation and appropriate selection of planting dates and cultivars.     

Are Roadkill Hotspots in the Cerrado Equal Among Groups of Vertebrates?

Environmental Management - Understand the spatial distribution of wildlife roadkill is necessary to design mitigation measures minimizing damage to the fauna and the human population. Thus, we...     

Floating aquatic macrophytes for the treatment of aquaculture effluents

Environmental Science and Pollution Research - Aquaculture is an activity with economic and social importance since it generates food, employment, and income. However, like other human activities,...