生物法-人工湿地组合工艺处理小城镇混合污水研究

为适应小城镇污水处理高效、低耗、管理简单的要求,开展了生物法(水解酸化/生物接触氧化)-人工湿地组合工艺(A/BCO-CW)处理小城镇片区混合污水的研究。结果表明,A/BCO系统在停留时间为3～6 h条件下,对悬浮物和有机物有高的去除效率,COD、BOD5和TSS去除率分别达到63.1%、67.7%和66.2%,避免了人工湿地堵塞和提高处理效率,减少了所需湿地面积44%。全年运行结果表明,在0.30～0.59 m/d水力负荷率下,垂直流-表面流-水平潜流人工湿地组合系统对COD、BOD5和TSS平均去除负荷达9.4、5.1和7.2 g/(m2.d)(42%、71.2%和85.2%);COD、BOD5去除速率常数为74.6±12.1 m/y、166±30.5 m/y,这些数值均处于文献中k值范围的高量程内。A/BCO-人工湿地系统对COD、BOD5和TSS具有好的处理效果,出水水质能够稳定达到《地表水环境质量标准》(GB 3838-2002)的IV类水标准,2种处理方法有效组合起来,所开发的低成本、高效率、可持续运行的城镇废水处理组合系统,将会在实际应用尤其是高有机负荷污水处理中发挥良好效用。     

采用温度梯度凝胶电泳(TGGE)分析消毒剂对池塘型微宇宙细菌群落结构的影响

构建6个池塘型微宇宙模拟水生态系统,1个设为对照组,试验组连续投加次氯酸钠13 d,投加剂量分别为1.0、2.5、5.0、10.0、20.0 mg/L,停止投加后再观察10 d.试验期间对各微宇宙分别进行8次采样,经37 ℃培养后提取细菌总DNA,进行16S rDNA V3区扩增后,对扩增产物进行TGGE分析.对TGGE图谱中的主要条带进行回收、重新扩增、克隆、建库、测序以及序列分析.结果显示,消毒剂进入环境后会对细菌群落结构产生影响,但不同剂量消毒剂产生的影响有显著差异,存在明显的剂量-效应关系:低剂量消毒剂对细菌群落结构的影响比较小,而且是可逆的,微宇宙系统对消毒剂逐渐适应后其群落结构即可恢复;而高剂最消毒剂对细菌群落结构的破坏比较大,且不可逆转,即使消毒剂停止投加后也不能恢复.说明盲目的过量投加消毒剂会对水体微生态环境造成严重破坏.图4表1参10     

Persistent organic pollutants and heavy metals in adipose tissues of patients with uterine leiomyomas and the association of these pollutants with seafood diet, BMI, and age

Background, aim, and scope  

Persistent organic pollutants and heavy metals can cause diseases in women, however, the relationships of these pollutants and uterine leiomyomas (UL), which are non-cancerous tumors of the uterus, are unclear. This study focused on the quantification of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs), and heavy metals in subcutaneous and visceral fat obtained from patients with UL and in subcutaneous fat of a control group of women without UL to determine if there were any correlations between concentrations of persistent organic pollutants (POPs) and heavy metals and the incidence of UL.     

重大事故移动监测和指挥平台AKY-MCP的设计与实现

介绍了重大事故移动监测和指挥平台AKY-MCP的设计与实现。该平台能够快速、及时、准确地被部署,并收集应急指挥需要的各种现场信息,满足应急指挥人员进行沟通、指挥、调度对现场数据采集、处理和传输的需要,为应急指挥提供现场信息检测和辅助决策平台。该系统已经得到成功的应用,并取得了良好的效果。重大事故移动监测和指挥平台AKY-MCP,能更有效的监测事故现场情况,快速进行处置,降低生命财产的损失。重大事故移动监测和指挥平台AKY-MCP,能够在事故现场进行快速部署,对应急指挥进行辅助决策,并把现场视频图像信息、有毒有害气体浓度信息、GPS信息、现场地形位置信息和现场风速风向等信息实时发送到远端的指挥中心,为领导和专家提供现场资料,有利于及时决策、控制事故后果蔓延,维护社会稳定和人民财产安全。     

A pyrazine based metal-organic framework for selective removal of copper from strongly acidic solutions

● pz-UiO-66 was synthesized facilely by a solvothermal method. ● Efficient capture of copper from highly acidic solution was achieved by pz-UiO-66. ● pz-UiO-66 exhibited excellent selectivity and capacity for copper capture. ● Pyrazine-N in pz-UiO-66 was shown to be the dominant adsorption site. The selective capture of copper from strongly acidic solutions is of vital importance from the perspective of sustainable development and environmental protection. Metal organic frameworks (MOFs) have attracted the interest of many scholars for adsorption due to their fascinating physicochemical characteristics, including adjustable structure, strong stability and porosity. Herein, pz-UiO-66 containing a pyrazine structure is successfully synthesized for the efficient separation of copper from strongly acidic conditions. Selective copper removal at low pH values is accomplished by using this material that is not available in previously reported metal–organic frameworks. Furthermore, the material exhibits excellent adsorption capacity, with a theoretical maximum copper uptake of 247 mg/g. As proven by XPS and FT-IR analysis, the coordination of pyrazine nitrogen atoms with copper ions is the dominant adsorption mechanism of copper by pz-UiO-66. This work provides an opportunity for efficient and selective copper removal under strongly acidic conditions, and promises extensive application prospects for the removal of copper in the treatment for acid metallurgical wastewater.     

小车式开关柜内接头过热故障与预防

近年来,小车式开关柜得到广泛的应用。本文通过对小车式开关柜的运行现状与接头过热故障的分析,指出了造成此类故障的主要原因,并对预防此类故障的方法进行了研究、分析,最后指出了可行、实用的监视方法。该方法在电网中的推广应用具有一定的意义。     

Rational construction of Co-promoted 1T-MoS2 nanoflowers towards high-efficiency 4-nitrophenol reduction

Environmental Science and Pollution Research - Developing efficient and cost-effective non-noble metal catalysts for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) is of great...     

Biohydrogen production using waste activated sludge as a substrate from fructose-processing wastewater treatment

Biohydrogen production by dark fermentation in a series of batch tests under different environmental control conditions was evaluated to determine the optimal initial cultivation pH and temperature for a continuous-flow kinetic test to validate the kinetic model system. The waste activated sludge (WAS) from fructose-processing manufacturing was used as the model substrate for biohydrogen production. The batch experiments for biohydrogen production were conducted in a 6 l bioreactor. Fifteen batch kinetic tests were investigated when pH was controlled at 6, 7, 8 and 9 as well as the temperature was controlled at 37 °C, 45 °C and 55 °C, respectively. The experimental results indicated that the optimal operational condition for hydrogen production occurred while pH was 7 and temperature was 55 °C with the highest hydrogen production of 7.8 mmol. The optimal recovery time for hydrogen was 25 h in the batch experiments. Furthermore, the kinetic test of biohydrogen production was performed by anaerobic mixed microbial culture in the continuous-flow experiment when pH and temperature was maintained at 7 and 55 °C. Approximately 60% and 7% of substrate solution was converted into acetate and hydrogen, respectively, at the steady state. Roughly only 0.77% and 2.7% of substrate solution was converted into propionate and butyrate, respectively, at a steady-state condition. The experimental and modeling approaches presented in this study could be employed for the design of pilot-scale and full-scale anaerobic biohydrogen fermentors using food-processing waste activated sludge (WAS) as a substrate solution.     

旋转式滗水器设计的动力学计算

在对旋转式滗水器进行了水力学和运动学计算的基础上，对旋转式滗水器进行了动力学计算，给出了其动力学计算公式，与水力学和运动学计算公式一起，共同给出了旋转式滗水器完整的设计计算公式。     

多循环CCRs法在分离燃煤锅炉尾部烟气中CO2方面的应用

随着温室效应和全球变暖的加剧,煤燃烧所排出的CO2作为引起温室效应的主要气体而引起人们的密切关注.由于燃煤锅炉所排放的尾气中所含的CO2的体积份额低、排放量大,而且处于微负压状态,因此目前控制和分离吸收CO2的方法,包括各类吸收法、吸附法、膜分离法和O2/CO2燃烧技术等,能够经济可行地适用于电力工业燃煤锅炉尾部烟气中CO2分离的方法非常少.与上述各类方法相比,钙基吸收剂CCRs(calcination/carbonation reactions)法是一种新兴的经济可行的分离燃煤锅炉尾部烟气中CO2的方法.对采用该法时,吸收剂的选择、吸收剂在多次CCRs过程中结构特点的变化、提高吸收剂对CO2的吸收容量以及防止吸收剂反应性的衰减等方面进行了详细的阐述.