Conceptualizing and communicating management effects on forest water quality

We present a framework for evaluating and communicating effects of human activity on water quality in managed forests. The framework is based on the following processes: atmospheric deposition, weathering, accumulation, recirculation and flux. Impairments to water quality are characterized in terms of their extent, longevity and frequency. Impacts are communicated using a “traffic lights” metaphor for characterizing severity of water quality impairments arising from forestry and other anthropogenic pressures. The most serious impairments to water quality in managed boreal forests include (i) forestry activities causing excessive sediment mobilization and extirpation of aquatic species and (ii) other anthropogenic pressures caused by long-range transport of mercury and acidifying pollutants. The framework and tool presented here can help evaluate, summarize and communicate the most important issues in circumstances where land management and other anthropogenic pressures combine to impair water quality and may also assist in implementing the “polluter pays” principle.     

Metals and organic pollutants in snow surrounding an iron factory

To estimate air pollution snow samples were collected in March 2001 at six sites in the vicinity of the Kostomuksha factory in Karelia. Seventy-two chemical elements and more than 200 individual organic compounds were identified by inductively coupled plasma mass spectrometry (ICP-MS) and gas chromatography mass spectrometry (GC-MS). It was found that the levels of Li, B, Al, Fe, Ni, Cu, Zn, Hg, Mn, Mo as well as hydrocarbons, phthalates and phenols exceeded the existing maximum allowable concentrations. A list of toxicants emitted with the factory exhausts and a list of priority pollutants for Kostomuksha were compiled. The impact of the exhausts of the Kostomuksha factory on the environment in Finland is relatively small. Electronic Publication     

Male mating preference is associated with risk of pre-copulatory cannibalism in a socially polymorphic spider

We performed male attraction experiments and staged courtship sequences to test for non-random mating with respect to social behavioral phenotype in the comb-footed spider, Anelosimus studiosus. While asocial behavior is the dominant phenotype in all A. studiosus populations examined to date, a social phenotype approaches a frequency of 15% in colder environments. We collected test subjects from higher latitude polymorphic populations and scored all individuals as to their behavioral phenotype prior to their use in these trials. Males of both phenotypes differentially approached and courted social females over asocial females and no-spider controls. By offering males different numbers of females of one type vs. the other in subsequent trials, we determined that the difference in attractiveness between the two phenotypes social/asocial is 1.5/1. Both the web produced by a female and a female that has been removed from its web attract males. We suggest that the male attracting pheromone is present on females and is also attached to silk threads. Staged encounters completed between males and females of the respective phenotypes demonstrated that courting males suffer significantly less pre-copulatory sexual cannibalism with social females than with asocial ones, and thus, female social tendency is phenotypically linked to sexual aggression. We propose that the male preference for social females is adaptive because of the observed asymmetry in courtship success.     

The Synthesis and FTIR, Kinetics and TG/DTG/DTA Study of Inter Penetrating Polymer Networks (IPNs) Derived from Polyurethanes of Glycerol Modified Castor Oil and Cardanol Based Dyes

Interpenetrating polymer networks from agricultural products such as glycerol modified castor oil polyurethanes and cardanol based dyes have not been extensively studied so far. Such polymers were synthesized using benzoyl peroxide as initiator and ethylene glycol dimethacrylate as cross-linker. Characterizations of these polymers were performed by Fourier Transform infra red spectra and thermal analysis techniques such as thermogravimetric analysis, derivative thermogravimetry and differential thermal analysis. The kinetic parameters such as activation energies and orders of reaction were estimated by using Freeman?CAnderson??s method. The effects of changes in polyurethane to dye monomer weight ratio and NCO/OH molar ratio of polyurethanes on the properties of such polymers were studied.     

Patterns of soil copper contamination and temporal changes in vegetation in the vicinity of a copper rod rolling factory

Patterns of soil copper contamination have been examined in the vicinity of a copper rod rolling plant in Prescot, Merseyside, UK. The site, established in 1975, was found to possess clear patterns of soil copper contamination, with the highest levels of HNO3 and water-extractable fractions encountered in the factory grounds adjacent to the location of the furnace chimney. The majority of the copper had accumulated in the upper soil horizons. The site is surrounded by planted lawns, established at different times after the commissioning of the plant. The species composition of the extant grassland communities, found at sites with differing soil copper levels, was compared to the composition of the original seed mixtures sown at each of ten sites. These surveys clearly showed that different levels of soil copper contamination had produced significant changes in grassland composition with time. At the most polluted site, copper tolerant Agrostis capillaris clones were the main grasses present only two years after the area was sown with a four-species mixture of non-tolerant grass seed. Lolium perenne possessed extreme sensitivity to copper. A number of dicotyledonous species, normally considered sensitive to elevated copper levels, were found to be unaffected where such conditions had arisen after plants had established from seed.     

Radium-226 in water, sediments, and fish from lakes near the city of Elliot Lake, Ontario, Canada

Ra-226 was measured by alpha-emission spectroscopy in water, sediments, and fish (tissues and gut contents), from five lakes in a watershed containing U mining and milling operations at Elliot Lake, Ontario, and from control lakes in an adjacent non-industrialized watershed. Ra-226 transfer parameters from lake water and sediments to fish tissues, and annual intakes by humans consuming fish, were estimated. Mean dissolved 226Ra levels ranged from approximately 76 mBq litre(-1) in water of the most affected lake, to < 10 mBq litre(-1) in control lakes. Levels in summer were consistently higher than in fall or winter; no consistent variation with depth was noted. Sediment levels ranged from approximately 3000 mBq g(-1) dry wt in one study lake to < 100 mBq g(-1) dry wt of sediment in control lakes. Bone 226Ra concentrations were higher than in muscle. The lake trout (Salvelinus namaycush), a predatory secondary consumer, had bone 226Ra levels (< 20 mBq g(-1) dry wt) that did not show significant site variation. In contrast, bottom feeding whitefish had significantly more 226Ra in bone tissue (to 38 mBq g(-1) dry wt in the lake whitefish, Coregonus clupeaformis, and 76 mBq g(-1) in round whitefish, Prosopium cylindraceum) in study lakes than in controls (< 20 mBq g(-1) dry wt). Ra-226 levels in lake trout muscle were low and showed erratic variation among lakes whereas levels in whitefish muscle did not vary significantly among study and control sites. Lake herring (= cisco, Coregonus artedii), a planktivorous fish taken only from Quirke Lake, had mean 226Ra levels of 18 and 1.4 mBq g(-1) dry wt in bone and muscle, respectively. Gut 226Ra levels, highest in lake trout from McCabe and Quirke Lakes (126 +/- 53, 64 +/- 44 mBq g(-1) dry wt, respectively), and just detectable in McCabe and Elliot Lake whitefish (24 +/- 2, 36 +/- 14 mBq g(-1) dry wt, respectively), were below detection in lake trout and whitefish from other lakes. Concentration ratios (CRs) of 226Ra from water to muscle ranged from 8 to 14 in lake trout, 7 to 14 in whitefish, and 4 to 6 in lake herring. The water to bone CRs varied from 81 to 142, 314 to 548, and 126 to 272 in the same species. CRs were always < 1 between sediments and fish tissues. Annual intake of 226Ra by human consumers of these fish was estimated to provide an effective dose of 0.003 mSv year(-1). This represents a small fraction of both natural background (> 2 mSv year(-1)) and the public dose limit (5 mSv year(-1)).     

Development of a microscale emission factor model for particulate matter for predicting real-time motor vehicle emissions

The U.S. Environmental Protection Agency's National Exposure Research Laboratory is pursuing a project to improve the methodology for modeling human exposure to motor vehicle emissions. The overall project goal is to develop improved methods for modeling the source through the air pathway to human exposure in significant exposure microenvironments. Current particulate matter (PM) emission models, particle emission factor model (used in the United States, except California) and motor vehicle emission factor model (used in California only), are suitable only for county-scale modeling and emission inventories. There is a need to develop a site-specific real-time emission factor model for PM emissions to support human exposure studies near roadways. A microscale emission factor model for predicting site-specific real-time motor vehicle PM (MicroFacPM) emissions for total suspended PM, PM less than 10 microm aerodynamic diameter, and PM less than 2.5 microm aerodynamic diameter has been developed. The algorithm used to calculate emission factors in MicroFacPM is disaggregated, and emission factors are calculated from a real-time fleet, rather than from a fleet-wide average estimated by a vehicle-miles-traveled weighting of the emission factors for different vehicle classes. MicroFacPM requires input information necessary to characterize the site-specific real-time fleet being modeled. Other variables required include average vehicle speed, time and day of the year, ambient temperature, and relative humidity.     

Chemical evaluation of odor reduction by soil injection of animal manure

Field application of animal manure is a major cause of odor nuisance in the local environment. Therefore, there is a need for methods for measuring the effect of technologies for reducing odor after manure application. In this work, chemical methods were used to identify key odorants from field application of pig manure based on experiments with surface application by trailing hoses and soil injection. Results from three consecutive years of field trials with full-scale equipment are reported. Methods applied were: membrane inlet mass spectrometry (MIMS), proton-transfer-reaction mass spectrometry (PTR-MS), gold-film hydrogen sulfide (H?S) detection, all performed on site, and thermal desorption gas chromatography with mass spectrometry (TD-GC/MS) based on laboratory analyses of field samples. Samples were collected from a static flux chamber often used for obtaining samples for dynamic olfactometry. While all methods were capable of detecting relevant odorants, PTR-MS gave the most comprehensive results. Based on odor threshold values, 4-methylphenol, H?S, and methanethiol are suggested as key odorants. Significant odorant reductions by soil injection were consistently observed in all trials. The flux chamber technique was demonstrated to be associated with critical errors due to compound instabilities in the chamber. This was most apparent for H?S, on a time scale of a few minutes, and on a longer time scale for methanethiol.     

Carbon mitigation potential and costs of forestry options in Brazil,China, India,Indonesia, Mexico,the Philippines and Tanzania

This paper summarizes studies of carbon (C) mitigation potential and costs of about 40 forestry options in seven developing countries. Each study uses the same methodological approach – Comprehensive Mitigation Assessment Process (COMAP) – to estimate the above parameters between 2000 and 2030. The approach requires the projection of baseline and mitigation land-use scenarios. Coupled with data on a per ha basis on C sequestration or avoidance, and costs and benefits, it allows the estimation of monetary benefit per Mg C, and the total costs and carbon potential. The results show that about half (3.0 Pg C) the cumulative mitigation potential of 6.2 Petagram (Pg) C between 2000 and 2030 in the seven countries (about 200× 10⁶ Mg C yr^-1) could be achieved at a negative cost and the remainder at costs ranging up to $100 Mg C^-1. About 5 Pg C could be achieved, at a cost less than $20 per Mg C. Negative cost potential indicates that non-carbon revenue is sufficient to offset direct costs of these options. The achievable potential is likely to be smaller, however, due to market, institutional, and sociocultural barriers that can delay or prevent the implementation of the analyzed options.