Characteristics of element distributions in an MSW ash melting treatment system

Thermal treatment of municipal solid waste (MSW) has become a common practice in waste volume reduction and resource recovery. For the utilization of molten slag for construction materials and metal recovery, it is important to understand the behavior of heavy metals in the melting process. In this study, the correlation between the contents of elements in feed materials and MSW molten slag and their distributions in the ash melting process, including metal residues, are investigated. The hazardous metal contents in the molten slag were significantly related to the contents of metals in the feed materials. Therefore, the separation of products containing these metals in waste materials could be an effective means of producing environmentally safe molten slag with a low hazardous metals content. The distribution ratios of elements in the ash melting process were also determined. The elements Zn and Pb were found to have a distribution ratio of over 60% in fly ash from the melting furnace and the contents of these metals were also high; therefore, Zn and Pb could be potential target metals for recycling from fly ash from the melting furnace. Meanwhile, Cu, Ni, Mo, Sn, and Sb were found to have distribution ratios of over 60% in the metal residue. Therefore, metal residue could be a good resource for these metals, as the contents of Cu, Ni, Mo, Sn, and Sb in metal residue are higher than those in other output materials.     

Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion

It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction.     

Amelioration effect of humic acid extracted from solubilized excess sludge on saline-alkali soil

In this study, the main characteristics and soil amendment effects on the saline–alkali soil of humic acid extracted from solubilized excess sludge (SS-HA) were investigated. The excess sludge was solubilized prior to extraction to improve the humic acid recovery rate. The structural features of SS-HA were characterized by an elemental analysis, Fourier transform infrared spectroscopy, and ¹H-nuclear magnetic resonance spectroscopy, and compared with those of HA extracted from non-solubilized excess sludge (ES-HA). The results showed that extraction efficiency of humic acid was enhanced by using solubilization, although structural properties of humic acid extracted from solubilized excess sludge were almost the same as those of ES-HA. To study a utilization method of SS-HA, the soil amendment effects on saline–alkali soil by mixture of SS-HA were investigated with a model soil-column experiment. SS-HA reduced the pH of the saline–alkali soil, and the effect was immediately observed or faster than the case in which only peat is added. Moreover, the cation exchangeable capacity of the saline–alkali soil was enhanced by addition of SS-HA.     

Evaluation of buckwheat and barley tea wastes as ethanol fermentation substrates

Buckwheat tea waste (BWTW) and barley tea waste (BTW), by-products of the beverage industry, are alternative carbohydrate sources for ethanol production. In this study, optimal enzyme loading for enzymatic saccharification of BWTW and BTW was determined, and simultaneous saccharification and fermentation (SSF) was performed by Saccharomyces cerevisiae and Mucor indicus to produce ethanol. Optimal enzyme loading for enzymatic saccharification of 2?% w/v BWTW and BTW was 0.5?% (weight of enzyme/weight of tea wastes) for BWTW and 0.1?% for BTW. Ethanol production from BWTW by S. cerevisiae and M. indicus after 48?h of SSF was 49.9/100?g of BWTW and 47.9/100?g of BWTW, respectively, with 0.5?% enzyme loading. Ethanol production from BTW by S. cerevisiae and M. indicus after 48?h of SSF was 20.5/100?g of BTW and 21.6/100?g of BTW, corresponding to 62 and 66?% of the theoretical yield based on starch content, respectively, with 0.1?% of enzyme loading. Furthermore, S. cerevisiae produced 76?% of the theoretical yield based on the total glucose from starch in BWTW and BTW when a mixture of BWTW and BTW was used as a substrate, with 0.2?% enzyme loading and no additional nitrogen or mineral sources.     

Evaluation of the impact of matrix effects in LC/MS measurement on the accurate quantification of neonicotinoid pesticides in food by isotope-dilution mass spectrometry

The use of isotope-labeled internal standards is the most widely accepted approach to overcome the matrix effects on quantification of pesticides in food by LC/MS. We evaluated the impact of the matrix effects on quantification of six neonicotinoid pesticides, acetamiprid, clothianidin, dinotefuran, imidacloprid, thiacloprid, and thiamethoxam, in food by using deuterated internal standards. The calibration curves for each pesticide were obtained by using matrix-free and matrix-matched calibration solutions with blank brown rice, carrot, and green onion extracts. For brown rice and carrot, the matrix effects were not observed. In contrast, the slopes of calibration curves for each pesticide were influenced by presence of green onion extracts in calibration solutions (variability of the slopes was 4–9%), because the ratios of peak area for native pesticide to those for internal standards were influenced by matrix. The spike-and-recovery test with green onion was also performed. The analytical values obtained by using matrix-free calibration solution were biased from the spiked concentration, whereas those obtained by using matrix-matched calibration solution were comparable to the spiked concentration. These results indicate that matrix-matched calibration solution should be used for accurate quantification of neonicotinoid pesticides in food by LC/MS using deuterated internal standards.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

A roadmap for the conservation of freshwater mussels in Europe

Europe has a long history of human pressure on freshwater ecosystems. As pressure continues to grow and new threats emerge, there is an urgent need for conservation of freshwater biodiversity and its ecosystem services. However, whilst some taxonomic groups, mainly vertebrates, have received a disproportionate amount of attention and funds, other groups remain largely off the public and scientific radar. Freshwater mussels (Bivalvia, Unionida) are an alarming example of this conservation bias and here we point out six conceptual areas that need immediate and long-term attention: knowledge, threats, socioeconomics, conservation, governance and education. The proposed roadmap aims to advance research, policy and education by identifying the most pressing priorities for the short- and long-term conservation of freshwater mussels across Europe.     

Life cycle of meats: an opportunity to abate the greenhouse gas emission from meat industry in Japan

The food industry is one of the world's largest industrial sectors, hence a large contributor of greenhouse gases (GHG) which cause global warming. This study evaluates the life cycle of various types of meat to determine if the GHG emission from the meat industry in Japan could be reduced if the population makes different dietary choices. It was confirmed that the GHG emission of beef was greater than that of pork or chicken. The GHG emission from meat in general also depends on the per capita caloric intake (if meat supplies the recommended animal protein or contributes to it at the present rate). In a healthy and balanced diet (9.2 MJ i.e., 2200 kcal in total, where either mixed meat or chicken or pork or beef contributes 2.2%), the GHG emission is estimated to be 0.28 or 0.17 or 0.15 or 0.77 kg CO? eq/person/day, respectively. A change in consumption patterns (from beef to chicken or pork) and the adoption of a healthy and balanced diet would help to abate about 2.5-54.0 million tons (CO? eq) produced by the meat industry each year in Japan.     

The simulation of long-range transport of ¹³⁷Cs from East Asia to Japan in 2002 and 2006

To evaluate the quantities of ¹³⁷Cs from past nuclear tests being transported to and deposited in Japan by naturally-occurring phenomena, the authors developed long-range transport models for ¹³⁷Cs considering Asian dust. The simulation using these models backed the observed recent increase of ¹³⁷Cs deposition along the coast of the Sea of Japan in early spring. For the sake of public safety, it is vital to ascertain whether an increase of radioactive deposition is caused by natural phenomena or a nuclear accident. The observations in recent years have suggested that dust and soil containing ¹³⁷Cs is transported from the regions around Inner Mongolia to Japan by the wind. In this paper, using observation data from the early spring of 2002 and 2006, the authors have found good agreement between the simulations and the measurements. The simulations reproduced the entrainment of ¹³⁷Cs and subsequent transport to Japan caused by strong winds associated with low pressure areas around the Inner Mongolian grasslands. The most likely cause of high-level ¹³⁷Cs deposition over northern Japan during March 2002 was ¹³⁷Cs associated with particles transported at low-altitude (1 km) and subjected to precipitation on the 22nd to 24th.     

Bioethanol production from enzymatically saccharified lawn clippings from a golf course

The utilization of bioethanol is being focused on as a fuel alternative to oil and or natural gas. Bioethanol production from cellulosic plant residues is one of the solutions proposed for the problems caused by usage of food crops that are also vital for human consumption, such as sugar cane and corn, as a source of bioethanol. However, to utilize these new sources for bioethanol production, conditions for saccharification in each different material have not been optimized. In this study, we reported some optimum conditions for the saccharification of Korean lawn grass (KL) and bent grass (BG) using acremonium cellulase and endoglucanase as saccharifying enzymes for ethanol fermentation. With respect to saccharification of KL and BG, 0.19 and 0.18 g of d-glucose per g-substrate at maximum were produced, respectively. Comminution with a ball mill was found to be effective in the saccharification of KL, while ball-milled BG showed no significant improvement in saccharification. Being incorporated with 99 % of d-glucose consumption, saccharified KL was incubated for 3 days with Saccharomyces cerevisiae and Zymomonas mobilis, respectively, and each mixture fermented to ethanol yielding approximately 100 % of theoretical values from d-glucose consumption, respectively.