Glycosylation of bisphenol A by freshwater microalgae

The endocrine disruptor bisphenol A (BPA, 4,4'-isopropylidenediphenol) is used to manufacture polycarbonate plastic and epoxy resin linings of food and beverage cans, and the residues from these products are then sometimes discharged into rivers and lakes in waste leachates. However, the fate of BPA in the environment has not yet been thoroughly elucidated. Considering the effect of BPA on aquatic organisms, it is important that we estimate the concentration of BPA and its metabolites in the aquatic environment, but there are few data on the metabolites of BPA. Here, we focused on freshwater microalgae as organisms that contribute to the biodegradation or biotransformation of BPA in aquatic environments. When we added BPA to cultures of eight species of freshwater microalgae, a reduction in the concentration of BPA in the culture medium was observed in all cultures. BPA was metabolized to BPA glycosides by Pseudokirchneriella subcapitata, Scenedesmus acutus, Scenedesmus quadricauda, and Coelastrum reticulatum, and these metabolites were then released into the culture medium. The metabolite from P. subcapitata, S. acutus, and C. reticulatum was identified by FAB-MS and (1)H-NMR as bisphenol A-mono-O-beta-d-glucopyranoside (BPAGlc), and another metabolite, from S. quadricauda, was identified as bisphenol A-mono-O-beta-d-galactopyranoside (BPAGal). These results demonstrate that freshwater microalgae that inhabit universal environments can metabolize BPA to its glycosides. Because BPA glycosides accumulate in plants and algae, and may be digested to BPA by beta-glycosidase in animal intestines, more attention should be given to levels of BPA glycosides in the environment to estimate the ecological impact of discharged BPA.     

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in the atmosphere and bulk deposition in Kyoto, Japan

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in atmosphere, bulk atmospheric deposition and soil in Kyoto, which is an urban city in Japan, were measured. Decabromodiphenyl ether (D(10)BDE, BDE-209) was detected in relatively high concentrations compared to other PBDE congeners in most samples. Similar results, in which D(10)BDE was predominantly detected, were reported in other studies in Japan. However, these homologue profiles differ from those of studies conducted in North America. The partitioning of semivolatile organic compounds between atmospheric gas phase and particulate-associated phase is an important factor in their environmental behavior. In this study, atmospheric particulate phase fraction (f(P)) of the brominated compounds increased with increasing bromine number, and f(P) was higher in samples collected in winter than in those collected in summer. Moreover, f(P) of PBDFs and MoBPXDFs was higher than that of PCDFs with the same halogen number. These results agree well with expectations from the vapor pressure of the brominated compounds and PCDD/Fs. Among the brominated compounds in the atmosphere, the level of MoBPXDD/Fs correlates positively with that of PCDD/Fs. This relationship has been previously observed in waste incineration samples. These results suggest that one of the sources of MoBPXDD/Fs in the atmosphere is incineration byproduct. The level of PBDD/Fs seems to correlate positively with that of PBDEs. This relationship suggest that the PBDD/Fs in the atmosphere relate to PBDEs, which is an impurity of PBDE products, or formed by the manufacture or combustion of plastics containing PBDEs.     

Ionic imbalance due to hydrogen carbonate from Asian dust

In an attempt to identify the ionic imbalance, hydrogen carbonate, HCO₃⁻ (bicarbonate), was determined together with the commonly determined nine major ions because the imbalance was frequently encountered in the chemical analysis of samples with high pHs. Titration method was applied for the determination of the samples with pH higher than 5.6. These samples amounted to 102 of the 1536 samples collected in Hokkaido, Northern Japan, from April 1998 to December 2002. Of the 102 samples, 74 (Group A) showed an acceptable ion balance without including HCO₃⁻. In the other 28 (Group B), however, inclusion of HCO₃⁻ successfully improved the ion balance. These results suggested that hydrogen carbonate was a potential candidate for explaining the imbalance. The hydrogen carbonate concentrations showed a strong correlation with the corresponding non-sea salt calcium (nss-Ca²⁺) concentrations, which implied that hydrogen carbonate was derived from calcium carbonate particles incorporated into falling raindrops or cloud droplets. For Group A, the relationship between hydrogen carbonate and the nss-calcium ion concentration was very similar to that for commonly suspended particles in Hokkaido. On the other hand, Group B exhibited a stronger but significantly different correlation. To the samples of Group B, a back-trajectory analysis was applied to demonstrate that the samples were associated with aerosol travelling from Northern China or Mongolia, which indicated that alkaline aerosol affected the chemistry. In consideration of these findings, the current standard of the ion balance should be critically reviewed for modification in regard to the contribution of hydrogen carbonate not only in source areas but also in receptor areas of alkaline aerosol.     

土壤中多环芳烃化合物的生物降解及监测

在实验室模拟条件下,研究芳香化合物菲污染土壤中的生物降解作用。结果表明,转基因工程菌对土壤中菲的生物降解有很好促进效果,在30d内约有50%的菲被降解。同时利用分子生物学技术对污染环境中转基因工程菌进行了追踪监测,发现添加菌的数量随时间的推移逐渐减少。     

Effect of silica sand on activation energy for diffusion of sodium ions in montmorillonite and silica sand mixture

The effect of silica sand on the diffusion of sodium ions in mixtures of montmorillonite and silica sand was studied by measuring the apparent diffusion coefficients, activation energies for diffusion, and the basal spacing of the mixed samples. These diffusion experiments suggest that the apparent diffusion coefficients of sodium ions in the mixed samples were almost the same as those of pure montmorillonite samples having the same partial dry densities of montmorillonite. The activation energy dependence for diffusion of sodium ions on the partial dry density was different between the mixed samples and the pure montmorillonite samples. The activation energy increased by adding silica sand at the partial dry density of 1.0 Mg m(-3), and decreased by adding silica sand at the partial dry densities higher than 1.2 Mg m(-3). A change in the XRD profile was observed after adding silica sand at the partial dry density of 1.6 Mg m(-3). Here, a three-water-layer hydrate state of montmorillonite was found in the mixed sample whereas only a two-water-layer hydrate state was observed in the pure montmorillonite sample. These experimental results suggest that silica sand changed the montmorillonite microstructure in the mixed samples, which then altered the sodium-ion diffusion process.     

Radium geochemistry in Na-Cl type groundwater in Niigata Prefecture, Japan

Radium isotopes in 23 Na-Cl type groundwater sampled mainly from deep wells in Niigata Prefecture, which is the site of the largest oil- and gas-fields in Japan, were measured along with U isotopes, chemical components and hydrogen and oxygen isotope ratios to elucidate the distribution and behavior of Ra in a brackish environment underground. Also analyzed were U and Th isotopes in 38 rock samples collected from outcrops at 17 locations. Ra-226 concentrations (8.86-1637 mBq kg⁻¹) of groundwater samples roughly correlated with total dissolved solid (TDS) concentrations and other alkaline earth contents. Their ²²⁸Ra/²²⁶Ra activity ratios (0.32-5.2) were similar to or higher than the ²³²Th/²³⁸U activity ratios (0.6-1.7) in the rocks. The most likely transport mechanism of Ra isotopes into groundwater was due to their α-recoil from the solid phase, probably from the water-rock interface where Th isotopes had accumulated, and adsorption/desorption reaction based on the increase in ²²⁶Ra contents with TDS.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

Inactivation of antineoplastics in clinical wastewater by electrolysis

Wastewater from clinical institutions contains a considerable amount of toxic substances. Among the toxic substances, antineoplastics may induce carcinogenesis, teratogenesis, and the emergence of mutant microorganisms in the environment. Although the incineration or chemical treatments of disposed antineoplastics are recommended, a high energy during incineration and a careful quality control during chemical treatment are required. In this study, we determined the conditions for the electrolytic treatment of an antineoplastic, epirubicin hydrochloride (EH), using two platinum electrodes with a constant current of 100 mA. We analyzed the cytotoxicity, mutagenicity and antibacterial activity of electrolyzed EH and compared them with those of unelectrolyzed EH. Nearly 100% cytotoxicity, mutagenicity and antibacterial activity were eliminated and HPLC did not detect an EH molecule, in the case of electrolysis for 6 h. We also examined the biological cytotoxicities of electrolyzed irinotecan hydrochloride, vincristine sulfate, mitomycin C, paclitaxel, methotrexate and cisplatin, and found that 72.1-99.999% toxicity was eliminated by electrolysis under the same conditions. The biological toxicity of a mixture of these drugs was determined to be decreased by approximately 99% by electrolysis under the same conditions.