Traffic-generated noise pollution: exposure of road users and populations in Metropolitan Kuwait

This study was carried out in metropolitan Kuwait with a sound level meter to assess peak hour and off-peak hour noise level. In local/collector streets, noise ranged between 56.0 to 79.2 dBA and 55.3 to 76.4 dBA; in arterial streets, 62.3 to 89.2 dBA and 59.6 to 78.9 dBA; and in freeways, 66.7 to 94.8 dBA and 64.9 to 89.1 dBA during peak and off-peak hour respectively. Values were higher than their prescribed standards which may pose a significant impact on quality of life. Findings of this research have shown that the level of traffic-generated noise pollution in Kuwait urban area is high enough to adversely affect the human health and well-being of its residents. Over 1,400 subjects responded to a randomly administered survey that assessed the physical health, personal well-being, and mental health. People residing in neighborhoods exposed to higher noise levels have significantly higher stress and noise annoyance levels and also adversely affected their sense of well-being. In the responder analysis, those people living in quiet neighborhoods had significantly higher mean scores in general health (35 points higher, p < 0.05), sense of vitality (30 points higher, p < 0.05), and mental health (20 points higher, p < 0.05) when compared to the other group. In addition, the component scores of stress and noise sensitivity for the participants living in quiet neighborhoods had significantly lower values (30 points lower and 59 points lower, respectively) than that of the participants living in noisy neighborhood. With the rapid expansion of the infrastructures in metropolitan Kuwait, it is virtually definite that traffic noise will shortly assume a dangerous dimension, and will be a ground of escalating fear for both the public and liable policy-makers. The quality of life in metropolitan Kuwait will certainly be negatively affected.     

Enhanced dechlorination of chlorobenzene by microwave-induced zero-valent iron: particle effects and activation energy

Organic compounds such as chlorobenzene cannot be effectively decomposed with currently available biological and chemical treatment methods. Preliminary studies show that nano-scale zero-valent iron particles irradiated by microwave is effective in decomposing chemically refractive organic compounds such as chlorobenzene. In this study, microwave is applied to enhance chlorobenzene removal using micron-scale iron particles and nano-scale zero-valent iron particles suspended in the chlorobenzene solution as the dielectric media. The results show that better chlorobenzene removal can be achieved when the chlorobenzene solution is irradiated with 250 W microwave for 150 s than without microwave irradiation. The microwave radiation increases iron reaction rate and surface activity, thus enhancing the chlorobenzene removal. The microwave-induced iron particles cause the chlorobenzene activation energy to drop 34.0% for micron-scale iron and 16.1% for nano-scale zero-valent iron. They can remove 13.6 times more chlorobenzene for micro iron, and 3.6 times more chlorobenzene for nano iron. We have demonstrated that the microwave-induced nano-scale iron particles are effective in treating toxic organic substances as demonstrated in this laboratory study.     

铜尾矿区9种优势植物体内重金属和氮磷含量研究

以杨山冲铜尾矿废弃地人工覆土上生长的9种优势植物为研究对象,探讨不同植物对尾矿基质中重金属和氮磷的吸收特性以及与基质理化性质之间的关联。土壤样品采集时沿基质垂直方向分为4层：A层（覆土层0~5 cm）、B层（覆土层5~20 cm）、C层（尾砂层20~25 cm）、D层（尾砂层25~40 cm）,植物样品采集时草本植物分地上和地下2部分、木本植物分根、茎和叶3部分采集。结果表明：随着9种植物生长,A层和B层基质理化性质得到明显的改善。主要表现在A层中w（总氮）、w（氨氮）、w（硝氮）、w（有效磷）和w（有机质）显著高于C、D层（P〈0.05）,B层中w（有效态Cu）、w（有效态Zn）显著低于A、C、D层（P〈0.05）。9种优势植物对Cu、Pb、Zn的吸收和积累能力具有明显差异性,其中草本植物以根系积累为主,木本植物以叶片积累为主。草本植物对尾矿基质表现出较强的适应性和耐性,其中毛叶荩草（Arthraxon prionodes）根系中Cu、Pb、Zn的富集量均最大,耐性表现最突出,是较为理想的铜尾矿基质的修复物种。另外,本研究还发现,9种植物体内氮磷质量分数也各不相同,其中木本植物叶中氮磷质量分数均大于根、茎。木本植物体内w（总氮）与w（总磷）、w（Cu）、w（Zn）相关性较好,草本植物体内w（Cu）、w（Pb）、w（Zn）之间相关性较好,表明彼此之间存在一定的促进作用。     

安全评价工作中的几点体会

本人在从事安全评价过程中有几点体会,想与同行进行交流和沟通,希望能够对我们所从事的安全评价工作有一个促进和提升,使每一个从事安全工作的人员真正能够为企业安全生产提供帮助,为安全监督管理部门监管提供技术支撑。也希望能够对刚刚从事安全评价工作的人员有所帮助。     

Validating an evidence-based, self-rated fall risk questionnaire (FRQ) for older adults

Background

Falls are a common, serious, and often unrecognized problem facing older adults. The objective of this study was to provide an initial clinical and statistical validation for a public health strategy of fall risk self-assessment by older adults using a Fall Risk Questionnaire (FRQ).

Methods

Adults age 65 + (n = 40) were recruited at a Los Angeles Veterans Affairs (VA) medical facility and at a local assisted living facility. Participants completed the FRQ self-assessment and results were compared to a “gold standard” of a clinical evaluation of risks using the American/British Geriatrics Society guidelines to assess independent predictors of falls: history of previous falls, fear of falling, gait/balance, muscle weakness, incontinence, sensation and proprioception, depression, vision, and medications. For the comparison, we used an iterative statistical approach, weighing items based on relative risk.

Results

There was strong agreement between the FRQ and clinical evaluation (kappa = .875, p < .0001). Individual item kappa values ranged from .305-.832. After dropping one FRQ item (vision risk) because of inadequate agreement with the clinical evaluation (kappa = .139, p = .321), the final FRQ had good concurrent validity.

Conclusions

The FRQ goes beyond existing screening tools in that it is based on both evidence and clinical acceptability and has been initially validated with clinical examination data. A larger validation with longitudinal follow-up should determine the actual strength of the FRQ in predicting future falls.     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

我国应关注ISO呼吸防护的标准化工作

本文介绍了国际标准化组织（ISO）正在开展的呼吸器标准化工作的情况,包括参与国家信息和工作分工情况,以及ISO呼吸器标准体系、产品分类、标准项目信息、产出、进展和进度,分析了ISO标准在未来对全球呼吸防护计数和产品市场发展的影响,并呼吁中国尽早采取主动行动参与其中,争取获得更多的话语权和掌握未来产品技术发展方向的主动权。     

3种抗生素对热带爪蟾胚胎发育的毒性影响

由抗生素在畜牧养殖业中的滥用造成的水环境污染问题及其对水生生物的毒害作用日益受到关注.用0.5～ 1.5 g/L的氯霉素(Chloramphenicol)、红霉素(Erythromycin)和0.01 ～ 0.5 g/L的四环素(Tetracycline)对热带爪蟾(Xenopus tropicalis)胚胎进行72 h暴露.结果表明,1.25 g/L和1.5 g/L的氯霉素使胚胎存活率分别下降了7％和14％,红霉素对胚胎存活无明显影响,0.5 g/L四环素导致胚胎全部死亡.1.5 g/L的氯霉素和红霉素使胚胎体长分别减少了7％和9％,0.25 g/L的四环素使胚胎体长减少了4％.3种抗生素能引起围心腔水肿、泄殖腔增大或拉长、肛门扩张和尾部弯曲等多种畸形现象,1.5g/L的氯霉素造成的总畸形率和围心腔水肿率分别为44％和34％;1.5 g/L的红霉素造成的总畸形率和泄殖腔增大率分别为22％和20％;0.25 g/L四环素造成的总畸形率和肛门扩张率分别为75％和59％.3种抗生素对热带爪蟾胚胎的发育毒性从大到小为四环素、氯霉素、红霉素.     

单兵用主动式听力保护技术研究现状分析

战场噪声是造成单兵听力损伤的重要原因,通常要求单兵处于大于85dBA的噪声环境中需佩戴听力保护装置。听力保护装置通常包括耳罩式和耳塞式。新型单兵用耳塞式听力保护装置具有听力保护、环境声音的监听、持续及脉冲噪声抑制、通信接入等多种功能。     

Forensic fingerprinting and source identification of the 2009 Sarnia (Ontario) oil spill

This paper presents a case study in which integrated forensic oil fingerprinting and data interpretation techniques were used to characterize the chemical compositions and determine the source of the 2009 Sarnia (Ontario) oil spill incident. The diagnostic fingerprinting techniques include determination of hydrocarbon groups and semi-quantitative product-type screening via gas chromatography (GC), analysis of oil-characteristic biomarkers and the extended suite of parent and alkylated PAH (polycyclic aromatic hydrocarbon) homologous series via gas chromatography-mass spectrometry (GC-MS), determination and comparison of a variety of diagnostic ratios of "source-specific marker" compounds, and determination of the weathering degree of the spilled oil, and whether the spilled oil hydrocarbons have been mixed with any other "background" chemicals (biogenic and/or pyrogenic hydrocarbons). The detailed chemical fingerprinting data and results reveal the following: (1) all four samples are mixtures of diesel and lubricating oil with varying percentages of diesel to lube oil. Both samples 1460 and 1462 are majority diesel-range oil mixed with a smaller portion of lube oil. Sample 1461 contains slightly less diesel-range oil. Sample 1463 is majority lubricating-range oil. (2) The diesel in the four diesel/lube oil mixture samples was most likely the same diesel and from the same source. (3) The spill sample 1460 and the suspected-source sample 1462 have nearly identical concentrations and distribution patterns of target analytes including TPHs, n-alkane, PAHs and biomarker compounds; and have nearly identical diagnostic ratios of target compounds as well. Furthermore, a perfect "positive match" correlation line (with all normalized ratio data points falling into the straight correlation line) is clearly demonstrated. It is concluded that the spill oil water sample 1460 (#1, from the water around the vessel enclosed by a boom) matches with the suspected source sample 1462 (#3, from the vessel engine room bilge pump). (4) From the n-alkane and PAH analysis, it appears that the oil in the spill sample 1460 is slightly more weathered in comparison with sample 1462. The minor differences in fingerprints of two samples were most likely caused by weathering effects. (5) Sample 1461 (#2, from the vessel engine room bilge) and sample 1463 (#4, from the vessel bilge waste collection tank) demonstrated significantly different fingerprints and diagnostic ratios of target compounds from that of spill sample 1460. This was caused most likely by percentages of diesel to lube oil in these two samples different from that in spill sample 1460.