The thermal hazard evaluation of 1,1-di (tert-butylperoxy) cyclohexane by DSC using non-isothermal and isothermal-kinetic simulations

1,1-Di (tert-butylperoxy) cyclohexane (DTBPH) has been widely employed in the chemical industry. Unfortunately, organic peroxides have been involved in many serious fires and explosions in manufacturing processes, storage, and transportation. This study investigated the thermokinetic parameters by isothermal kinetic and non-isothermal-kinetic simulation, using differential scanning calorimetry (DSC) tests. DSC was applied to assess the kinetic parameters, such as kinetic model, frequency factor (ln k₀), activation energy (E_a), reaction order, and heat of reaction (ΔH_d). Comparisons of non-isothermal and isothermal-kinetic model simulation led to a beneficial kinetic model of thermal decomposition to predict the thermal hazard of DTBPH. Simulations of a 0.5 L Dewar vessel and 25 kg barrel commercial package in liquid thermal explosion models were performed and compared to the results in the literature. From the results, the optimal conditions for use of DTBPH to avoid violent runaway reactions during the storage and transportation were determined. This study established the features of thermal decomposition that could be executed as a reduction of energy potential and storage conditions in view of loss prevention.     

Determination and Impact of Volatile Organics Emitted during Rush Hours in the Ambient Air around Gasoline Stations

Abstract

This study analyzes the volatile organic compounds (VOCs) in the ambient air around gasoline stations during rush hours and assesses their impact on human health. Results from this study clearly indicate that methyl tertiary butyl ether (MTBE), toluene, and isobutane are the major VOCs emitted from gasoline stations. Moreover, the concentrations of MTBE and toluene in the ambient air near gasoline stations are remarkably higher than those sampled on surrounding roads, revealing that these compounds are mainly released from gasoline stations. The concentration of VOCs near the gasoline stations without vapor recovery systems are ～7.3 times higher than those around the gasoline stations having the recovery systems. An impact on individual health and air quality because of gasoline station emissions was done using Integrated Risk Information System and Industrial Source Complex Short Term model.     

A study of assessment indicators for environmental sustainable development of science parks in Taiwan

This study adopted the ecological footprint calculation structure to calculate the ecological footprints of the three major science parks in Taiwan from 2008 to 2010. The result shows that the ecological footprints of the Hsinchu Science Park, the Central Taiwan Science Park, and the Southern Taiwan Science Park were about 3.964, 2.970, and 4.165 ha per capita. The ecological footprint (EF) of the Central Taiwan Science Park was the lowest, meaning that the influence of the daily operations in the Central Taiwan Science Park on the environment was rather low. Secondly, the population density was relatively high, and the EF was not the highest of the Hsinchu Science Park, meaning that, while consuming ecological resources, the environmental management done was effective. In addition, the population density in Southern Taiwan Science Park is 82.8 units, lower than that of Hsinchu Science Park, but its ecological footprint per capita is 0.201 units, higher than Hsinchu, implying its indicator management has space for improvement. According to the analysis result above, in the science parks, the percentages of high-energy-consuming industries were rather high. It was necessary to encourage development of green industries with low energy consumption and low pollution through industry transformation.     

Field depuration and biotransformation of paralytic shellfish toxins in scallop<Emphasis Type="Italic"> Chlamys nobilis</Emphasis> and green-lipped mussel<Emphasis Type="Italic"> Perna viridis</Emphasis>

Under laboratory conditions, the scallop Chlamys nobilis and the mussel Perna viridis were exposed to N-sulfocarbamoyl toxins (C2 toxin), a paralytic shellfish toxin (PST), by feeding a local toxic strain of the dinoflagellate Alexandrium tamarense (ATDP) that produced C2 toxin exclusively. The bivalves were subsequently depurated in the field, and their depuration kinetics, biotransformation and toxin distribution were quantified. Depuration was characterized by a rapid loss within the first day, followed by a secondary slower loss of toxins. In the fast depuration phase, scallops detoxified PSTs more quickly than the mussels (depuration rate constants for scallops and mussels were 1.16 day^–1 and 0.87 day^–1, respectively). In contrast, the mussels detoxified PSTs more quickly than the scallops in the slow depuration phase, and the calculated depuration rate constants (mean+SE) from day 2 to day 13 were 0.063+0.009 day^–1 and 0.040+0.019 day^–1 for mussels and scallops, respectively. The differences in the appearances of gonyautoxins, GTX2 and GTX3, and their decarbamoyl derivatives, dcGTX2, dcGTX3 and GTX5, which are all derivatives of C2 toxin, indicated active and species-specific biotransformation of the algal toxins in the two bivalves. In both species of bivalves, the non-viscera tissue contained fewer toxins and lower concentrations than the viscera-containing tissue compartment. In scallops, very little toxin was distributed in the adductor muscle. In mussels, most of the PSTs were found in the digestive gland with significant transport of toxins into the digestive gland from other tissues during the course of depuration. The toxin profiles of scallops and mussels differed from each other and from that of the toxic algae fed. A significant fraction of GTX5 was detected in the mussels but not in the scallops. Our study demonstrates a species specificity in the depuration kinetics, biotransformation and tissue distribution of PSTs among different bivalves.Communicated by T. Ikeda, Hakodate     

XANES study of Cr sorbed by a kitchen waste compost from water

A kitchen waste compost was used to sorb Cr for various times from water containing either Cr(NO3)3 or CrO3 in different concentrations. Scanning electron microscopy (SEM) results show that the composts have been partially oxidized by Cr(VI) during the sorption experiments. X-ray absorption near edge structure (XANES) simulation suggests that about 54.1-61.0% Cr sorbed on the compost is in form of organic Cr(III) through ionic exchange process with the rest being existent as Cr(NO3)3 in the Cr(III) sorption case; no Cr(OH)3 is observed or expected because the solution pH after sorption experiments is or= 5.94. Moreover, organic Cr(III) represents about 51.7-69.0% of the total sorbed Cr, and the rest (6.1-28.5%) is Cr(VI).     

Bioretention column studies of phosphorus removal from urban stormwater runoff.

This study investigated the effectiveness of bioretention as a stormwater management practice using repetitive bioretention columns for phosphorus removal. Bioretention media, with a higher short-term phosphorus sorption capacity, retained more phosphorus from infiltrating runoff after 3 mg/L phosphorus loading. A surface mulch layer prevented clogging after repetitive total suspended solids input. Evidence suggests that long-term phosphorus reactions will regenerate active short-term phosphorus adsorption sites. A high hydraulic conductivity media overlaying one with low hydraulic conductivity resulted in a higher runoff infiltration rate, from 0.51 to 0.16 cm/min at a fixed 15-cm head, and was more efficient in phosphorus removal (85% mass removal) than a profile with low conductivity media over high (63% mass removal). Media extractions suggest that most of the retained phosphorus in the media layers is available for vegetative uptake and that environmental risk thresholds were not exceeded.     

Evaluation of Locations for Small Wind Turbines in Costal Urban Areas Based on a Wind Energy Potential Map

The purpose of the study was to evaluate potential locations for the installation of small wind turbines in urban areas. Four study sites in An-Ping, Tainan were chosen for measurement in this empirical study. The measurement data were used to verify the computational fluid dynamics (CFD) model. The weather information was gathered in order to understand the overall wind environment in the studied area. CFD software was used to simulate the wind environment in the study area from 16 directions. The distribution of wind environment was first presented, and then the distribution of exceedance probability in each grid, which was based on an exceedance probability assessment, was obtained. In addition to the installation heights of the turbines, the influence of surrounding buildings was taken into consideration. Finally, a wind energy potential map indicating the potential regions and non-potential regions for installing small wind turbines was illustrated by the ArcGIS system. A wind energy potential map, superimposed with locations of buildings of different floor heights, was used to evaluate the possible sites for the installment of small wind turbines at heights of 10, 20, and 30 m. The results proved that installing micro wind turbines in open spaces and on the roofs of three-, four-, and five-story buildings at a height of 20 m is relatively beneficial for coastal urban areas.     

Exposure of arc-furnace-plant workers to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs)

This study aimed to evaluate serum polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) levels in electric-arc-furnace workers according to their corresponding occupational exposure. In addition, the ambient PCDD/Fs of the work environment were measured to provide additional support for the exposure and accumulation inside the electric arc furnace. The ambient PCDD/F concentrations inside the electric arc furnace were 1.557-1.917 pg-TEQ/Nm(3), 5-24 folds higher than those outside (0.080-0.385 pg-TEQ/N m(3)). In addition, higher average serum levels were measured in the workers with high occupational dioxin exposure (24.0 pg WHO-TEQ/g lipid) than in those with lower occupational dioxin exposure (13.8 pg WHO-TEQ/g lipid). Higher PCDFs/PCDDs ratios were found in serum samples from high-exposure groups than in low-exposure groups. The higher ratio of PCDFs/PCDDs was also found in ambient samples consistent with other metallurgical processes reported previously. Our results suggest that PCDD/Fs exposure exits in the smelting process of electric arc furnace, and the occupational hygiene should be taken more seriously concern in that workplace.     

Relationship between carbonaceous materials and polychlorinated biphenyls (PCBs) in the sediments of the Danshui River and adjacent coastal areas, Taiwan

Persistent organic pollutants, POPs (e.g., polychlorinated biphenyls) can seriously and deleteriously affect environmental quality and human health. These organic pollutants are exhibiting high affinities to solid phases and thus, quickly end up in sediments. To better understand the role of carbonaceous materials in the transport and distributions of POPs in terrestrial and near-shore environments, concentrations of PCBs and carbonaceous materials (including total organic carbon, black carbon and total carbohydrates), were determined in surface sediments of the Danshui River and nearby coastal areas, Taiwan. Total concentrations of PCBs in the sediments ranged from non-detectable to 83.9 ngg(-1), dry weight, with the maximum value detected near the discharge point of the marine outfall from the Pali Sewage Treatment Plant. These results suggest that the sewage treatment plant has discharged PCBs in the past and the concentrations are still high due to their persistence; alternatively, PCBs are still being discharged in the estuarine and near-shore environment of the Danshui River. Organic carbon and black carbon concentrations correlated well with those of total PCBs in the sediments, suggesting that both organic carbon and black carbon significantly affect the distribution of trace organic pollutants through either post-depositional adsorption, or by co-transport of similar source materials. The field results demonstrate that black carbon and plays an important role in the general distribution of PCBs, while concentrations of some specific PCBs are affected by both black carbon and organic carbon concentrations.