First detection of enteric adenoviruses genotype 41 in recreation spring areas of Taiwan

Environmental Science and Pollution Research - Human adenoviruses (HAdVs) are DNA viruses found in recreational water, such as water parks and swimming pools. Human adenovirus 41 (HAdV-41) is the...     

Advanced superhydrophobic electroactive fluorinated polyimide and its application in anticorrosion coating

A novel superhydrophobicelectroactive fluorinated polyimide (HEFPI) was first synthesized from aniline trimer and 4,4′-(Hexafluoroisopropylidene) diphthalic anhydride. The HEFPI could be fabricated as superhydrophobicfilm by replicated the surface of the Xanthosomasagittifolium leaves. The water contact angle of HEFPI film reaches as high as 157 ° and the superhydrophobic property of HEFPI could coat on cold-rolled steel (CRS) to prevent the metal corrosion. Electroactivity of EFPI was evaluated by performing electrochemical cyclic voltammetry study. Besides, redox catalytic capabilities of aniline trimer units existed in HEFPI main chain may induce the formation of passive metal oxide layers on the CRS electrode. The synergistic effects (hydrophobic property and passive metal oxide layers) make the HEFPI coating has great potential for advanced anticorrosion material.     

Human PCDD/PCDF levels near a pentachlorophenol contamination site in Tainan, Taiwan

A pentachlorophenol (PCP) manufacturing plant in southern Taiwan discontinued production in 1989. The site of the abandoned plant was heavily contaminated by PCDD/PCDFs, impurities formed in the PCP production process. Serum samples collected from 27 residents living near the deserted plant were evaluated to determine whether this contamination had associated serum levels of PCDD/PCDFs in local residents. The average level of 17 tested congeners ranged from 556 to 5240 pg/g lipid (mean, 1670 pg/g lipid). The corresponding 2,3,7,8-TCDD toxicity equivalent quotient values calculated by international toxicity equivalent factors (I-TEFs) and those recommended by WHO (WHO-TEFs) were 47.2 pg I-TEQ/g lipid and 53.4 pg WHO-TEQ/g lipid, respectively. Levels in other parts of Taiwan typically range from 15 to 20 pg WHO-TEQ/g lipid; therefore, it is likely that the heavily contaminated plant site caused these unusually high serum levels. The average PCDD/PCDF levels of 29 fish-tissue and nine soil samples collected from the sea reservoir surrounding the abandoned PCP plant were also abnormally high: 8630 pg/g lipid (985 pg WHO-TEQ/g lipid) and 606000 pg/g-sample (922 pg WHO-TEQ/g-sample), respectively. Factor analysis indicated that the congener pattern of human serum samples collected from residents living near the abandoned PCP plant different from samples collected from other areas in Taiwan without known PCDD/PCDF pollution. Similar results were observed for the fish tissue and soil samples. The current study may have discovered a "hot spot" for elevated dioxin human exposure in Taiwan. The preliminary finding has raised a public health concern in the inspected area and requires further investigations to clarify the nature of the contamination and potential impact on the local environment and human health.     

A field assessment of floor slipperiness in a fish market in Taiwan

A field assessment of floor slipperiness in 10 fish stands in a fish market in Taiwan was conducted using both friction measurements and subjective ratings. The friction measurements were conducted using the Portable Skid Resistance Tester (PSRT). The subjective ratings of floor slipperiness of both the workers and the customers were collected. The friction measurement results showed that the sink areas had both the lowest friction values and subjective ratings. The overall friction measurement results and the subjective ratings were in fair agreement (r = 0.46 and ρ = 0.49). The customers perceived the walkways as somewhere between “very slippery” to “somewhat slippery” and the picking-up areas as “very slippery.” These were different from the perceptions of the workers where they perceived both areas as “somewhat slippery.”     

Anhydrosugar and sugar alcohol organic markers associated with carboxylic acids in particulate matter from incense burning

Aerosol from the burning two types of sandalwood-based incense, Hsing Shan and Lao Shan, was analyzed to characterize the chemical profile of total particulate matter emitted. The total particulate matter (PM) mass emission factors were 46.3 ± 2.68 mg g^?1 of Hsing Shan incense and 43.7 ± 1.08 mg g^?1 of Lao Shan incense. Chemical analysis of emissions from the two types of incense revealed that of the 25 components in four groups characterized, anhydrosugars formed the major group, at 46.7–52.2% w/w of the identified particulate and 1078.3–1169.8 μg g^?1 of incense, followed by inorganic salts at 30.4–31.8% w/w of identified particulate and 681.6–734.0 μg g^?1 of incense, carboxylic acids at 12.0–17.1% w/w of the identified particulate and 268.6–392.8 μg g^?1 of incense, and sugar alcohols at 4.44–5.38% w/w of the identified particulate and 102.3–120.6 μg g^?1 of incense. More anhydrosugars and sugar alcohols were emitted from Lao Shan incense than from Hsing Shan incense whereas more carboxylic acids and organic salts were emitted from Hsing Shan than from Lao Shan. These differences were due to structural and functional differences in the young sandalwood used to make Hsing Shan and the aged sandalwood used to make Lao Shan. The anhydrosugar levoglucosan, used as a marker of biomass burning, was always the most abundant species in emitted PM for both incenses (Lao Shan 21.7 mg g^?1 of PM and Hsing Shan 18.7 mg g^?1). K⁺ and Cl^? were the second most abundant components (K⁺ and Cl^? were summed), accounting for 10.6 mg g^?1 of Hsing Shan PM and 9.85 mg g^?1 of Lao Shan PM. The most abundant carboxylic acids in the emissions were formic, acetic, succinic, glutaric and phthalic acid. The latter is a fragrance ingredient and a potential health hazard and was twice as prevalent in Lao Shan emissions. Xylitol was the most prevalent of the sugar alcohols at 35.7–36.6% w/w of total identified sugar alcohols. These abundant species are potential markers for incense burning. K⁺, levoglucosan, mannosan and xylitol are already reported in discriminator ratios for wood burning and it is proposed here that these can and should also apply to incense burning. The calculated discriminator ratios for two types of incense burning reported here are 0.229–0.288 for K/Levo, 12.5–13.5 for Levo/Manno, and 21.5–23.7 for the novel discriminator ratio Levo/Xylitol.     

Effects of various ions on the dechlorination kinetics of hexachlorobenzene by nanoscale zero-valent iron

The effect of several anions and cations normally co-present in soil and groundwater contamination sites on the degradation kinetics and removal efficiency of hexachlorobenzene (HCB) by nanoscale zero-valent iron (NZVI) particles was examined. The degradation kinetics was not influenced by the HCO(3)(-), Mg(2+), and Na(+) ions. It was enhanced in the presence of the Cl(-) and SO(4)(2-) ions due to their corrosion promotion. The NO(3)(-) competes with HCB so it inhibits the degradation reaction. The Fe(2+) ions would inhibit the degradation reaction due to passivation layer formed, while it was enhanced in the presence of Cu(2+) ions resulted from the reduced form of copper on NZVI surfaces. These observations lead to a better understanding of HCB dechlorination with NZVI particles and can facilitate the remediation design and prediction of treatment efficiency of HCB at remediation sites.     

Partitioning of arsenic in soil-crop systems irrigated using groundwater: a case study of rice paddy soils in southwestern Taiwan

The accumulation of As in rice due to groundwater irrigation in paddy fields represents a serious health hazard in South and Southeast Asia. In Taiwan, the fate of As in long-term irrigated paddy fields is poorly understood. Groundwater, surface soil, and rice samples were collected from a paddy field that was irrigated with As-containing groundwater in southwestern Taiwan. The purpose of this study is to elucidate the source and sink of As in the paddy field by comparing the As fractions in the soils that were obtained by a sequential extraction procedure (SEP) with the As uptake of rice. The risks associated with eating rice from the field can thus be better understood. The concentration of As in groundwater varied with time throughout the growing seasons of rice, but always exceeded the permitted maximum (10 μg L⁻¹) for drinking water by the WHO. The As concentration increased with the concentration of Fe in the groundwater, supporting the claim that a large amount of As was concentrated in the Fe flocs collected from the internal wall of the groundwater pump. The results of the SEP revealed that As bound with amorphous and crystalline hydrous oxides exhibited high availability in the soils. The root of rice accumulated the largest amount of As, followed by the straw, husk, and grain. Although the As concentration in the rice grain was less than 1.0 mg kg⁻¹, the estimated intake level was close to the maximum tolerable daily intake of As, as specified by the WHO.     

Ozone-enhanced catalytic oxidation of monochlorobenzene over iron oxide catalysts

In this study, we examined the experimental catalytic oxidation of gaseous monochlorobenzene (MCBz) with O₃ over Fe₂O₃ in a packed bed reactor to investigate the feasibility of economical low temperature decomposition at a high space velocity (SV). We investigated the effects of several reaction parameters (temperature, O₃ concentration, and SV) on the MCBz oxidation. At 150 °C, the conversion of MCBz over Fe₂O₃ in the absence of O₃ was only 3%; it increased to 91% over Fe₂O₃ in the presence of 1200 ppm of O₃ at a high SV of 83 s⁻¹. A long-term operation study revealed that the conversion of MCBz was stable for more than 96 h. In the steady state, the carbon and chlorine balances were 88% and 86%, respectively. Applying a Langmuir-Hinshelwood kinetic model, we estimated an activation energy of 16.7 kJ mol⁻¹ for MCBz oxidation over Fe₂O₃ in the presence of O₃.     

Impact of selected solution factors on arsenate and arsenite removal by nanoiron particles

Introduction  

The nano-scale zero-valent iron (NZVI) was used for the removal of arsenite (As(III)) and arsenate (As(V)) in aqueous solution. Batch experiments were conducted to investigate the effects of initial pH, initial arsenic concentration, dissolved oxygen (DO), and ratio of As(III)/As(V) on arsenic removal.     

Preparation and Application of PEG/PVP Copolymers

In this study, we produced a series of environmentally friendly multifunctional additives by polymerization of biodegradable polyethylene glycol (PEG) and N-Vinyl-2-pyrrolidone in different proportions. The copolymer molecular structure was confirmed by Fourier transform infrared spectroscopy, and the impact of the copolymers on dye absorption and dye interaction was investigated. The results showed that the series of copolymers produced displayed enhanced dye decolorization with increasing copolymer dose and time. Additionally, the PEG/polyvinylpyrrolidone (PVP) copolymers and dye molecules interacted; addition of copolymer enabled shifts of the dye λ_max toward shorter wavelengths and decreased the UV absorbance. The addition of copolymers reduced the overall Zeta potential of the dye and increased the particle sizes, facilitating dye decolorization. In particular, the dye decolorization effect was the best when the PEG/PVP molar ratio was 8:1.