Analytical methods for microplastics in the environment: a review

Environmental Chemistry Letters - Microplastic pollution is a recently discovered threat to ecosystems requiring the development of new analytical methods. Here, we review classical and advanced...     

The role of technology innovation and people’s connectivity in testing environmental Kuznets curve and pollution heaven hypotheses across the Belt and Road host countries: new evidence from Method of Moments Quantile Regression

Environmental Science and Pollution Research - The Belt and Road Initiative (BRI) is closely linked to the ecological sustainability of the infrastructure ventures that intrinsically include the...     

Morphology and composition of particles emitted from conventional and alternative fuel vehicles

Size, morphology, and composition of airborne particles strongly affect human health and visibility, precipitation, and the kinetic characteristics of particles. In this study, the morphology and chemical composition of particles emitted from conventional (diesel and gasoline) and alternative (CNG and methanol) fuel vehicles were characterized through scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The SEM images revealed that the size of primary particles (without agglomeration) was approximately 10 nm in the exhaust from all the tested vehicles. The particles emitted from gasoline vehicle (GV), CNG vehicle (CNGV), and methanol vehicle (MV) had the same median diameter, 62 nm, which was smaller than those from heavy diesel vehicle (HDV) and light diesel vehicle (LDV). Soot was observed in the HDV, LDV, and GV samples but not in the CNGV and MV. The fractal dimension, which was used to quantify the degree of irregularity of soot, was 1.752 ± 0.014, 1.789 ± 0.076, and 1.769 ± 0.006 in the exhaust from HDV, LDV, and GV samples, respectively. The particles discharged by all tested vehicles contained the elements C, O, Fe, and Na. The main element in the samples of HDV, LDV, and GV was C, while O was the main element in the samples of alternative fuel vehicles. The profiles of minor elements were more complex in the emissions of alternative fuel vehicles than those in the emissions of conventional fuel vehicles. The results improved our understanding of the morphology and elemental composition of particles emitted from vehicles powered by diesel, gasoline, CNG, and methanol.

     

Microplastic pollution in freshwater systems in Southeast Asia: contamination levels,sources, and ecological impacts

Environmental Science and Pollution Research - Plastics are synthetic polymers known for their outstanding durability and versatility, and have replaced traditional materials in many applications....     

Occurrence,source apportionment,and carcinogenic risk assessment of polycyclic aromatic hydrocarbons in urban road dusts in Shanghai

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs), as a class of important environmental pollutants, have received considerable concern due to their widespread...     

半固态培养条件下烟曲霉去除土壤中镉

选用了1株高耐镉(Cd)的烟曲霉,提出了利用烟曲霉在半固态培养体系表面生长并去除Cd的方法,研究了菌体对不同模拟Cd污染水平土壤中Cd的去除效果,测定了菌体吸附和富集Cd的变化.结果表明,烟曲霉在半固态培养体系中能够实现一定的Cd去除效果,Cd含量为10 mg·kg~(-1)时,对土壤Cd的综合去除率可达31%.同时通过研究不同Cd含量下烟曲霉干重和体系pH随时间变化情况,发现随着培养时间和Cd含量的增加,烟曲霉干重逐渐下降,最大下降幅度可达64%,pH为5.6~6.0时去除效果较好.培养过程中土壤Cd形态变化表明,烟曲霉在该体系下主要去除土壤中弱酸溶态和可还原态的Cd,可氧化态Cd含量在培养前后基本保持不变.这种方法的提出为微生物去除土壤重金属污染提供了新的思路.     

常规施肥条件下农田不同途径氮素损失的原位研究:以长江中下游地区夏玉米季为例

为了解农田常规施肥条件下的不同途径氮素损失特征,本文通过田间原位试验同步研究了长江中下游地区夏玉米生长季氮肥施用后的农田N2O排放、NH3挥发、氮渗漏和地表径流的变化.结果表明,在复合肥为基肥,尿素为追肥,基追肥氮素水平均为150 kg·hm-2的条件下,整个玉米生长季N2O排放系数为3.3%,NH3挥发损失率为10.2%,氮渗漏和地表径流损失率分别为11.2%和5.1%.此外,基肥施用以氮素渗漏损失为主,而追肥氮素损失以氨挥发和渗漏为主,表明不同途径化肥氮素损失主要受氮肥品种影响,玉米季追肥可改用低氨挥发氮肥品种以减少氮素损失.     

基于车载测试的重型柴油车尾气典型烷烃排放特征

本文采用车载排放测试系统对11辆国Ⅰ~国Ⅳ标准重型柴油车进行实际道路测试,利用GC-MS对样品中典型烷烃进行定量分析,解析重型柴油车尾气典型烷烃排放特征及规律.结果表明,排放标准对重型柴油车尾气中正构烷烃、藿烷类有机物排放有显著影响,总体呈现随排放标准的加严而降低的趋势,相比于国Ⅰ测试车辆,国Ⅳ测试车辆正构烷烃、17α(H),21β(H)-C30藿烷(C30-藿烷)、22S-和22R-17α(H),21β(H)-C31升藿烷(22S-C31升藿烷;22R-C31升藿烷)总排放因子分别降低了72.23%,64.95%,70.78%和74.68%.气相正构烷烃呈双峰前锋型,以C17~C18为主峰碳,固相呈单峰前锋型,以C18~C21为主峰碳.藿烷类有机物其22S-C31升藿烷/(22S-C31升藿烷+22R-C31升藿烷)的比值在0.46~0.56之间,平均值为0.50,符合石油中藿烷的分布特征.正构烷烃总排放因子与17α(H),21β(H)-C30藿烷总排放因子呈现出一定的线性关系,其R~2为0.926 8.此外,行驶工况对测试车辆正构烷烃及藿烷类有机物排放有较大影响,非高速工况下排放因子是高速工况的1.69~2.42倍.     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

北京市郊区夏季臭氧重污染特征及生成效率

为研究北京郊区夏季O₃(臭氧)重污染过程特征及O₃生成的光化学敏感性,基于2016年夏季在北京郊区开展的针对O₃及其相关污染物的强化观测试验(7月23日—8月31日,共计40 d),分析了观测期间O₃浓度[以φ(O₃)计]变化特征、O₃重污染过程主控因素与O₃敏感性化学特征.结果表明:观测期间φ(O₃)超标时有发生,最大小时φ(O₃)为151.1×10-9,其中有15 d的φ(O₃)最大8 h滑动平均值(O₃-max-8h)超过了GB 3095—2012《环境空气质量标准》二级标准限值,占观测天数的37.5%;不同O₃重污染过程成因有所不同,城市烟羽传输的污染物对郊区O₃重污染过程影响显著(观测期间臭氧重污染过程:过程1,7月27—29日;过程3,8月9—11日;过程4,8月16日;过程5,8月21—24日),区域光化学污染对郊区O₃重污染过程也有贡献(观测期间O₃重污染过程2:8月4—6日);结合后向气流轨迹进一步辅助说明了不同重污染过程中O₃的来源不同.研究还发现,观测区域存在反“周末效应”现象,说明观测区域周末受人为影响较为明显;基于观测数据计算的OPE(O₃生成效率)分析了O₃光化学敏感性表明,在有OPE值的22 d内NO_x控制区和VOCs控制区出现的概率(41%)相等,即观测区域O₃对NO_x和VOCs均敏感;此外还发现,在O₃重污染过程中光化学敏感性会随其反应进程发生改变,由NO_x控制区逐渐转变为VOCs控制区.