Effect of humic substances on the precipitation of calcium phosphate

For phosphorus （P） recovery from wastewater, the effect of humic substances （HS） on the precipitation of calcium phosphate was studied. Batch experiments of calcium phosphate precipitation were undertaken with synthetic water that contained 20 mg/L phosphate （as P） and 20 mg/L HS （as dissolved organic carbon, DOC） at a constant pH value in the range of 8.0-10.0. The concentration variations of phosphate, calcium （Ca） and HS were measured in the precipitation process; the crystalline state and compositions of the precipitates were analysed by powder X-ray diffraction （XRD） and chemical methods, respectively. It showed that at solution pH 8.0, the precipitation rate and removal efficiency of phosphate were greatly reduced by HS, but at solution pH ≥9.0, the effect of HS was very small. The Ca consumption for the precipitation of phosphate increased when HS was added; HS was also removed from solution with the precipitation of calcium phosphate. At solution pH 8.0 and HS concentrations ≤3.5 mg/L, and at pH ≥ 9.0 and HS concentrations ≤ 10 mg/L, the final precipitates were proved to be hydroxyapatite （HAP） by XRD. The increases of solution pH value and initial Ca/P ratio helped reduce the influence of HS on the precipitation of phosphate.     

Changes in the Distribution of Broadleaf Tree Species in the Central Part of the Southern Urals since the 1970s

Russian Journal of Ecology - Changes in the distribution of broadleaf tree species—Tilia cordata Mill., Quercus robur L., Acer platanoides L., and Ulmus glabra Huds.—in the central part...     

Dynamics of Tree and Shrub Vegetation in the Eastern Sayan Mountain Tundra

Russian Journal of Ecology - Climate change entails shifts in the ranges of woody plants along both latitudinal and altitudinal gradients in the boreal forest biome. In this study,...     

Backwater Confluences of the Ohio River: Organic and Inorganic Fingerprints Explain Sediment Dynamics in Wetlands and Marinas

In the Ohio River (OR), backwater confluence sedimentation dynamics are understudied, however, these river features are expected to be influential on the system’s ecological and economic function when integrated along the river’s length. In the following paper, we test the efficacy of organic and inorganic tracers for sediment fingerprinting in backwater confluences; we use fingerprinting results to evidence sediment dynamics controlling deposition patterns in confluences used for wetland and marina functions; and we quantify the spatial extent of tributary drainages with wetland and marina features in OR confluences. Both organic and inorganic tracers statistically differentiate sediment from stream and river end‐members. Carbon and nitrogen stable isotopes produce greater uncertainty in fingerprinting results than inorganic elemental tracers. Uncertainty analysis of the nonconservative tracer term in the organic matter fingerprinting application estimates an apparent enrichment of the carbon stable isotopes during instream residence, and the nonconservativeness is quantified with a statistical approach unique to the fingerprinting literature. Wetland and marina features in OR confluences impact 42% and 11% of tributary drainage areas, respectively. Sediment dynamics show wetland and marina confluences experience deposition from river backwaters with longitudinally linear and nonlinear patterns, respectively, from sediment sources.     

Protective effects of thymoquinone against acrylamide-induced liver,kidney and brain oxidative damage in rats

Environmental Science and Pollution Research - Acrylamide (AA), an industrial monomer, may cause multi-organ toxicity through induction of oxidative stress and inflammation. The antioxidant...     

超高效液相色谱法测定土壤中微量阿特拉津

采用超高效液相色谱仪,建立了土壤中微量阿特拉津的快速检测方法.研究结果表明:采用反相C18色谱柱,以甲醇/水(70:30,v/v)为流动相,流速为0.2 ml/min,柱温为30℃,检测波长为220 nm条件下,在12.5～1000μg/L质量浓度范围内线性关系良好(r=0.9999),检出限0.18×10-3 mg/...     

Preparation of 2-mercaptobenzothiazole-derivatized mesoporous silica and removal of Hg(ii) from aqueous solution

Mesoporous silicas (SBA-15 and MCM-41) have been functionalized by two different methods. Using the heterogeneous route the silylating agent, 3-chloropropyltriethoxysilane, was initially immobilized onto the mesoporous silica surface to give the chlorinated mesoporous silica Cl-SBA-15 or Cl-MCM-41. In a second reaction a multifunctionalized N,S donor compound (2-mercaptobenzothiazol) was incorporated to obtain the functionalized silicas denoted as MBT-SBA-15-Het and MBT-MCM-41-Het. Using the homogeneous route, the functionalization was achieved via the one step reaction of the mesoporous silica with an organic ligand containing the chelating functions, to give the modified mesoporous silicas denoted as MBT-SBA-15-Hom or MBT-MCM-41-Hom. The functionalized mesoporous silicas were employed as adsorbents for the regeneration of aqueous solutions at pH 6 contaminated with Hg(ii) at room temperature. Results obtained indicate that mercury adsorption was higher in the mesoporus silicas prepared by the homogeneous method, and the maximum adsorption value (0.24 +/- 0.02 mmol Hg(ii) g(-1)) was obtained for MBT-SBA-15-Hom. The chemically stability in acid medium of the functionalized silicas, possibility its regeneration washing with concentrate HCl, resulting in the reuse of the adsorbent material for several cycles.     

Ultrafine particles at workplaces of a primary aluminium smelter

The number concentration and size distribution of ultrafine particles in a S?derberg and a prebake potroom of an aluminium primary smelter have been measured using a scanning mobility particle spectrometer. The particle morphology was studied by transmission electron microscopy (TEM). The study shows the existence of elevated number concentrations of ultrafine particles in both potrooms. The main source of these particles is likely to be the process of anode changing. The ultrafine particles were measured directly at the source but could also be identified as episodes of high number concentrations in the general background air. Unlike the larger particles belonging to the 50-100 nm mode, the nanoparticle mode could not be detected in the TEM indicating that they may not be stable under the applied sampling conditions and/or the high vacuum in the instrument.     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

An Analogy on Assessment of Urban Air Pollution in Turkey Over the Turn of the Millennium (1992–2001)

Rapid industrialization and urbanization in Turkey, especially over the last twenty five years, has provided better living standards to its residents, but it also caused a decrease in environmental quality. In late 1970's, air quality monitoring activities were started in some major cities by individual researchers in Turkey. It was just around the 1990's that a countrywide program on continuous air pollution monitoring in major province centers and selected large towns was launched. The impact of air pollution on people depend on various factors, such as existence and magnitude of coal powered energy generation plants, type of urban heating and their efficiency, and the numbers and specifications of vehicles. In this study, current Turkish urban air quality over the turn of the Millennium (1992–2001) is studied in the light of the country's worst cities in terms of outdoor air quality, the number of upper respiratory diseases, sinusitis, bronchitis, and pneumonia cases in these provinces reported by the state medical treatment facilities in 2001. The population that is under outdoor urban air pollution hazard was computed. A comparative analysis between the provinces that use natural gas and others that use fossil fuels was also completed in order to project monetary gains if the studied provinces will transform their indoor heating and industrial operations to be run by natural gas or other cleaner energy sources. If natural gas use in air polluted urban centers could be realized in the near future, approximately 212 to 350 million US dollars per annum could to be saved just by reducing health related problems caused by outdoor air pollution.