Treatment and desalination of domestic wastewater for water reuse in a four-chamber microbial desalination cell

Environmental Science and Pollution Research - Microbial desalination cells (MDCs) have been studied for contaminant removal from wastewater and salinity reduction in saline water. However, in an...     

Leaching behaviour of hazardous demolition waste

Demolition wastes are generally disposed of in unlined landfills for inert waste. However, demolition wastes are not just inert wastes. Indeed, a small fraction of demolition waste contains components that are hazardous to human health and the environment, e.g., lead-based paint, mercury-contained in fluorescent lamps, treated wood, and asbestos. The objective of this study is to evaluate the release potential of pollutants contained in these hazardous components when they are mixed with inert wastes in unlined landfills. After identification of the different building products which can contain hazardous elements and which can be potentially pollutant in landfill scenario, we performed leaching tests using three different lysimeters: one lysimeter containing only inert wastes and two lysimeters containing inert wastes mixed with hazardous demolition wastes. The leachates from these lysimeters were analysed (heavy metals, chlorides, sulphates fluoride, DOC (Dissolved Organic Carbon), phenol index, and PAH). Finally, we compared concentrations and cumulative releases of elements in leachates with the limits values of European regulation for the acceptance of inert wastes at landfill. Results indicate that limit values are exceeded for some elements. We also performed a percolation column test with only demolition hazardous wastes to evaluate the specific contribution of these wastes in the observed releases.     

Use of selected waste materials in concrete mixes

A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This study tackles the problem of the waste that is generated from construction fields, such as demolished concrete, glass, and plastic. In order to dispose of or at least reduce the accumulation of certain kinds of waste, it has been suggested to reuse some of these waste materials to substitute a percentage of the primary materials used in the ordinary portland cement concrete (OPC). The waste materials considered to be recycled in this study consist of glass, plastics, and demolished concrete. Such recycling not only helps conserve natural resources, but also helps solve a growing waste disposal crisis. Ground plastics and glass were used to replace up to 20% of fine aggregates in concrete mixes, while crushed concrete was used to replace up to 20% of coarse aggregates. To evaluate these replacements on the properties of the OPC mixes, a number of laboratory tests were carried out. These tests included workability, unit weight, compressive strength, flexural strength, and indirect tensile strength (splitting). The main findings of this investigation revealed that the three types of waste materials could be reused successfully as partial substitutes for sand or coarse aggregates in concrete mixtures.     

Effect of Ionizing Radiation on the Morphological,Thermal and Mechanical Properties of Polyvinyl Alcohol/Polyethylene Glycol Blends

Blends of water—soluble polymers based on Poly vinyl alcohol (PVA) and Polyethylene glycol (PEG) have been prepared by the solution casting technique. The effect of various doses of γ-radiation on the structural properties of PVA/PEG polymer blends with all its compositions has been investigated. From the visual observation of all the blend compositions, it was found that, the best compatibility of the blend is up to 40% PVA/60%PEG. The structure–Property behavior of all the prepared blends before and after γ-irradiation was investigated by IR Spectroscopy, thermogravimetric analysis (TGA), mechanical properties and Scanning electron microscope (SEM). The gel content and the swelling behavior of the PVA/PEG blends were investigated. It was found that the gel content increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of PEG increased in the blend. The results obtained by FTIR analysis and SEM confirm the existence of possible interaction between PVA and PEG homopolymers. TGA of PVA/PEG blend, before and after γ-irradiation, showed that the unirradiated and irradiated PVA/PEG blends are more stable against thermal decomposition than pure PVA. Improvement in tensile mechanical properties of PVA/PEG blends was occurred.     

Hydration characteristics of coconut fibre-reinforced mortars containing CSA and Portland cement

Journal of Material Cycles and Waste Management - This study aims at investigation of the effects of incorporating natural fibres and two types of cement [ordinary Portland cement and calcium...     

Ecofriendly Zinc Oxide-Decorated Poly-3-hydroxyalkanoate—graft—Poly-Methyl Acrylate Copolymer Film for Photocatalysis-Mediated Water Treatment

Journal of Polymers and the Environment - The application of microbiologically produced polymer, i.e., medium-chain-length poly-3-hydroxyalkanoate (mcl-PHA), in environmental remediation technology...     

Comparative efficacy of certain plant extracts alone and combination with profenofos against Spodoptera littoralis (Boisd.) (Lepidoptera: Noctuidae)

Ethyl alcohol, acetone, and petroleum ether extracts of three plant species belonging to three different botanical families [Strychnos nux-vomica (Loganiaceae), Euphorbia lathyrus (Euphorbiaceae), and Datura stramonlum (Solanaceae)], a chemical insecticide; profenofos and their combinations were tested against second and fourth instars of Spodoptera littoralis under lab conditions. Results revealed that the ethanol extract of S. nux-vomica was the most effective among all plant extracts, where the corrected mortality% were 92, 81, 58, and 27% to 2nd instar and 89, 74, 34, and 11% to 4th instar at concentrations 0.5, 0.25, 0.125, and 0.0625%, respectively. Calculated LC₅₀'s were 0.11, 0.22, and 0.34% to 2nd instar and 0.17, 0.37, and 0.52% to 4th instar for ethanol, petroleum ether, and acetone extracts, respectively. Acetone extracts of all plants were of lower effect. The chemical insecticide profenofos displayed higher efficacy than plant extracts (LC₅₀ = 0.002 and 0.003% for S. littoralis 2nd and 4th larval instars, respectively). The co-toxicity factor reached 76 and 60 when mixing S. nux-vomica + profenofos and D. stramonlum + profenofos at ratio 1:1 against S. littoralis 2nd instar larvae, thus indicating a potentiating effect. While treatment of the 4th instar larvae by the same mixtures resulted in a co-toxicity factor below 20 at all mixing ratios indicating, only, an additive effect against this instar.     

Production and Characterization of Sodium Alginate/Gum Arabic Based Films Enriched with Syzygium cumini Seeds Extracts for Food Application

Journal of Polymers and the Environment - Biodegradable sodium alginate/gum Arabic (SG) films were obtained. The influence of Syzygium cumini seeds extract (SCSE) incorporation in SG films on...