Effect of dissolved organic matter and bacteria on contaminant transport in riverbank filtration

A mathematical model for the transport of hydrophobic organic contaminants in an aquifer under simplistic riverbank filtration conditions is developed. The model considers a situation where contaminants are present together with dissolved organic matter (DOM) and bacteria. The aquifer is conceptualized as a four-phase system: two mobile colloidal phases, an aqueous phase, and a stationary solid phase. An equilibrium approach is used to describe the interactions of contaminants with DOM, bacteria, and solid matrix. The model is composed of bacterial transport equation and contaminant transport equation. Numerical simulations are performed to examine the contaminant transport behavior in the presence of DOM and bacteria. The simulation results illustrate that contaminant transport is enhanced markedly in the presence of DOM and bacteria, and the impact of DOM on contaminant mobility is greater than that of bacteria under examined conditions. Sensitivity analysis demonstrates that the model is sensitive to changes of three lumped parameters: K+1 (total affinity of stationary solid phase to contaminants), K+2 (total affinity of DOM to contaminants), and K+3 (total affinity of bacteria to contaminants). In a situation where contaminants exist simultaneously with DOM and bacteria, contaminant transport is mainly affected by a ratio of K+1/K+2/K+3, which can vary with changes of equilibrium distribution coefficient of contaminants and/or colloidal concentrations. In riverbank filtration, the influence of DOM and bacteria on the transport behavior of contaminants should be accounted to accurately predict the contaminant mobility.     

Metal contamination of soils and dusts in Seoul metropolitan city,Korea

To investigate the dispersion patterns and the characteristics of heavy metal contamination due to urbanisation and industrialisation, soils and dusts collected from the Seoul area were analysed for Cu, Pb, Zn and Cd. The metal concentrations in most soils and dusts are higher than the world averages. The pollution index (( Metal concentrations in soils/Permissible level for metal)÷(Number of metals)) of soils and dusts is > 1 in most of the Seoul area, a result that concurs with the industrialisation and urbanisation index of the Seoul area. The soils are contaminated with Cu, Zn, Cd and particularly Pb. This suggests that the contamination of the soils in the Seoul area are mainly caused by vehicular emissions. The pollution index of soil is the highest in the Kuro area where Cu and Zn contamination in soils are due to the indigenous brass and bronze factories. From the discriminant analysis, the Seoul area may be partitioned into control, traffic and industrialized areas by the metal concentrations in the order of Zn > Cu > Pb.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

Del(18p) syndrome with increased nuchal translucency in prenatal diagnosis

We report a de novo translocation between chromosome 15 and 18 resulting in monosomy 18p in prenatal diagnosis. The patient was referred for amniocentesis due to increased nuchal translucency (INT) (5 mm) at 13.6 weeks of gestation. Karyotype of the fetus revealed 45,XX,der(15;18)(q10;q10) in all metaphases. The targeted fetal ultrasound at 20 weeks of gestation did not show any special physical abnormalities other than 6.4 mm of nuchal fold thickness. Molecular cytogenetic findings using CGH and FISH confirmed the del(18p) with dicentromeres from both chromosome 15 and 18. The present study shows that the INT at first trimester was the only prenatal finding for the fetus with del(18p) syndrome and that molecular cytogenetic methods are useful for detecting chromosomal aberrations precisely. Copyright © 2004 John Wiley & Sons, Ltd.     

An investigation of methods for enriching trophoblast from maternal blood

Trophoblast deportation is known to occur in normal human pregnancy, but it is not yet clear whether these cells routinely enter the maternal peripheral circulation and are available as a source of fetal DNA for non-invasive prenatal diagnosis of genetic disorders. To resolve this issue requires an efficient method of enriching trophoblast from maternal blood combined with a means to confirm its identity. Five different techniques were tested on ten retroplacental blood samples to determine the most sensitive and operator-efficient method. Lysis of red cells alone gave the best recovery of trophoblast but had to be discounted, together with Ficoll density gradient centrifugation, due to the very low purity and the excessive time required. Fluorescence-activated cell sorting (FACS) of pre-enriched trophoblast resulted in the lowest recovery rate (8 per cent) despite a 3250-fold enrichment and a very high purity. Immunomagnetic beads (Dynabeads) coated with anti-CD 16 antibody proved to be the best method for the subsequent immunocytochemical characterization of deported trophoblast. However, IO beads coated with anti-CD45 antibody may be more useful for isolating trophoblast for prenatal diagnosis due to the high purity, enrichment (32-fold), and recovery rate (78 per cent) obtained with this method.     

Assessing the Removal Efficiency of Murine Norovirus 1, Hepatitis A Virus,and Human Coronavirus 229E on Dish Surfaces Through General Wash Program of Household Dishwasher

Food and Environmental Virology - The performance of dishwashers in removing live viruses is an important informative value in practical applications. Since foodborne viruses are present in...     

Physicochemical properties of chars at different treatment temperatures

In this study, the physicochemical properties of the char of Indonesian SM coal following heat treatment at various temperatures were evaluated using X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and morphological and specific surface area analysis. Based on these analyses, heat treatment of coal was determined to be the most effective in increasing the coal rank. In the XPS analysis, the C-O and C-O-C groups and quaternary-N species were found to be of a lower grade coal when the pretreatment temperature decreased, meanwhile the C-C group and pyridinic species increased. In the FT-IR analysis, the collapse of the C-O and C-O-C group was observed due to the collapse of the ether group. In SEM and Brunauer-Emmett-Teller (BET) analysis, a decrease in the ether group was shown to be accompanied with the formation of micropores.     

Improving the activity of Mn/TiO2 catalysts through control of the pH and valence state of Mn during their preparation

In this study, the authors investigated the influence of the valence state of Mn on the efficacy of selective catalytic reduction using a Mn-based catalyst. The nitrogen oxides (NOx) conversion rate of the catalyst was found to be dependent on the type of TiO2 support employed and on the temperature, as the catalyst showed an excellent conversion of > 80% at a space velocity of 60,000 hr(-1) when the temperature was above 200 degrees C. Brunauer-Emmett-Teller, X-ray diffraction, and X-ray photoelectron spectroscopy analyses confirmed that catalyst displaying the highest activity contained the Mn4+ species and that its valence state was highly dependent on the pH during the catalyst preparation.     

Exposure assessment for methyl and total mercury from seafood consumption in Korea, 2005 to 2008

Reports on the occurrence and intake assessment of mercury for Korean seafood are currently not available. This is the first report to estimate the intake of methyl (Me-Hg) and total mercury (T-Hg) from seafood consumption in Korea. The concentrations of Me-Hg and T-Hg in seafood ranged from 1.02 to 780 (mean: 55.6) ng g(-1) wet weight and 4.89 to 1008 (mean: 100) ng g(-1) wet weight, respectively. The residue levels of Me-Hg and T-Hg in Korean seafood were moderate compared with those found in other countries. The methylation ratios of fish, cephalopods and crustaceans were similar, but shellfish had lower values compared with other species. The intakes of Me-Hg and T-Hg from seafood consumption for the general population were estimated to be 38.8 and 73.8 ng kg(-1) body weight per day, respectively. Mackerel, tuna and squid made the highest contributions to the total intake of these contaminants. Among eight age groups, 30-49 year and 3-6 year age groups had the highest exposure to Me-Hg and T-Hg. The concentrations and intakes of Me-Hg and T-Hg from Korean seafood were less than the allowable residue levels and threshold intake levels suggested by Korean and international authorities. The present study may be useful for risk management of mercury in Korean seafood.