Parents' views of teen driving risks, the role of parents, and how they plan to manage the risks

PROBLEM: There is limited information about how parents view teen driving risks and intend to handle these risks during the licensing process, and how they will respond to graduated licensing provisions. METHODS: Parents in Connecticut were interviewed when their teens got their learner's permit. The survey was undertaken when the state did not have a midnight restriction or a passenger restriction. RESULTS: Generally, parents were well aware of teen driving risks, thought parents should be thoroughly involved in the licensing process, and plan to be active participants themselves. DISCUSSION: Parents were concerned about the risk of driving after midnight and already restrict that behavior. However, parents do not seem to see or understand the risks of having even one teen passenger in the vehicle. IMPACT ON INDUSTRY: The views and existing practices of parents need to be taken into account in deciding on the provisions of graduated licensing legislation and how to best ensure acceptance and compliance.     

TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.     

Seat Belt Use in States and Territories with Primary and Secondary Laws -- United States, 2006

Problem

Motor-vehicle crashes are a leading cause of death in the United States. In the event of a crash, seat belts are highly effective in preventing serious injury and death.

Methods

Data from the 2006 Behavioral Risk Factor Surveillance System were used to calculate prevalence of seat belt use by state and territory and by type of state seat belt law (primary vs. secondary enforcement).

Results

In 2006, seat belt use among adults ranged from 58.3% to 91.9% in the states and territories. Seat belt use was 86.0% in states and territories with primary enforcement laws and 75.9% in states with secondary enforcement laws.

Discussion

Seat belt use continues to increase in the United States. Primary enforcement laws remain a more effective strategy than secondary enforcement laws in getting motor-vehicle occupants to wear their seat belts.     

Driving self-regulation and ride service utilization in a multicommunity,multistate sample of U.S. older adults

Objectives: This study examined a multicommunity alternative transportation program available 24 hours a day, 7 days a week, for any purpose, offering door-through-door service in private automobiles to members who either do not drive or are transitioning away from driving. Specific aims were to describe the characteristics of members by driving status and ride service usage of these members.

Methods: Data came from administrative records maintained by a nonprofit ride service program and include 2,661 individuals aged 65+ residing in 14 states who joined the program between April 1, 2010, and November 8, 2013. Latent class analysis was used to group current drivers into 3 classes of driving status of low, medium, and high self-regulation, based on their self-reported avoidance of certain driving situations and weekly driving frequency. Demographics and ride service use rate for rides taken through March 31, 2014, by type of ride (e.g., medical, social, etc.) were calculated for nondrivers and drivers in each driving status class.

Results: The majority of ride service users were female (77%) and aged 65–74 years (82%). The primary method of getting around when enrolling for the transportation service was by riding with a friend or family member (60%). Among the 67,883 rides given, nondrivers took the majority (69%) of rides. Medical rides were the most common, accounting for 40% of all rides.

Conclusions: Reported ride usage suggests that older adults are willing to use such ride services for a variety of trips when these services are not limited to specific types (e.g., medical). Further research can help tailor strategies to encourage both nondrivers and drivers to make better use of alternative transportation that meets the special needs of older people.     

Phosphorus fractionation in lake sediments--lakes Volvi and Koronia, N. Greece

Sediments from two lakes, the meso-to-eutrophic Volvi and the hypertrophic Koronia, located in N. Greece were examined on the basis of P-fractionation. In both lakes, the rank order of P-fractions was HCl-P > NaOH-P > BD-P > NH4Cl-P. The loosely sorbed phosphorus (NH4Cl-P) represented < 1% of the sedimentary inorganic phosphorus, while the reductant phosphorus (BD-P) ranged 5-6%. The calcium bound phosphorus (HCl-P) showed considerable contribution (59-74%) to the sedimentary inorganic P-loads. The metal oxide bound phosphorus (NaOH-P) was higher in the hypertrophic (30-35%) than in the meso-to-eutrophic system (19-28%). Fine-sized sediments exhibited significantly higher concentrations of HCl-P in Volvi and NH4Cl-P in Koronia. Sampling month had significant effect in variance of most P-fractions and other sediment features in both lakes. Use was also made of multivariate statistics to identify the factors which influence the sedimentary phosphorus. NaOH-P was the most reactive fraction in Lake Volvi. Iron compounds and organic matter seem to play a significant role in regulating this labile P-budget. NH4Cl-P was the more reactive fraction in Lake Koronia which was influenced by sedimentation of P-absorbed on clay/silt fine particles.     

Construction and Economics of a Pilot/Full-Scale Biological Trickling Filter Reactor for the Removal of Volatile Organic Compounds from Polluted Air

ABSTRACT

The design and the construction of an actual 8.7-m³ pilot/ full-scale biotrickling filter for waste air treatment is described and compared with a previous conceptual scale-up of a laboratory reactor. The reactor construction costs are detailed and show that about one-half of the total reactor costs ($97,000 out of $178,000) was for personnel and engineering time, whereas ~20% was for monitoring and control equipment. A detailed treatment cost analysis demonstrated that, for an empty bed contact time of 90 sec, the overall treatment costs (including capital charges) were as low as $8.7/1000 m³ _air in the case where a nonchlorinated volatile organic compound (VOC) was treated, and $14/ 1000 m³ _air for chlorinated compounds such as CH₂Cl₂. Comparison of these costs with conventional air pollution control techniques demonstrates excellent perspectives for more field applications of biotrickling filters. As the specific costs of building and operating biotrickling filter reactors decrease with increasing size of the reactor, the cost benefit of biotrickling filtration is expected to increase for full technical-scale bioreactors.     

Phytoextraction of lead-contaminated soil using vetivergrass (<Emphasis Type="Italic">Vetiveria zizanioides</Emphasis> L.), cogongrass (<Emphasis Type="Italic">Imperata cylindrica</Emphasis> L.) and carabaograss (<Emphasis Type="Italic">Paspalum conjugatum</Emphasis> L.)

Background, Aims and Scope The global problem concerning contamination of the environment as a consequence of human activities is increasing. Most of the environmental contaminants are chemical by-products and heavy metals such as lead (Pb). Lead released into the environment makes its way into the air, soil and water. Lead contributes to a variety of health effects such as decline in mental, cognitive and physical health of the individual. An alternative way of reducing Pb concentration from the soil is through phytoremediation. Phytoremediation is an alternative method that uses plants to clean up a contaminated area. The objectives of this study were: (1) to determine the survival rate and vegetative characteristics of three grass species such as vetivergrass, cogongrass and carabaograss grown in soils with different Pb levels; and (2) to determine and compare the ability of the three grass species as potential phytoremediators in terms of Pb accumulation by plants. Methods The three test plants: vetivergrass (Vetiveria zizanioides L.); cogongrass (Imperata cylindrica L.); and carabaograss (Paspalum conjugatum L.) were grown in individual plastic bags containing soils with 75 mg kg⁻¹ (37.5 kg ha⁻¹) and 150 mg kg⁻¹ (75 kg ha⁻¹) of Pb, respectively. The Pb contents of the test plants and the soil were analyzed before and after experimental treatments using an atomic absorption spectrophotometer. This study was laid out following a 3 × 2 factorial experiment in a completely randomized design. Results On the vegetative characteristics of the test plants, vetivergrass registered the highest whole plant dry matter weight (33.85–39.39 Mg ha⁻¹). Carabaograss had the lowest herbage mass production of 4.12 Mg ha⁻¹ and 5.72 Mg ha⁻¹ from soils added with 75 and 150 mg Pb kg⁻¹, respectively. Vetivergrass also had the highest percent plant survival which meant it best tolerated the Pb contamination in soils. Vetivergrass registered the highest rate of Pb absorption (10.16 ± 2.81 mg kg⁻¹). This was followed by cogongrass (2.34 ± 0.52 mg kg⁻¹) and carabaograss with a mean Pb level of 0.49 ± 0.56 mg kg⁻¹. Levels of Pb among the three grasses (shoots + roots) did not vary significantly with the amount of Pb added (75 and 150 mg kg⁻¹) to the soil. Discussion Vetivergrass yielded the highest biomass; it also has the greatest amount of Pb absorbed (roots + shoots). This can be attributed to the highly extensive root system of vetivergrass with the presence of an enormous amount of root hairs. Extensive root system denotes more contact to nutrients in soils, therefore more likelihood of nutrient absorption and Pb uptake. The efficiency of plants as phytoremediators could be correlated with the plants’ total biomass. This implies that the higher the biomass, the greater the Pb uptake. Plants characteristically exhibit remarkable capacity to absorb what they need and exclude what they do not need. Some plants utilize exclusion mechanisms, where there is a reduced uptake by the roots or a restricted transport of the metals from root to shoots. Combination of high metal accumulation and high biomass production results in the most metal removal from the soil. Conclusions The present study indicated that vetivergrass possessed many beneficial characteristics to uptake Pb from contaminated soil. It was the most tolerant and could grow in soil contaminated with high Pb concentration. Cogongrass and carabaograss are also potential phytoremediators since they can absorb small amount of Pb in soils, although cogongrass is more tolerant to Pb-contaminated soil compared with carabaograss. The important implication of our findings is that vetivergrass can be used for phytoextraction on sites contaminated with high levels of heavy metals; particularly Pb. Recommendations and Perspectives High levels of Pb in localized areas are still a concern especially in urban areas with high levels of traffic, near Pb smelters, battery plants, or industrial facilities that burn fuel ending up in water and soils. The grasses used in the study, and particularly vetivergrass, can be used to phytoremediate urban soil with various contaminations by planting these grasses in lawns and public parks. ESS-Submission Editor: Dr. Willie Peijnenburg (wjgm.peijnenburg@rivm.nl)     

Effects of bacterial activities on the release of heavy metals from contaminated dredged sediments

The potential impact of indigenous bacterial processes on the release of heavy metals from dredged sediment deposits was investigated. Batch re-suspension experiments were conducted in order to investigate the release of Zn, Cd, Cu and Pb from a polluted anoxic sediment submitted to oxidative perturbations. The concentrations of heavy metals, sulphate and dissolved organic carbon (DOC) were periodically recorded, and cell counts were performed to follow the evolution of several bacterial species. The specific effects of microbial processes were quantified by performing re-suspension assays on sterilised samples. Moreover, the effect of an initial acidification of the system was studied. The results showed that metal release was mainly due to oxidation of sulphide minerals contained in the sediment. Sulphur-oxidising bacteria such as Acidithiobacillus thiooxidans were identified to play a major role in the process, by enhancing the oxidation kinetic. However, the acid production resulting from these reactions was almost totally buffered by the dissolution of the calcite present in the sediment. Copper was released to a lesser extent, and a strong association with organic matter was observed. Lead was not observed in solution, because of its low solubility at neutral conditions and of its re-adsorption on the solid phase. The initial acidification of the system resulted in an faster growth of the acidophilic A. thiooxidans. A subsequent pH drop originating from microbial processes was then observed during the first stages of the experiment. As a consequence, drastic increases in metal (Zn, Cd) release were observed.