Home based workers at risk: Outworkers and occupational health and safety

Outwork is work done for payment at, about or from home. Outworkers generally work under conditions which are less favourable that those of their counterparts doing similar work ‘on site’. There are significant occupational health and safety issues associated with outwork. Terms and conditions of work (e.g. rate of pay, hours of work, degree of worker control over the work process, legislative coverage etc.) will significantly influence health and safety outcomes for outworkers. The paper addresses these more general issues as well as detailing specific workplace hazards and injuries, and other health impacts arising from the work.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California

Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced inCalifornia. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables.Results from the five urban areas – Porterville, Fresno, Rancho Cordova, Brentwood and Chico – showed there were no significanthuman exposures or impacts on the environment. Spray tank concentrations ranged from 0.1–0.32%. Carbaryl concentrationsin air ranged from none detected to 1.12 g m^-3, well below the interim health screening level in air of 51.7 g m^-3. There were three detections of carbaryl in surface water nearapplication sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppbin a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54–7.12 g cm^-2, comparable to levels reported forsafe reentry of 2.4 to 5.6 g cm^-2 for citrus. Carbarylconcentrations in fruits and vegetables ranged from no detectableamounts to 7.56 ppm, which were below the U.S.EPA tolerance, allowable residue of 10 ppm.     

Processing and Physical Properties of Plastics Made from Soy Protein Polyester Blends

Blending soy protein with polyesters using a polyvinyllactam as a compatibilizer successfully made soy protein-based plastics. The polyesters used to produce blends included polycaprolactone (PCL) and Biomax (a commercial biodegradable polyester). The blends were processed by compounding extrusion and injection molding. Blends containing soy protein/Biomax-poly(vinyl alcohol) had tensile strengths ranging from 16–22 MPa, with samples containing larger percentages of the synthetic polymer exhibiting greater strengths. Blends made from soy protein, Biomax, and PCL had tensile strengths ranging from 27–33 MPa. All the blends had high Young's moduli but demonstrated brittle characteristics as evident from their low elongations at break, ranging from 1.8–3.1%. Plastics made from soy protein/polyester blends exhibited low water absorption and had good stability under ambient conditions relative to the plastics made from soy protein alone. Blends made from soy protein flour produced plastics with the lowest water absorption.     

Development of a distance-to-roadway proximity metric to compare near-road pollutant levels to a central site monitor

The primary objective of the Detroit Exposure and Aerosol Research Study (DEARS) was to compare air pollutant concentrations measured at various neighborhoods, or exposure monitoring areas (EMAs), throughout a major metropolitan area to levels measured at a central site or community monitor. One of the EMAs was located near a busy freeway (annual average daily traffic (AADT) of ～130,000) so that impacts of mobile sources could be examined. Air pollution concentrations from the roadway-proximate sites were compared to the central site monitor. The volatile organic compounds (VOCs) selected (benzene, toluene, ethylbenzene, m,p- and o-xylene, 1,3 butadiene, 1,3,5-trimethylbenzene and 4-ethyltoluene) are typically associated with mobile sources. Gradients were also evident that demonstrated the amplification of pollutant levels near the roadway compared to the community monitor. A novel distance-to-roadway proximity metric was developed to plot the measurements and model these gradients. Effective distance represents the actual distance an air parcel travels from the middle of a roadway to a site and varies as a function of wind direction, whereas perpendicular distance is a fixed distance oriented normal to the roadway. Perpendicular distance is often used as a proxy for exposures to traffic emissions in epidemiological studies.Elevated concentrations of all the compounds were found for both a summer and winter season. Effective distance was found to be a statistically significant (p < 0.05) univariate predictor for concentrations of toluene, ethylbenzene, m,p-xylene and o-xylene for summer 2005. For each of these pollutants, effective distance yielded lower p-values than the corresponding perpendicular distance models, and model fit improved. Results demonstrate that this near-road EMA had elevated levels of traffic-related VOCs compared to the community monitor, and that effective distance was a more accurate predictor of the degree to which they were elevated as a function of distance. Effective distance produced a range of distance-to-roadway values for a single site based on wind direction, thus increasing the number and range of values that could be used to plot and predict relative differences in pollutant concentrations between two sites.     

Biological responses to sediment remediation based on thin layer placement near a former pulp mill in Ward Cove, AK (USA)

In 2001, 28 acres of the bottom of Ward Cove, AK (USA) were remediated using thin layer placement, to enhance the natural recovery of contaminated sediments. The remediated areas were part of an 80-acre area of concern identified offshore from the site of a former sulfite pulp mill. The primary chemicals of concern were those commonly associated with organic enrichment near pulp mills: ammonia and 4-methylphenol. The primary remedial objectives were to reduce the toxicity of the contaminated sediments and to stimulate colonization of the remediated areas by benthic macroinvertebrates. In 2004, the initial monitoring event for the remediated areas was conducted, and included evaluations of physical/chemical sediment variables (i.e., total organic carbon, grain size distribution, ammonia, and 4-methylphenol), sediment toxicity (i.e., using the 10-day amphipod survival test with Eohaustorius estuarius), and in situ benthic macroinvertebrate communities. Results of the monitoring event showed that conditions in the remediated areas had improved considerably in the 3 years since thin layer placement had occurred. At most stations, concentrations of both ammonia and 4-methylphenol were very low, and amphipod survival was >or=90%. In addition, benthic macroinvertebrates appeared to be rapidly colonizing the remediated areas, based on evaluations of several community metrics (i.e., taxa richness, diversity, and dominance), as well as key indicator species of organic enrichment and associated transitional areas (i.e., primarily the polychaetes Capitella capitata and Nephtys cornuta, and the bivalve molluscs Axinopsida serricata and Parvilucina tenuisculpta). In general, colonization was consistent with the patterns identified for areas recovering from organic enrichment on the continental shelf of southern California and elsewhere. Based on these results, thin layer placement was considered successful in enhancing the natural recovery of the remediated sediments in Ward Cove.     

民航与环境

国际民航组织(ICAO)理事会的航空环境保护委员会(cAEP)提出了与民航有关的主要的环境问题:飞机噪音和来自飞机发动机的排放.在源头减少飞机的噪音是CAEP的工作重点,但是消除噪声和土地利用计划也受到相当大的注意.有关排放的工作可分为三类:技术和标准、管理措施和基于市场的机制.国际民航组织通过技术合作和培训计划给一些国家提供与环境有关的帮助.     

Coupled human and natural systems

Humans have continuously interacted with natural systems, resulting in the formation and development of coupled human and natural systems (CHANS). Recent studies reveal the complexity of organizational, spatial, and temporal couplings of CHANS. These couplings have evolved from direct to more indirect interactions, from adjacent to more distant linkages, from local to global scales, and from simple to complex patterns and processes. Untangling complexities, such as reciprocal effects and emergent properties, can lead to novel scientific discoveries and is essential to developing effective policies for ecological and socioeconomic sustainability. Opportunities for truly integrating various disciplines are emerging to address fundamental questions about CHANS and meet society's unprecedented challenges.     

Perinatal outcomes and genomic characteristics of fetal copy number variants: An individual record linkage study of 713 pregnancies

Objective

To determine the perinatal outcomes of fetuses diagnosed with a pathogenic copy number variant (CNV) or variant of uncertain significance (VUS); and to characterize these variants in terms of testing indication, genomic location, size, and inheritance.

Methods

Retrospective study of singleton pregnancies with a pathogenic CNV or VUS from a single laboratory during 2012–2018. Probabilistic record linkage between the prenatal diagnosis dataset and perinatal outcome data for births from 20 weeks gestation was performed. If no birth record was found, this implied a pregnancy loss <20 weeks.

Results

We included 6945 prenatal microarray results; a pathogenic CNV was detected in 230 (3.3%, 95% CI: 2.9%–3.8%) and a VUS in 483 (7.0%, 95% CI: 6.4%–7.6%). Of pregnancies with a pathogenic CNV, 20.0% (95% CI: 15.3%–25.6%) had a live birth, 3.0% (95% CI: 1.5%–6.2%) had a perinatal death (stillbirth or neonatal death), and 77% (95% CI: 71.1%–81.9%) had no birth record. Of those with a VUS, 64.4% (95% CI: 60.0%–68.5%) had a live birth, 1.8% (95% CI: 1.0%–3.5%) had a perinatal death, and no birth record was found for 33.7% (95% CI: 29.7%–38.1%). Most pathogenic CNVs (61.1%) were <7 Mb in size. The most common microdeletion syndromes were DiGeorge, Wolf-Hirschhorn, and Cri-du-chat syndromes.

Conclusion

This study provides an overview of perinatal outcomes and frequency of recurrent CNVs observed in the prenatal microarray era.