Development of Emission Factors for Polycarbonate Processing

Abstract

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 °C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.     

Integrating economic and biophysical data in assessing cost-effectiveness of buffer strip placement

The European Union Water Framework Directive (WFD) requires Member States to set water quality objectives and identify cost-effective mitigation measures to achieve "good status" in all waters. However, costs and effectiveness of measures vary both within and between catchments, depending on factors such as land use and topography. The aim of this study was to develop a cost-effectiveness analysis framework for integrating estimates of phosphorus (P) losses from land-based sources, potential abatement using riparian buffers, and the economic implications of buffers. Estimates of field-by-field P exports and routing were based on crop risk and field slope classes. Buffer P trapping efficiencies were based on literature metadata analysis. Costs of placing buffers were based on foregone farm gross margins. An integrated optimization model of cost minimization was developed and solved for different P reduction targets to the Rescobie Loch catchment in eastern Scotland. A target mean annual P load reduction of 376 kg to the loch to achieve good status was identified. Assuming all the riparian fields initially have the 2-m buffer strip required by the General Binding Rules (part of the WFD in Scotland), the model gave good predictions of P loads (345-481 kg P). The modeling results show that riparian buffers alone cannot achieve the required P load reduction (up to 54% P can be removed). In the medium P input scenario, average costs vary from ￡38 to ￡176 kg P at 10% and 54% P reduction, respectively. The framework demonstrates a useful tool for exploring cost-effective targeting of environmental measures.     

Activated carbon amendment to sequester PAHs in contaminated soil: a lysimeter field trial

Activated carbon (AC) amendment is an innovative method for the in situ remediation of contaminated soils. A field-scale AC amendment of either 2% powder or granular AC (PAC and GAC) to a PAH contaminated soil was carried out in Norway. The PAH concentration in drainage water from the field plot was measured with a direct solvent extraction and by deploying polyoxymethylene (POM) passive samplers. In addition, POM samplers were dug directly in the AC amended and unamended soil in order to monitor the reduction in free aqueous PAH concentrations in the soil pore water. The total PAH concentration in the drainage water, measured by direct solvent extraction of the water, was reduced by 14% for the PAC amendment and by 59% for GAC, 12 months after amendment. Measurements carried out with POM showed a reduction of 93% for PAC and 56% for GAC. The free aqueous PAH concentration in soil pore water was reduced 93% and 76%, 17 and 28 months after PAC amendment, compared to 84% and 69% for GAC. PAC, in contrast to GAC, was more effective for reducing freely dissolved concentrations than total dissolved ones. This could tentatively be explained by leaching of microscopic AC particles from PAC. Secondary chemical effects of the AC amendment were monitored by considering concentration changes in dissolved organic carbon (DOC) and nutrients. DOC was bound by AC, while the concentrations of nutrients (NO(3), NO(2), NH(4), PO(4), P-total, K, Ca and Mg) were variable and likely affected by external environmental factors.     

A multibiomarker approach on the Atlantic tomcod (Microgadus tomcod) in the St. Lawrence Estuary

A multibiomarker approach was developed on juvenile Atlantic tomcod (Microgadus tomcod) to evaluate the pertinence of this approach for low-cost screening assessment of the environmental quality of various coastal sites within estuaries. Several biometric indices and biomarkers (ethoxyresorufin-O-deethylase (EROD) activity, metallothionein concentration, and immune responses) were investigated on immature and maturing tomcods (≤31 months) collected in four environmentally contrasted sites in the St. Lawrence Estuary (SLE). Simultaneous examination of various age classes provides the opportunity to detect short-term responses in sensitive young-of-the-year fish (e.g., EROD induction) and longer-time effects associated with chronic exposure and bioaccumulation (e.g., metallothionein induction). Principal component analysis was helpful to discriminate between responses possibly related to contaminant exposure (EROD, metallothionein) and responses that could be affected by upstream–downstream gradient (immune response, biometric indices). Measurement of a battery of biomarkers in young tomcods at several sites along the shore of the SLE is a low-cost screening investigation useful to identify hot spots requiring further investigation with chemical analysis and additional reference sites.     

Pesticide pressure and fish farming in barrage pond in Northeastern France. Part II: residues of 13 pesticides in water, sediments, edible fish and their relationships

Residues of pesticides in fish farming productions from barrage ponds are seldom studied in spite of increasing health questionings and environmental concerns. The purpose of this study is to establish the pesticide contamination profiles of sediments and edible fish from five ponds in Northeastern France. Multi-residues method and liquid chromatography–tandem mass spectrometry analysis were used to quantify 13 pesticides (azoxystrobin, carbendazim, clomazone, diflufenican, dimethachlor, fluroxypyr, iprodion, isoproturon, mesosulfuron-methyl, metazachlor, napropamid, quizalofop and thifensulfuron-methyl). Ten sediments and 143 muscles samples were analysed, corresponding to two successive fishing campaigns (first fishing date and second fishing date (P2), about 1 year later) on five sites (noted C-0, C-25, C-45, C-75 and C-85 to express the increasing gradient of crop area). Isoproturon was present in all sediments samples (1.8–56.4 μg/kg dry weight). During P2 period, carbendazim was quantified in the fish of site C-0 (0.09?±?0.02, 0.2?±?0.1 and 0.17?±?0.06 μg/kg wet weight (ww) for roach, carp and perch, respectively). Metazachlor was only quantified in perch of the site C-25 (0.13?±?0.02 μg/kg ww). Concentrations of isoproturon were similar for the sites C-45 and C-75 with 0.4?±?0.1 and 0.75?±?0.06 μg/kg ww for carp and perch, respectively. Contamination of fish reflected generally concentrations in surroundings. Isoproturon was the most concentrated and its main source was water for perch while carp was exposed through both water and sediments, highlighting their life strategies in pond.     

Transport and attenuation of dissolved glyphosate and AMPA in a stormwater wetland

Glyphosate is an herbicide used widely and increasingly since the early 1990s in production of many crops and in urban areas. However, knowledge on the transport of glyphosate and its degradation to aminomethylphosphonic acid (AMPA) in ecosystems receiving urban or agricultural runoff is lacking. Here we show that transport and attenuation of runoff-associated glyphosate and AMPA in a stormwater wetland differ and largely vary over time. Dissolved concentrations and loads of glyphosate and AMPA in a wetland receiving runoff from a vineyard catchment were assessed during three consecutive seasons of glyphosate use (March to June 2009, 2010 and 2011). The load removal of glyphosate and AMPA by the wetland gradually varied yearly from 75% to 99%. However, glyphosate and AMPA were not detected in the wetland sediment, which emphasises that sorption on the wetland vegetation, which increased over time, and biodegradation were prevailing attenuation processes. The relative load of AMPA as a percentage of total glyphosate increased in the wetland and ranged from 0% to 100%, which indicates the variability of glyphosate degradation via the AMPA pathway. Our results demonstrate that transport and degradation of glyphosate in stormwater wetlands can largely change over time, mainly depending on the characteristics of the runoff event and the wetland vegetation. We anticipate our results to be a starting point for considering degradation products of runoff-associated pesticides during their transfer in wetlands, in particular when using stormwater wetlands as a management practice targeting pesticide attenuation.     

A New Tape Reagent for the Determination of Hydrogen Sulfide in Air

The lead acetate paper tape reagent method for the estimation of hydrogen sulfide in air has been reviewed with the conclusions that the colored spots on which the quantitative estimation is based are not stable and do not lend by themselves to accurate results. Although it may be retained for grab sampling work, the lead acetate paper tape reagent is not acceptable as a stoichiometric reagent in any case where long duration sampling periods are concerned like in air pollution studies. A new mercuric chloride paper tape reagent has been developed as a substitute. Due to the fact that the colored spots resulting from the action of hydrogen sulfide on mercuric chloride are sensitive and very stablet, this new paper tape reagent is proposed as an adequate and reliable analytical too for the estimation of hydrogen sulfide in air. Also, a more comprehensive application of the paper tape analytical system is proposed throughout a suitable control of the factor tape retention capacity vs sampling rate which imposes some restrictions in the selection of the practical working range of concentrations. Nevertheless this working range is still wide enough to encompass all the hydrogen sulfide concentrations normally encountered in the city atmosphere.     

Formaldehyde Dose-Response in Healthy Nonsmokers

Industrial, commercial, and domestic levels of formaldehyde exposure range from <0.1 to >5.0 ppm. Irritation of the eyes and upper respiratory tract predominate, and bronchoconstriction is described in case reports. However, pulmonary function and irritant symptoms together have not been assessed over a range of HCHO concentrations in a controlled environment. We investigated dose response in both symptoms and pulmonary function associated with 3-h exposures to 0.0-3.0 ppm HCHO in a controlled environmental chamber. Ten subjects were randomly exposed to 0.0, 0.5, 1.0, and 2.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise and nine additional subjects were randomly exposed to 0.0,1.0,2.0, and 3.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise. Significant dose-response relationships in odor and eye irritation were observed (p < 0.05). Nasal flow resistance was increased at 3.0 ppm (p < 0.01), but not at 2.0 ppm HCHO. There were no significant decrements in pulmonary function (FVC, FEV₁, FEF_25-75%, SGaw) or increases in bronchial reactivity to methacholine (log PD_35SGaw) with exposure to 0.5-3.0 ppm HCHO at rest or to 2.0 ppm HCHO with exercise.     

Climate change, drought risk and land capability for agriculture: implications for land use in Scotland

Land capability classification systems define and communicate biophysical limitations on land use, including climate, soils and topography. They can therefore provide an accessible format for both scientists and decision-makers to share knowledge on climate change impacts and adaptation. Underlying such classifications are complex interactions that require dynamic spatial analysis, particularly between soil and climate. These relationships are investigated using a case study on drought risk for agriculture in Scotland, which is currently considered less significant than wetness-related issues. The impact of drought risk is assessed using an established empirical system for land capability linking indicator crops with water availability. This procedure is facilitated by spatial interpolation of climate and soil profile data to provide soil moisture deficits and plant available water on a regular 1-km grid. To evaluate potential impacts of future climate change, land capability classes are estimated using both large-scale ensemble (multi-simulation) data from the HadRM3 regional climate model and local-scale weather generator data (UKCP09) derived from multiple climate models. Results for the case study suggest that drought risk is likely to have a much more significant influence on land use in the future. This could potentially act to restrict the range of crops grown and hence reduce land capability in some areas unless strategic-level adaptation measures are developed that also integrate land use systems and water resources with the wider environment.