Environmental hazards and health risk of common liquid perfluoro-n-alkanes, potent greenhouse gases

This article aimed at introducing the main physical properties and commercial/industrial uses of common liquid perfluoro-n-alkanes (including perfluoropentane, perfluorohexane, perfluoroheptane, perfluorooctane, and perfluorononane) and the environment and health hazards posed by their toxic decomposition products (especially in hydrogen fluoride and perfluoroisobutylene) because these perfluorocompounds are potent greenhouse gases, which have been blanketed into the Kyoto Protocol, but was rarely described in the National Inventory Reports by Annex I Parties. The environmental properties (including octanol-water partition coefficient, water solubility and Henry's law constant) of liquid perfluoro-n-alkanes were evaluated, and further discussed were its atmospheric implications according to the predicted properties and possible proposal for the formation of trifluoroacetic acid (CF(3)COOH) in the atmosphere by the ionized photolysis. These predicted values revealed that liquid perfluoro-n-alkanes tend to be hydrophobic and partitioned into organic matter, and they have exceptionally low solubility in water and extremely high vaporization from the water bodies, suggesting that it will sink into the atmosphere if it is released into the environment.     

Bioavailability links mode of action can improve the long-term field risk assessment for tilapia exposed to arsenic

The objective of this paper was to develop a mechanistic-based framework to explicitly incorporate the factors controlling the bioavailability, toxicodynamics and mode of action to enhance predictive ability of arsenic (As) toxicity to protect the health of farmed tilapia Oreochromis mossambicus. We linked the biotic ligand model and damage assessment model to develop a toxicokinetic model for elucidating the site-specific temporal changes of As bioavailability and to characterize how the fish regulate the metal toxicity. We built a bioavailability-mode of action-based growth toxicity model by linking a bioenergetic growth model and damage assessment model to predict how the As affects on the tilapia growth in the entire life span in site-specific field ecosystems. Here we show that the proposed model well describes the water-chemistry-dependent toxicokinetics and toxicodynamics variations of As to tilapia. We selected two local tilapia farms with different water chemistries located at southwestern Taiwan coast region to implement the proposed algorithm to predict the risk of As exposure. Results indicate that the growth toxicity of O. mossambicus in Taihsi is more sensitive than that in Peimen. We found that the effect of ion competition on the As bioavailability and their ecotoxicological effects on tilapia are more obvious in Taihsi comparing with that in Peimen. We suggested that the proposed bioavailability- and mode of action-based framework can be used to capture the biological response and regulation of tilapia to As exposures. It is applicable for a site-specific and long-term ecotoxicological risk assessment.     

运用生态学原理防治沱江水质污染

本文运用生态学原理,恢复沱江流域生态,以增流量;运用生态工程治理污染,平衡水体生态。从总本上提出了防治沱江水质污染的措施。     

Effects of chlorides on emissions of toxic compounds in waste incineration: study on partitioning characteristics of heavy metal

Chlorides derived from plastics and food residue content in MSW will affect the formation and partitioning of metal chlorides in the incineration discharges. Our study investigated the effects of waste-derived chlorides on the partitioning of heavy metals in a single-metal combustion system. The results indicate that the heavy metal partitioning behaviors are mainly affected by the presence of chloride, alkaline metals (i.e., Na, K) and moisture in the wastes. The configuration of the metal partitioning is determined by the availability of chlorine, hydrogen, and alkaline metals, or the extent to which the elements may divide from their compounds at a given combustion temperature. The effects of chlorides, including PVC, C2Cl4, FeCl3, NaCl and KCl, were also discussed.     

Effect of SiO2 on immobilization of metals and encapsulation of a glass network in slag

The final disposal of ash from an incinerator is of special concern because of the possibility of its releasing toxic substances. Melting/vitrification has been regarded as a prospective technology of ash treatment. The object of this investigation was to evaluate the effect of silica (SiO2) addition on the immobilization of hazardous metals and the encapsulation of a glass network during the vitrification process. Four specimens with SiO2/fly ash mixing ratios of 0, 0.1, 0.2, and 0.3, respectively, were tested. The mobility of metals in slag was then estimated by a sequential extraction procedure. X-ray diffraction analysis indicates that SiO2 leads to the polymerization of silicates. The encapsulation of aluminum, calcium, and magnesium would not be observed unless adequate amount of SiO2 was added. It was also found that SiO2 addition enhances the formation of a compact and interconnected glass network structure and, thus, contributes to the chemical stability of metals in slag. After vitrification, the mobility of cadmium, copper, iron, chromium, nickel, lead, and zinc was significantly reduced. However, there is no significant correlation between the immobilization of these metals and the addition of SiO2.     

Control of particle re-entrainment by wetting the exposed surface of dust samples

Experiments have been conducted in a wind tunnel to measure the emission factor of re-entrained particles from a dry or wetted dust sample with a smooth or rough surface. Effects of wind velocities and water contents in the sample on the emission factor also were investigated. The results show that re-entrainment of particles can be controlled efficiently in a certain period of time when the surface watering density is between 60 and 80 g/m2 at a wind velocity from 7 to 15 m/sec for both smooth and rough surfaces. After the effective period is elapsed, which depends on wind speeds and environmental conditions, water will eventually evaporate, and re-entrainment starts to occur again. The experimental water evaporation rates at different wind speeds are in good agreement with theoretical values. After watering for 210, 130, and 110 min at average wind velocities of 0, 2, and 4 m/sec, respectively, the dust sample must be replenished with water to avoid dust re-entrainment.     

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans from stack flue gases of sinter plants

This study investigated four sinter plants, classified into two categories--with selective catalytic reduction (SCR) (S1, S2 and S3) and without SCR (S4) as its air pollution control device. Polychlorinated dibenzofurans (PCDFs) are dominant in the stack flue gases of sinter plants with and without SCR. The polychlorinated dibenzofurans/polychlorinated dibenzo-p-dioxins (PCDFs/PCDDs) ratio exceeds 1 extremely. The degree of chlorination of the sinter plant without SCR is towards hepta and hexa congeners while that of the sinter plant with SCR is towards penta and hexa congeners. PCDD/Fs are indeed decomposed (75.5% and 69% on ng and ng TEQ bases, respectively) and not only reduced in degree of chlorination. The overall concentration in the stack flue gas of sinter plants with SCR (7.97-14.1 ng/Nm(3); 0.995-2.06 ng TEQ/Nm(3)) is lower than that of the sinter plant without SCR (28.9 ng/Nm(3); 3.10 ng TEQ/Nm(3)). In Taiwan, based on the emission factors of 0.970 microg TEQ/ton-feedstock (sinter plants with SCR) and 3.13 microg TEQ/ton-feedstock (sinter plant without SCR), the annual PCDD/F emission of 44.7 g TEQ/year from sinter plants is 60 and 121 times higher than those from municipal solid waste incinerators (0.750 g TEQ/year) and MWIs (0.369 g TEQ/year). These results show that sinter plants have become the dominating PCDD/F emission source since tighter emission limits have been applied to incinerators.     

A model for the implementation of a two-shift municipal solid waste and recyclable material collection plan that offers greater convenience to residents

Separating recyclables from municipal solid waste (MSW) before collection reduces not only the quantity of MSW that needs to be treated but also the depletion of resources. However, the participation of residents is essential for a successful recycling program, and the level of participation usually depends on the degree of convenience associated with accessing recycling collection points. The residential accessing convenience (RAC) of a collection plan is determined by the proximity of its collection points to all residents and its temporal flexibility in response to resident requirements. The degree of proximity to all residents is determined by using a coverage radius that represents the maximum distance residents need to travel to access a recycling point. The temporal flexibility is assessed by the availability of proximal recycling points at times suitable to the lifestyles of all residents concerned. In Taiwan, the MSW collection is implemented at fixed locations and at fixed times. Residents must deposit their garbage directly into the collection vehicle. To facilitate the assignment of collection vehicles and to encourage residents to thoroughly separate their recyclables, in Taiwan MSW and recyclable materials are usually collected at the same time by different vehicles. A heuristic procedure including an integer programming (IP) model and ant colony optimization (ACO) is explored in this study to determine an efficient two-shift collection plan that takes into account RAC factors. The IP model has been developed to determine convenient collection points in each shift on the basis of proximity, and then the ACO algorithm is applied to determine the most effective routing plan of each shift. With the use of a case study involving a city in Taiwan, this study has demonstrated that collection plans generated using the above procedure are superior to current collection plans on the basis of proximity and total collection distance.     

Biohydrogen production by Clostridium butyricum and Rhodopseudomonas palustris in Co-cultures

This study evaluated biohydrogen production by co-culture of Clostridium butyricum and Rhodopseudomonas palustris. C. butyricum and R. palustris were grown separately and together as batch cultures. Hydrogen production, growth, NH₄-N, total volatile fatty acid production, and sucrose degradation were monitored. The hydrogen production of the co-culture produced 562 ml, R. palustris 426 ml, and C. butyricum 333 ml. The co-culture produced 2.16 mol H₂/mol sucrose, C. butyricum and R. palustris produced 1.77 and 1.64 mol H₂/mol sucrose, respectively. The co-culture was more efficient in the hydrogen production. Therefore, the co-culture is a good method for biohydrogen fermentation.     

Characterization of carbon fractions for atmospheric fine particles and nanoparticles in a highway tunnel

Fine particles (PM_2.5) and nanoparticles (PM_0.1) were sampled using Dichotomous sampler and MOUDI, respectively, in Xueshan Tunnel, Taiwan. Eight carbon fractions were analyzed using IMPROVE thermal-optical reflectance (TOR) method. The concentrations of different temperature carbon fractions (OC1–OC4, EC1–EC3) in both PM_2.5 and PM_0.1 were measured and the correlations between OC and EC were discussed. Results showed that the ratios of OC/EC were 1.26 and 0.67 for PM_2.5 and PM_0.1, respectively. The concentration of EC1 was found to be more abundant than other elemental carbon fractions in PM_2.5, while the most abundant EC fraction in PM_0.1 was found to be EC2. The variation of contributions for elemental carbon fractions was different among PM_2.5 and PM_0.1 samples, which was partly owing to the metal catalysts for soot oxidation. The correlations between char-EC and soot-EC showed that char-EC dominated EC in PM_2.5 while soot-EC dominated EC in PM_0.1. Using eight individual carbon fractions, the gasoline and diesel source profiles of PM_0.1 and PM_2.5 were extracted and analyzed with the positive matrix factorization (PMF) method.