Fenton-混凝法处理焦化废水的试验研究

对Fenton预氧化-混凝法联用技术处理焦化废水进行了研究,探讨了Fenton氧化阶段H2O2投加量、混凝阶段pH值以及混凝剂投加量等因素对焦化废水COD去除率的影响,确定了最佳处理条件.结果表明,Fenton预氧化-混凝法处理焦化废水取得了良好效果,COD去除率达97.5%,为该工艺实际处理焦化废水提供了实验依据.     

不同深度处理工艺去除污水处理厂出水中氮磷的比较研究

城市污水厂出水直接进入天然水体、或经过深度处理后回用于灌溉、补充景观水体和回灌地下水,均需要进行安全性评价.针对北京市北小河污水处理厂出水经过深度处理后回用于奥运公园的安全性,比较了不同深度处理工艺对营养盐(氮、磷)总量和不同形态的去除效果.研究表明,二级处理本身对氮磷的去除效果十分有限,回用水需经过深度处理.在所研究的生物活性炭吸附、微滤、超滤、反渗透以及上述技术的组合工艺中,使用超滤和反渗透联用的工艺路线对脱氮除磷的效果较为理想,其他工艺对去除氮磷的效果十分有限.     

成都市PM2.5中无机组分与硝酸盐氮氧同位素变化特征

2013年1月12日～2013年1月23日和2014年8月10日～2014年8月21日在成都市城东成都理工大学校园内按昼夜采集PM_(2.5)样品,分析了PM_(2.5)样品的质量浓度、9种水溶性无机离子含量和硝酸盐的δ~(15)N和δ~(18)O。结果表明,采样期间成都市PM_(2.5)冬、夏季的质量浓度分别为161～677μg/m~3(360±118μg/m~3)和87～137μg/m~3(92±18μg/m~3),冬季超标2～9倍,属于重度污染,夏季超标1～2倍,属于轻度污染; SO_4~(2-)、NO_3~-和NH_4~+(SNA)的质量浓度占总水溶性无机离子和PM_(2.5)质量浓度的比值冬夏季分别为72%±14. 3%和65%±9. 2%,21. 1%±2. 5%和30. 3%±6. 9%,是主要的无机离子组分。结合离子相关性分析,SNA的存在形式在白天以(NH_4)_2SO_4或NH_4HSO_4为主,部分以NH_4NO_3的形式存在,而在夜间则以NH_4NO_3为主,部分以(NH_4)_2SO_4或NH_4HSO_4形式存在。成都市PM_(2.5)中硝酸盐的δ~(15)N和δ~(18)O呈冬季高、夏季低的特征。冬季,硝酸盐来源于燃煤和机动车尾气;夏季,硝酸盐来源于机动车尾气、燃煤和农业土壤释放,根据其[NO_3~-]/[SO_4~(2-)]值说明成都市冬夏季均以固定污染源(燃煤)为主,移动污染源(机动车尾气)为辅。成都市冬季大气颗粒物中硝酸盐主要由NO_x经O_3氧化形成,夏季主要经·OH氧化形成硝酸盐或N_2O_5水解生成硝酸盐。     

典型区县农村冬季取暖"煤改电"推进案例分析

近年来,我国北方地区农村冬季取暖"煤改电"持续推进带来了显著的环境效益,不过仍面临诸多挑战。本文选取石家庄市无极县、北京市门头沟区进行调研分析和经验做法案例评估,以期为管理者提供决策支持。研究发现,通过健全改造运作机制、选用高效节能设备、创新设备推广方式、精细化财政补贴政策和提高售后保障服务,无极县与门头沟区有效降低了农户设备购置成本和取暖设施运行成本,大幅削减了散煤用量,系列做法获得了农村居民的支持。同时研究指出,工程改造复杂且难度大,要凝聚多方改造合力;不同改造设备的取暖效果差异较大,要加快相关经验借鉴推广和改造后评估;低收入群体对政府财政补贴依赖性大,要制定差异化补贴政策;改造设备购买、更换、维修机制不够健全,要积极推动采购方式创新,加强设备售后服务保障体系建设。     

Observation and analysis of atmospheric volatile organic compounds in a typical petrochemical area in Yangtze River Delta, China

Volatile organic compounds (VOCs) are a kind of important precursors for ozone photochemical formation. In this study, VOCs were measured from November 5th, 2013 to January 6th, 2014 at the Second Jinshan Industrial Area, Shanghai, China. The results showed that the measured VOCs were dominated by alkanes (41.8%), followed by aromatics (20.1%), alkenes (17.9%), and halo-hydrocarbons (12.5%). The daily trend of the VOC concentration showed a bimodal feature due to the rush-hour traffic in the morning and at nightfall. Based on the VOC concentration, a receptor model of Positive Matrix Factorization (PMF) coupled with the information related to VOC sources was applied to identify the major VOC emissions. The result showed five major VOC sources: solvent use and industrial processes were responsible for about 30% of the ambient VOCs, followed by rubber chemical industrial emissions (23%), refinery and petrochemical industrial emissions (21%), fuel evaporations (13%) and vehicular emissions (13%). The contribution of generalized industrial emissions was about 74% and significantly higher than that made by vehicle exhaust. Using a propylene-equivalent method, alkenes displayed the highest concentration, followed by aromatics and alkanes. Based on a maximum incremental reactivity (MIR) method, the average hourly ozone formation potential (OFP) of VOCs is 220.49?ppbv. The most significant source for ozone chemical formation was identified to be rubber chemical industrial emissions, following one by vehicular emission. The data shown herein may provide useful information to develop effective VOC pollution control strategies in industrialized area.     

Energy-saving benefits from plug-in hybrid electric vehicles: perspectives based on real-world measurements

Promoting plug-in hybrid vehicles (PHEV) is one important option to mitigate greenhouse gas emissions and air pollutants for road transportation sector. In 2015, more than 220,000 new PHEVs were registered across the world, indicating a 25-fold growth during 2011–2015. However, more criticizes have been put forward against the current energy efficiency regulations for vehicles that are mostly depended on laboratory measurements. To better understand the real-world energy-saving and emission mitigation benefits from PHEVs, we conducted on-road testing experiments under various operating conditions for two in-use PHEVs in Beijing, China. Our results indicate that air condition usage, congested traffic conditions, and higher loading mass could significantly increase energy consumption and shorten actual all-electric distance for PHEVs. For example, the worst case (14.1 km) would occur under harshest usage conditions, which is lower by at least 35% than the claimed range over 20 km. In charge sustaining (CS) mode, real-world fuel consumption also presents a large range from 3.5 L/100 km to 6.3 L/100 km because of varying usage conditions. Furthermore, various vehicle users have significantly different travel profiles, which would lead to large heterogeneity of emission mitigation benefits among individual PHEV adopters. Therefore, this study suggests that the global policy makers should use real-world energy efficiency of emerging electrified powertrain techniques as criteria to formulate relevant regulations and supportive policies.     

溶菌酶和硫酸铝联用优化污泥脱水性能的研究

以污泥沉降体积、污泥比阻和污泥泥饼含水率为指标,考察了溶菌酶和硫酸铝联用时加药方式和加药剂量对活性污泥沉降性能及脱水性能的影响。结果表明,先投加溶菌酶后投加硫酸铝时污泥的脱水性能更佳,硫酸铝和溶菌酶的最佳投加量均为0.10 g/g TS(总固体),此时,污泥泥饼含水率和污泥比阻分别可达71.84%和0.68×1012m/kg,相比于硫酸铝单独调理分别降低了约5%和0.23×1012m/kg。污泥胞外聚合物(EPS)含量分析表明,溶菌酶和硫酸铝联用时显著降低了污泥中LB-EPS(松散附着性EPS)含量,在最佳投量下可将原污泥的LB-EPS中的蛋白质和多糖依次从(13.44±2.11)mg/L和(23.97±3.44)mg/L降至(1.72±0.32)mg/L和(8.69±0.15)mg/L,表明联合处理使得EPS中的水分得到释放,提高了脱水性能。     

基于唐南渗析原理阳离子交换膜对Cu~(2+)、Mn~(2+)、Zn~(2+)去除能力的研究

基于唐南渗析原理,采用阳离子交换膜去除原水中Cu2+、Mn2+、Zn2+等重金属离子,研究影响阳离子交换膜去除各重金属离子能力大小的机制以及2种重金属离子共存时互相干扰的机制.结果表明,阳离子交换膜可有效去除原水中Cu2+、Mn2+、Zn2+等重金属离子,去除率为75%～85%;在浓度相同下且重金属离子带相同电荷数时,其水化离子半径越小,离子扩散速度就越快,阳离子交换膜对其去除能力就越强;当重金属水化离子半径基本相同时,膜对原子序数小的重金属离子的去除能力更强;相同浓度且相同电荷数的重金属离子共存时,各离子同步被去除,但各离子之间存在干扰,越易于被离子交换的离子与其它离子共存时,其竞争能力越强,使其他离子的去除率降低越多;当待去除离子的总浓度远低于膜的交换容量时,离子共存时各离子的去除率相比离子单独存在时各离子的去除率下降幅度不大.     

广西发展燃料乙醇产业总体方案替代方案优选

规划环评的目的不是减小规划对环境的影响,而是通过比较,选出规划对环境影响最小的替代方案。本文运用AHP-模糊数学法,结合广西发展燃料乙醇产业总体方案,从大气环境、水环境、废弃物、资源承载力、资源能源消耗和生态环境保护等六个方面,合理选取指标,建立了方案布局合理性指标体系,并用AHP-模糊数学法对四种替代方案进行了计算,得出方案一的结果为77．44,方案二的结果为78．62,方案三的结果为78．23,方案四的结果为82．13。方案四为“零作为”方案,计算结果为环境本底参照值。论文以方案四为参照,同时结合各方案的隶属度,选出了最佳替代方案。     

衡阳丰乐五号西瓜空心畸形事件调查及气候影响分析

2009年6月衡阳丰乐五号西瓜出现空心、畸形现象,果农经济损失惨重。经相关部门多次调查发现,5月下旬持续低温阴雨天气是造成该事件发生的主要原因,栽培管理不当导致灾损进一步发展。历史数据分析表明,衡阳5月低温天气发生频率为67.57%,主要出现在上旬后期—中旬前期。进入新世纪以后,低温发生频率减少,强度减弱。对西瓜提前栽种似乎更加有利,但由此所带来的风险更大,为了保险起见,应大力推进设施栽培,采用小拱架双膜覆盖等栽培技术。