Toxicity identification and reduction of wastewaters from a pigment manufacturing factory

In this study, major toxicants in pigment wastewaters (i.e. raw wastewater and effluent) were determined by toxicity identification evaluations (TIEs), and changes in their toxicities due to combined gamma-ray (gamma-ray) and ozone treatments were evaluated. From TIE results using Daphnia magna, Cr(VI) and o-toluidine were identified as major toxicants in the raw wastewater with concentrations of 2.47 and 25.3mg l(-1), respectively. This was confirmed by subsequent spiking and mass balance approaches. For effluent, TIE results suggested that organic anions were likely responsible for the observed toxicities. Toxicity reduction tests showed that gamma-rays with ozone treatment after coagulation was more efficient in reducing toxicities in the raw wastewater (3.9-2.0 TU) than gamma-ray treatment alone (3.9-3.1 TU). For pigment effluent, gamma-ray/O3 treatment resulted in a complete removal of the acute toxicity.     

Assessment of pollution along the Northern Iberian shelf by the combined use of chemical and biochemical markers in two representative fish species

Muscle concentrations of organochlorinated compounds as well as biliary levels of polycyclic aromatic hydrocarbons (PAHs) and alkylphenols (APEs) were determined in two different fish species, the four-spotted megrim (Lepidorhombus boscii) and the pouting (Trisopterus luscus) collected along the Northern Iberian coast. Additionally, a set of biochemical markers namely, 7-ethoxyresorufin O-deethylase (EROD), UDP-glucuronosyltransferase (UGT) and catalase (CAT) were measured in liver subcellular fractions. Chemical analysis indicated geographical differences in pollutant loads that were further reinforced by biomarker responses. Thus, EROD activity showed a good correlation with the amount of PCBs bioaccumulated in muscle tissue of both fish species. Elevated UGT activity was observed in those individuals highly exposed to APEs and 1-naphthol. The study reinforces the need to select representative sentinel species from different habitats for biomonitoring purposes and provides further support for the use of biomarkers in assessing the health of coastal areas.     

A Decision-Support System for Prioritizing Restoration Sites on the Mississippi River Alluvial Plain

Conversion of forested wetlands to agricultural use and the resulting fragmentation of the landscape has led to concerns for the functional integrity of the Mississippi River Alluvial Plain ecosystem. We describe an effort spearheaded by The Nature Conservancy to initiate a multi-decade partnership dedicated to creating and implementing a viable, cooperative, landscape-level restoration project in the Mississippi River Alluvial Plain. Important phases of the process during the first 5 years were (1) initiation of the development of an extensive network of partners, including state and federal agencies, private land owners, conservation groups, academicians, and other interested citizens; (2) development of a geographic information system (GIS) for the entire extent of the ecosystem; and (3) for one watershed, the Tensas basin in northeastern Louisiana, refinement of a high resolution GIS to generate more detailed land-use conversion statistics to demonstrate the feasibility of a semi-objective, landscape-scale restoration planning procedure, including methodology for prioritization of existing wetland forest patches and areas most suitable for reforestation and connection via corridors.     

Carbon dioxide adsorption and cycloaddition reaction of epoxides using chitosan–graphene oxide nanocomposite as a catalyst

One of today's major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide(CO2) adsorption and conversion to valuable products by an ecofriendly approach based in chitosan/graphene oxide(CSGO) nanocomposite film. Rheological behavior indicates that the CSGO has a better solvation property than the pure chitosan. An adsorption capacity of 1.0152 mmol CO_2/g of CSGO nanocomposite at4.6 bar was observed. The catalytic behavior of the CSGO nanocomposite in the presence of tetra-n-butylammonium iodide(n-Bu4 NI) as co-catalyst was evaluated for the cycloaddition of CO_2 to epoxides, to give cyclic carbonates, in the absence of any solvent. These results strongly suggest that the CSGO nanocomposite may open new vistas towards the development of ecofriendly material for catalytic conversion and adsorption of CO_2 on industrial scale.     

Mechanical Properties, Water Vapor Permeability and Water Affinity of Feather Keratin Films Plasticized with Sorbitol

In poultry industry chicken feathers are normally hydrolyzed and used to prepare animal feed. In this work the use of this material to prepare films was investigated. Keratins were extracted from chicken feathers with 2-mercaptoethanol in concentrated urea solution using sodium dodecyl sulfate (SDS). The effect of varying the amount of sorbitol on properties of chicken feather keratin (CFK) was investigated. As the concentration of plasticizer increased, the moisture content (MC) of these films increase, the monolayer MC increased from 0.060 (without plasticizer) to 0.482 g water/g dry matter (0.30 g sorbitol/g keratin). The water vapor permeability (WVP) varied between 0.096 g/m s Pa and 8.098 g/m s Pa for films without sorbitol and with 0.30 g sorbitol/g keratin, respectively. Film strength decreased from 5.13 MPa to 0.45 MPa and the elongation at break achieved the maximum value of 52.75% for samples with 0.02 g sorbitol/g keratin. The dry matter density didn’t change significantly, varying between 0.86–0.89 g/cm³ for all samples. Films with potential applications in food packaging can be obtained from CFKs. However, further researches are necessary to decrease film solubility and increase mechanical resistance.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

Utility of laboratory streams for ecosystem toxicity studies

Laboratory stream microcosms have been used to study transport, fate, and effects of toxic substances in stream ecosystems. Several general concerns exist in utilizing laboratory streams in this way. We summarize some of the most important and difficult of these problems and endeavor to provide theoretical understanding, evaluation, and empirical approaches necessary for making laboratory stream ecosystem studies more useful in solving problems of toxic substance behavior in natural stream ecosystems. Well-designed laboratory streams and other microcosms are complex dynamic systems that can contribute to our understanding of the behavior of toxic substances. But such systems are far too complex and dynamic to be employed as bioassay, monitoring, or predictive tools, as individual organisms have been.     

Compressibility and shell failure in the European Atlantic <Emphasis Type="Italic">Patella</Emphasis> limpets

The specimens of Patella intermedia, Patella rustica, Patella ulyssiponensis and Patella vulgata were analysed for morphological and morphometric characters, and for the resistance to compression and crushing to a force applied at the apex. Shell shape in these species ranged from the high symmetrical cone, with a rounded base of P. rustica, to the flat, asymmetrical, narrow-pear-shaped base of P. ulyssiponensis. P. intermedia and P. vulgata showed intermediate morphologies. Shell thickness increased linearly with age, but differed in the four limpets. P. rustica had the thickest shells, and P. ulyssiponensis and P. vulgata had the thinnest shells. P. intermedia displayed intermediate shell thickness. Considering deformability and toughness, P. intermedia shells usually needed the highest force to compress in height, the highest pressure to collapse, and were appreciably deformed at collapse. On the opposite side, P. ulyssiponensis shells usually needed the lowest force to compress in height, the lowest pressure to collapse, and were much less deformed at collapse. P. intermedia shells were therefore the most deformable and tough, and P. ulyssiponensis, the most stiff and fragile. P. rustica and P. vulgata shells displayed intermediate behaviour. However, numerical simulations based on the finite element method using the experimentally determined shells’ geometry and thickness, but considering similar shells’ material and structure in the four species, predicted that shell toughness should be decreased in the order P. rustica >> P. intermedia > P. vulgata >> P. ulyssiponensis. P. rustica shells’ geometry (a high and centred cone) and thickness (very thick) were therefore, theoretically, the most fitted for shells to resist crushing by compression. Yet, in the experimental tests, they were not the most resistant shells. It was concluded that resistance to crushing was not a direct function of shell morphology and morphometry, but appeared to be mainly determined by shell deformability. This is most probably related to differences in the internal composition and architecture of the shell in the four species. By comparison with data reported in the literature on the pressures normally exerted by ocean waves, it was concluded that these limpets have resistances to crushing in far excess to pressures normally endured in nature, being therefore unlikely that these species are crushed by the action of even very strong waves on shores. Hard objects, like logs and boulders, can be hurled onto the shore by waves, and constitute a much greater threat to limpets than the waves themselves. The high toughness of the limpet shell can be related to resistance to the impact of incidental hard objects. There was no direct relationship between the habit preferences of these limpets and the resistance to crushing. Other factors are involved in the distribution of these species in the shores.