Effects of nutrient and temperature on degradation of petroleum hydrocarbons in contaminated sub-Antarctic soil

Mesocosm studies using sub-Antarctic soil artificially contaminated with diesel or crude oil were conducted in Kerguelen Archipelago (49 degrees 21' S, 70 degrees 13' E) in an attempt to evaluate the potential of a bioremediation approach in high latitude environments. All mesocosms were sampled on a regular basis over six months period. Soils responded positively to temperature increase from 4 degrees C to 20 degrees C, and to the addition of a commercial oleophilic fertilizer containing N and P. Both factors increased the hydrocarbon-degrading microbial abundance and total petroleum hydrocarbons (TPH) degradation. In general, alkanes were faster degraded than polyaromatic hydrocarbons (PAHs). After 180 days, total alkane losses of both oils reached 77-95% whereas total PAHs never exceeded 80% with optimal conditions at 10 degrees C and fertilizer added. Detailed analysis of naphthalenes, dibenzothiophenes, phenanthrenes, and pyrenes showed a clear decrease of their degradation rate as a function of the size of the PAH molecules. During the experiment there was only a slight decrease in the toxicity, whereas the concentration of TPH decreased significantly during the same time. The most significant reduction in toxicity occurred at 4 degrees C. Therefore, bioremediation of hydrocarbon-contaminated sub-Antarctic soil appears to be feasible, and various engineering strategies, such as heating or amending the soil can accelerate hydrocarbon degradation. However, the residual toxicity of contaminated soil remained drastically high before the desired cleanup is complete and it can represent a limiting factor in the bioremediation of sub-Antarctic soil.     

La chimie du plomb et du brome particulaire en atmosphere urbaine: I — Situation moyenne

Lead and Bromine aerosols are mainly abundant in the fine size fraction of atmospheric aerosol in Paris. Their time dependance concentration in relation with air trajectories at 850 mb can be explained if a mainly automotive contribution is assumed.Bromine to lead ratio is used to estimate the relative contribution of this important pollutant source.     

The assessment of water quality in the Lower Luján River (Buenos Aires,Argentina): phytoplankton and algal bioassays

The monitoring of river phytoplankton and several hydrological, physical and chemical variables, in combination with bioassays using Selenastrum capricornutum Printz, allowed the characterisation of three distinct reaches of the Lower River Luján. The upstream stretch, characterised by the lowest depth and discharge, registered the highest nutrient, dissolved heavy metal and chlorophyll a concentrations in accordance with low phytoplankton diversity and the occurrence of several species typical of organically polluted lowland rivers. A downstream improvement, concomitant to increasing river discharge, is revealed by a progressive decrease of organic pollution parameters even though algal toxicity is registered through bioassays. The water input from the Parana River through the G. Arias Channel plays an important role in the regulation of the limnology of the Lower Luján River. As a result of marked increasing discharge, depth and width, there is a decrease in nutrient concentration and phytoplankton density and an increase in dissolved oxygen concentration. Likewise, algal growth rates in the bioassays showed less toxic effect.     

Sorption of pentachlorophenol on pine bark

The minimization of pentachlorophenol (PCP) transport in the environment driven by industrial wastewater discharges can be accomplished by sorption in natural, available and low cost by-products like pine bark. Taking into account that PCP is a chemical which behaviour is highly dominated by the surrounding features, this work intended to evaluate the sorption kinetics and equilibrium parameters according to the pH and temperature as well as the pine bark particle size. The PCP uptake by pine bark showed to be faster in the initial phase followed by a slower process, being 24 h the suitably time to reach the sorption equilibrium in the range of pH studied. The neutral PCP species showed to have higher binding capacity to pine bark than the anionic PCP, which was reflected in a decrease in the distribution coefficient (Kd) of the linear sorption isotherm with the increase of solution pH from 2 to 7. On the other hand, between 10 degrees C and 35 degrees C, the temperature does not seem to play a significant role in the PCP sorption by pine bark, while the sorbent size is a key parameter to enhance the overall process.     

Characterization of the organic matter of sludge: determination of lipids, hydrocarbons and PAHs from road retention/infiltration ponds in France

This paper presents the results of the organic matter characterization of sludge from two ponds (retention and infiltration) located in France. Special focus was placed on studying hydrocarbons and PAHs. This investigation is part of a global project on road and urban sludge with the aim of identifying a better means for managing these materials. Gas chromatographic and GC/MS analyses indicate that the main component of the organic fraction stems from petroleum-derived products like diesel fuel and motor oil. This finding was confirmed by the presence of biomarkers from the hopane series, as well as by pyrolytic and alkylated PAHs. Results from this study clearly show that the contaminants are mainly generated from anthropogenic petroleum sources. Due to their levels of hydrocarbon contamination, these sludge deposits must be considered as waste and cannot therefore be disposed anywhere, especially within the current context of sustainable development.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.     

Persistent organochlorines in beluga whales (Delphinapterus leucas) from the St Lawrence River estuary--I. Concentrations and patterns of specific PCBs, chlorinated pesticides and polychlorinated dibenzo-p-dioxins and dibenzofurans

Blubber samples from beluga whales (Delphinapterus leucas) in the St Lawrence River estuary were analysed for PCB congeners (ortho- and non-ortho-substituted) and other persistent organochlorines as well as chlorinated dibenzo-dioxins/furans (PCDD/Fs). Major individual components (mean concentrations > 1 microg g(-1)) were 4,4'-DDE, -DDD and -DDT, T12 (a toxaphene-related compound), trans-nonachlor, oxychlordane, mirex, HCB, tris(p-chlorophenyl) methane and dieldrin. Concentrations of SigmaPCBs (8.3-412 microg g(-1)), SigmaDDT (3.36-389 microg g(-1)) and mirex (0.18-6.8 microg g(-1)) were particularly elevated relative to other odontocetes in Canadian waters. SigmaDDT, PCBs (as Aroclor), mirex and T12 concentrations were positively correlated with age of adult females (> 10 years) but only weakly, or not significantly, correlated with age of adult males. PCDD/Fs were present at low ng kg(-1) levels and consisted mainly of penta- and hexachlorofurans, and hepta- and octachlorodioxin. CB126 (3,3',4,4',5-PCB) was the most prominent non-ortho-substituted PCB congener in beluga blubber. Total TCDD toxic equivalents averaged 330 ng kg(-1) in females and 1400 ng kg(-1) in males and were dominated by CB126, and the mono-ortho-substituted congeners CB105 and CB118. Biomagnification factors (BMFs) for mirex and SigmaPCB from fish to beluga ranged from 11 to 16, and were similar to BMFs in Arctic animals, indicating that elevated levels in St Lawrence animals are a consequence of relatively high levels of recalcitrant organochlorines in prey of the beluga in the St Lawrence river system.     

Examination of environmental quality of raw and composting de-inking paper sludge

Paper sludges were traditionally landfilled or burned. Over the years, the use of paper sludges on soils has increased, as well as the concerns about their environmental effects. Therefore, the chemical characterization of paper sludges and their young (immature) compost needed to be investigated, and over 150 inorganic and organic chemicals were analyzed in de-inking paper sludge (DPS). In general, nitrogen, phosphorus and potassium contents were low but variable in raw DPS and its young compost. The contents of arsenic, boron, cadmium, cobalt, chromium, manganese, mercury, molybdenum, nickel, lead, selenium, and zinc were also low and showed low variability. However, the copper contents were above the Canadian compost regulation for unrestricted use and required a follow-up. The fatty- and resin acids, and polycyclic aromatic hydrocarbons were the organic chemicals measured at the highest concentrations. For resinic acids, care should be taken to avoid that leachates reach aquatic life. For polycyclic aromatic hydrocarbons, naphthalene should be followed until soil content reaches 0.1 microg g(-1), the maximum allowed for soil use for agricultural purposes according to Canadian Environmental Quality Guidelines. In young compost, the concentration of these chemical families decreased over time and most compounds were below the detection limits after 24 weeks of composting. In raw DPS, among the phenol, halogenated and monoaromatic hydrocarbons, dioxin and furan, and polychlorinated biphenyl families, most compounds were below the detection limits. The raw DPS and its young compost do not represent a major threat for the environment but can require an environmental follow-up.