A comparison of disposal methods for on-site sewage facilities within the state of Texas,USA

Currently, 1.5 million homes in Texas, USA utilize an on-site sewage facility to manage their household waste. This study compares the conventional septic dispersal technology of perforated pipe drain field with two of the new technologies recently implemented in Texas, multi-pipe and chamber systems, determining if soil classification and climate are influencing factors in functional ability for each of the technologies. There is no statistical significance for failure of a system with respect to system type or climate zone. The textural classification of soil is a statistically significant variable in septic system failures. Soil type III, which includes the clay groups except pure clays and silty clay, appears to significantly influence system failures. Additionally, occupant misuse and lack of maintenance are contributing factors to system failure.     

“Safety is everyone's job:” The key to safety on a large university construction site

Problem

Construction risk management is challenging.

Method

We combined data on injuries, costs, and hours worked, obtained through a Rolling Owner-Controlled Insurance Program (ROCIP), with data from focus groups, interviews, and field observations, to prospectively study injuries and hazard control on a large university construction project.

Results

Lost-time injury rates (1.0/200,000 hours worked) were considerably lower than reported for the industry, and there were no serious falls from height. Safety was considered in the awarding of contracts and project timeline development; hazard management was iterative. A top-down management commitment to safety was clearly communicated to, and embraced by, workers throughout the site.

Discussion and Impact

A better understanding of how contracting relationships, workers' compensation, and liability insurance arrangements influence safety could shift risk management efforts from worker behaviors to a broader focus on how these programs and relationships affect incentives and disincentives for workplace safety and health.     

MM5 simulations for air quality modeling: An application to a coastal area with complex terrain

A series of modifications were implemented in MM5 simulation in order to account for wind along the Santa Clarita valley, a north–south running valley located in the north of Los Angeles. Due to high range mountains in the north and the east of the Los Angeles Air Basin, sea breeze entering Los Angeles exits into two directions. One branch moves toward the eastern part of the basin and the other to the north toward the Santa Clarita valley. However, the northward flow has not been examined thoroughly nor simulated successfully in the previous studies. In the present study, we proposed four modifications to trigger the flow separation. They were (1) increasing drag over the ocean, (2) increasing soil moisture content, (3) selective observational nudging, and (4) one-way nesting for the innermost domain. The Control run overpredicted near-surface wind speed over the ocean and sensible heat flux, in an urbanized area, which justifies the above 1st and 2nd modification. The Modified run provided an improvement in near-surface temperature, sensible heat flux and wind fields including southeasterly flow along the Santa Clarita valley. The improved MM5 wind field triggered a transport to the Santa Clarita valley generating a plume elongated from an urban center to the north, which did not exist in MM5 Control run. In all, the modified MM5 fields yielded better agreement in both CO and O₃ simulations especially in the Santa Clarita area.     

Valuation of open space and conservation features in residential subdivisions

Conservation subdivision design has been promoted as a way to protect ecologically sensitive areas while maintaining housing densities comparable to standard subdivisions, but many developers and planners question the appeal of conservation design to consumers. This study was conducted to compare economic aspects of conservation subdivision design to standard subdivision design in the midwestern United States. Three methods were used to determine the value homebuyers have for embedded conservation features in residential areas: transactional analyses (to indicate the value homebuyers have expressed for such features in the past); hedonic analyses (to determine the proportion of present value of homes attributable to such features); and contingent valuation (to examine willingness to pay according to homebuyers' preferred features, an indicator of potential future investment). Transactional analyses were based on assessment and transaction data for homes in three conservation-oriented subdivisions and three standard subdivisions in Cedar Rapids, Iowa, United States. Hedonic price models were also derived from assessment and transaction data. Contingent valuation analyses were based on a survey of residents in the same six subdivisions. Transactional data indicated higher 5-year appreciation rates for conservation versus standard subdivision design. Hedonic price models revealed that well-integrated conservation features (e.g. protected stream corridors) within subdivisions have a positive effect on home prices. Sixty-six percent of all respondents indicated willingness to pay for more embedded open space. Maximum willingness to pay was related to several factors including income, gender, desired level of open space, and concern about urban development. Overall, these results indicate that consumer demand and willingness to pay for conservation subdivision design are positive and should not be considered a barrier to implementation.     

Personalized Nutrition and Social Justice: Ethical Considerations Within Four Future Scenarios Applying the Perspective of Nussbaum’s Capabilities Approach

The idea of personalized nutrition (PN) is to give tailored dietary advice based on personal health-related data, i.e. phenotoype, genotype, or lifestyle. PN may be seen as part of a general trend towards personalised health care and currently various types of business models are already offering such services in the market. This paper explores ethical issues of PN by examining how PN services within the contextual environment of four future scenarios about health and nutrition in Europe might affect aspects of social justice according to Martha Nussbaum’s capability approach. The scenarios have been created by a mixed group of stakeholders and experts in three consecutive workshops. This resulted in the definition of four future scenarios within a scenario space consisting of two variables: the ‘logic of health care systems’ and ‘conception of health’. Within each scenario, PN is likely to play a more or less important role in improving health by influencing food consumption patterns in society. Nussbaum’s capability approach implies a concept of social justice as a function of a minimum standard of human dignity. This denotes an account for equality in terms of a minimum of entitlements. However, also the ability of achieving individual objectives is essential for social justice. Personalisation advice in health and food consumption patterns, as aimed for by PN, is therefore acceptable provided a minimum of entitlements is guaranteed to all members of a society, and at the same time freedom concerning personal preferences is respected. Potential variation of how different people might benefit from PN should therefore be consistent with the minimum required as defined by the list of capabilities.     

Analysis of organic nitrogen removal in municipal wastewater by reverse osmosis

The results of a pilot study that was conducted to determine the total nitrogen removal by the reverse osmosis process are presented. The organic nitrogen removal rates are compared with removals observed from three full-scale reverse osmosis facilities and four pilot studies. The results of this analysis suggest that organic nitrogen removal is variable and that reverse osmosis may not consistently produce total nitrogen levels less than 1.0 mg/L without additional treatment. Three hypotheses to explain the variability in organic nitrogen removal in the different data sets are presented.     

Remote estimation of phycocyanin (PC) for inland waters coupled with YSI PC fluorescence probe

Nuisance cyanobacterial blooms degrade water resources through accelerated eutrophication, odor generation, and production of toxins that cause adverse effects on human health. Quick and effective methods for detecting cyanobacterial abundance in drinking water supplies are urgently needed to compliment conventional laboratory methods, which are costly and time consuming. Hyperspectral remote sensing can be an effective approach for rapid assessment of cyanobacterial blooms. Samples (n?=?250) were collected from five drinking water sources in central Indiana (CIN), USA, and South Australia (SA), which experience nuisance cyanobacterial blooms. In situ hyperspectral data were used to develop models by relating spectral signal with handheld fluorescence probe (YSI 6600 XLM-SV) measured phycocyanin (PC in cell/ml), a proxy pigment unique for indicating the presence of cyanobacteria. Three-band model (TBM), which is effective for chlorophyll-a estimates, was tuned to quantify cyanobacteria coupled with the PC probe measured cyanobacteria. As a comparison, two band model proposed by Simis et al. (Limnol Oceanogr, 50(11): 237–245, 2005; denoted as SM05) was paralleled to evaluate TBM model performance. Our observation revealed a high correlation between measured and estimated PC for SA dataset (R ²?=?0.96; range: 534–20,200 cell/ml) and CIN dataset (R ²?=?0.88; range: 1,300–44,500 cell/ml). The potential of this modeling approach for imagery data were assessed by simulated ESA/Centinel3/OLCI spectra, which also resulted in satisfactory performance with the TBM for both SA dataset (RMSE %?=?26.12) and CIN dataset (RMSE %?=?34.49). Close relationship between probe-measured PC and laboratory measured cyanobacteria biovolume was observed (R ²?=?0.93, p?<?0.0001) for the CIN dataset, indicating a stable performance for PC probe. Based on our observation, field spectroscopic measurement coupled with PC probe measurements can provide quantitative cyanobacterial bloom information from both relatively static and flowing inland waters. Hence, it has promising implications for water resource managers to obtain information for early warning detection of cyanobacterial blooms through the close association between probe measured PC values and cyanobacterial biovolume via remote sensing modeling.     

Impact of drying and composting procedures on the concentrations of 4-nonylphenols, di-(2-ethylhexyl)phthalate and polychlorinated biphenyls in anaerobically digested sewage sludge

Enhanced treatments of sewage sludge produce a more manageable product for agricultural use by stabilizing the material, removing water, and reducing the possibility of pathogen transfer. We investigated the impact of pilot-scale composting and drying of sludge on physicochemical characteristics and on the concentrations of some organic contaminants. During the 143 day composting procedure, organic matter fell 22% and moisture by half. Concentrations of 4-nonylphenols (4-NPs) fell by 88% and di-(2-ethylhexyl) phthalate (DEHP) by 60%; losses continued throughout the procedure. Losses of total polychlorinated biphenyls (PCBs) were 11%, mostly from the lower molecular weight congeners, suggesting volatilization as the most likely loss mechanism. The drying process was much shorter, 40 days, yet organic matter content decreased by 27% and moisture by 85%. Losses of 4-NPs (39%) and DEHP (22%) were less than in composting and stopped when moisture content became constant. There were no losses of PCBs. Both treatments are simple, practical procedures that reduce the volume of waste and are applicable in situ on farms. Composting would be the method of choice for reducing organic contaminants but requires much longer times than drying.     

The effect of manipulating sediment pH on the porewater chemistry of copper- and zinc-spiked sediments

Spiking of sediment with metal cations that readily hydrolyse causes the sediment pH to decrease. Displaced iron and manganese also oxidise and hydrolyse, further lowering sediment pH. The lower pH of metal-spiked sediments requires a subsequent sediment neutralisation. This research compared the pH adjustment of Cu- and Zn-spiked sediments using single and multiple additions of 1M NaOH. Sediment pH, redox potential, and porewater metal concentrations were monitored over 40 days. Depth profiles were also measured to investigate stratification. A single pH adjustment to pH 7 and 8 initially counteracted the pH change caused by metal additions, however, pH continued to decrease slowly thereafter. Multiple pH adjustments diminished porewater Cu, Zn and Fe concentrations to a greater extent than a single pH adjustment, but the ongoing oxidative precipitation of porewater metals continued to consume OH(-) ions and impede pH maintenance. Displacement of high iron(II) concentrations and the opposing rates of iron(II) oxidative precipitation and bacterially-mediated iron(II) production, affected the partitioning of the added metals between the sediment and pore water. Despite similar pH over the spiked-metal concentration gradient following pH adjustment, sediments spiked with higher metal concentrations produced lower porewater Fe concentrations, possibly due to toxicity to iron(III) oxyhydroxide reducing bacteria. Distinct stratification of redox potential and dissolved Fe and Cu developed over a depth of 6cm during the 40-day equilibration period. Recommendations are provided on methods for preparing metal-spiked sediments in which the partitioning of metals between dissolved and particulate phases better resembles that of in situ (field) metal-contaminated sediments.     

Derivation of motor vehicle tailpipe particle emission factors suitable for modelling urban fleet emissions and air quality assessments

Background, aim and scope  

Urban motor vehicle fleets are a major source of particulate matter pollution, especially of ultrafine particles (diameters < 0.1 μm), and exposure to particulate matter has known serious health effects. A considerable body of literature is available on vehicle particle emission factors derived using a wide range of different measurement methods for different particle sizes, conducted in different parts of the world. Therefore, the choice as to which are the most suitable particle emission factors to use in transport modelling and health impact assessments presented as a very difficult task. The aim of this study was to derive a comprehensive set of tailpipe particle emission factors for different vehicle and road type combinations, covering the full size range of particles emitted, which are suitable for modelling urban fleet emissions.