Flotation of metal-loaded clay anion exchangers. Part I: the case of chromates

Synthetic hydrotalcite-like layered materials are known for their ability to remove anions, like the chromates. These sorbents usually exist in powder form, thereby exhibiting high surface area and rapid kinetics for adsorption, but presenting appreciable problems in the subsequent solid/liquid separation process. Almost complete removals were obtained in this paper, from batchwork dispersed-air flotation in presence of a flocculant. Due to the experienced difficulty of flotation of thermally activated (at 500 degrees C) hydrotalcite metal-loaded particles, the application of various surfactants was studied. Continuous-flow laboratory runs certified also the effectiveness of this combined process of sorptive flotation, a promising innovative treatment technology.     

Dynamics of radionuclide concentrations in calcified tissues of reindeer in the western Russian Arctic

The specific activities of artificial and natural nuclides were determined in bone and teeth of reindeer that had lived before, during, and after nuclear tests on the Archipelago Novaya Zemlya and of reindeer from the nearby mainland region. In bone of reindeer from Novaya Zemlya, 90Sr and 210Pb are the main source of beta-activity, the 210Po is the main source of the alpha activity. In bone of reindeer that lived on Novaya Zemlya during underground tests, the 90Sr activity was relatively high (0.75 +/- 0.20 Bq/g dry weight). In animals that lived after the tests were banned, the level was significantly lower (0.44 +/- 0.17 Bq/g) and did not differ from the level of the 90Sr activity found in the mainland reindeer bone. On Novaya Zemlya, the concentrations of the natural 210Pb in bone of the recent reindeer (0.57 +/- 0.19 Bq/g) is similar to that which was in the teeth of reindeer a hundred years ago (0.65-0.75 Bq/g) and significantly higher than in the recent mainland reindeer from different regions (0.18-0.17 Bq/g).     

Nutrient losses by surface run-off following the application of organic manures to arable land. 2. Phosphorus

Phosphorus (P) surface run-off losses were studied following organic manure applications to land, utilising a purpose-built facility on a sloping site in Herefordshire under arable tillage. Different rates and timing of cattle slurry, farm yard manure (FYM) and inorganic nitrogen (N) and P fertiliser were compared, over a 4-year period (1993-97). N losses from the same studies are reported in a separate paper. The application of cattle FYM and, especially slurry, to the silty clay loam soil increased both particulate and soluble P loss in surface water flow. Losses via subsurface flow (30 cm interflow) were consistently much lower than via surface water movement and were generally unaffected by treatment. Increased application of slurry solids increased all forms of P loss via surface run-off; the results suggested that a threshold for greatly increased risk of P losses via this route, as for N, occurred at ca. 2.5-3.0 t/ha solids loading. This approximates to the 50 m3/ha application rate limit suggested for slurry within UK 'good agricultural practice'. The studies also provided circumstantial evidence of the sealing of the soil surface by slurry solids as the major mechanism by which polluting surface run-off may occur following slurry application on susceptible soils. Losses of total and soluble P, recorded for each of the 4 years of experiments, reached a maximum of only up to 2 kg/ha total P (TP), even after slurry applications initiating run-off. Whilst these losses are insignificant in agronomic terms, peak concentrations of P (up to 30,000 micrograms/l TP) in surface water during a run-off event, could be of considerable concern in sensitive catchments. Losses of slurry P via surface run-off could make a significant contribution to accelerated eutrophication on entry to enclosed waters, particularly when combined with high concentrations of NO3(-)-N. Restricting slurry application rates to those consistent with good agronomic practice, and within the limits specified in existing guidelines on good agricultural practice, offers the simplest and most effective control measure against this potentially important source of diffuse pollution.     

Immunotoxicity risks associated with land-treatment of petrochemical wastes revealed using an in situ rodent model

Land-treatment of petrochemical wastes is a widely used method to dispose of hazardous and non-hazardous waste by biodegradation. However, no comprehensive assessment of the impact of such disposal techniques on terrestrial ecosystems has been conducted. Despite the presence of suspected immunotoxicants in the soil, wild rodents frequently reside on these waste sites after closure or abandonment. We explored the seasonal sensitivity of the immune system of the hispid cotton rat (Sigmodon hispidus) to in situ exposures on sites land-treated with petrochemical wastes. Animals were monitored on five contaminated land-treatment sites and five ecologically matched-reference sites in Oklahoma, USA, over two seasons (summer and winter). Most hematological parameters were not adversely affected by land-treatment; however, platelet counts were 26% greater in cotton rats from land-treatment sites compared to reference sites in winter. Significant treatment-related differences were observed in total serum protein concentrations, organ mass and organ cellularity, but these differences were not consistent across the five land-treatment units. Lymphoproliferative responses of cotton rat splenocytes stimulated in vitro were elevated for a T-cell mitogen and depressed for a B-cell mitogen in animals from land-treatment compared to reference sites. The ability of splenocytes to proliferate in response to interleukin-2 receptor-binding was not influenced by treatment. Total yields of peritoneal cells, yield of peritoneal macrophages, and yield of peritoneal lymphocytes were influenced to varying degrees by land-treatment. Functionally, in vitro metabolic activity of peritoneal macrophages was 114% greater in cotton rats from land-treatment sites compared to reference sites during summer. These results indicate that petrochemical wastes applied to soils on these five land-treatment sites had variable immunomodulatory effects in resident cotton rats. Immune alterations for some assays were indicative of enhancement on some land-treatment sites while suppressive on other land-treatment sites, which could have been a function of type and concentration of immunotoxicants present on each site and highlights the uniqueness of each land-treatment site.     

Factors controlling the bioaccumulation of mercury and methylmercury by the estuarine amphipod Leptocheirus plumulosus

The bioaccumulation of inorganic mercury (HgI) and monomethylmercury (MMHg) by benthic organisms and subsequent trophic transfer couples the benthic and pelagic realms of aquatic systems and provides a mechanism for transfer of sedimentary contaminants to aquatic food chains. Experiments were performed to investigate the bioavailability and bioaccumulation of particle-associated HgI and MMHg by the estuarine amphipod Leptocheirus plumulosus to further understand the controls on bioaccumulation by benthic organisms. HgI and MMHg are particle reactive and have a strong affinity for organic matter, a potential food source for amphipods. Microcosm laboratory experiments were performed to determine the effects of organic matter on Hg bioaccumulation and to determine the major route of Hg uptake (i.e. sediment ingestion, uptake from water/porewater, or uptake from 'food'). Amphipods living in organic-rich sediment spiked with Hg accumulated less Hg than those living in sediments with a lower organic matter content. Feeding had a significant impact on the amount of HgI and MMHg accumulated. Similarly, amphipods living in water with little organic matter accumulated more Hg than those living in water with a greater percentage of organic matter. MMHg was more readily available for uptake than HgI. Experimental results, coupled with results from a bioaccumulation model, suggest that accumulation of HgI and MMHg from sediment cannot be accurately predicted based solely on the total Hg, or even the MMHg, concentration of the sediment, and sediment-based bioaccumulation factors. All routes of exposure need to be considered in determining the accumulation of HgI and MMHg from sediment to benthic invertebrates.     

PCDD/F inhibition by prior addition of urea to the solid fuel in laboratory experiments and results statistical evaluation

The objectives of this work were to study the effect of urea addition to the fuel before the combustion on the suppression of PCDD/F emissions, to examine the influence of urea to PCDD/F isomer patterns by employing statistical analysis techniques and to determine the most effective method of urea addition. Urea in the form of powder and as an aqueous solution was mixed with RDF and the fuel mixtures were incinerated in a lab-scale reactor at 1000 degrees C. PCDD/F emitted during combustion experiments were collected in a quartz wool filter downstream the reactor unit. Analysis and quantification of PCDD/F showed that urea significantly affected PCDD/F emissions. Combustion of RDF containing 10% w/w urea resulted in PCDD/F emissions lower than 8 I-TEQ ng/g RDF, while the corresponding average value from single RDF combustion was 17 I-TEQ ng/g RDF. The PCDD/F prevention capacity of urea was independent from the method of urea addition to the fuel, as similar results were obtained after the addition of urea in the solid and in the aqueous phases. Results assessment by statistical methods showed that isomer patterns remained almost stable and were not affected by the method of urea addition.     

PAH and soot emissions from burning components of medical waste: examination/surgical gloves and cotton pads

This is a laboratory investigation on the emissions from batch combustion of representative infectious ("red bag") medical waste components, such as medical examination latex gloves and sterile cotton pads. Plastics and cloth account for the majority of the red bag wastes by mass and, certainly, by volume. An electrically heated, horizontal muffle furnace was used for batch combustion of small quantities of shredded fuels (0.5-1.5 g) at a gas temperature of approximately 1000 degrees C. The residence time of the post-combustion gases in the furnace was approximately 1 s. At the exit of the furnace, the following emissions were measured: CO, CO2, NOx, particulates and polynuclear aromatic compounds (PACs). The first three gaseous emissions were measured with continuous gas analyzers. Soot and PAC emissions were simultaneously measured by passing the furnace effluent through a filter (to collect condensed-phase PACs) and a bed of XAD-4 adsorbent (to capture gaseous-phase PACs). Analysis involved soxhlet extraction, followed by gas chromatography-mass spectrometry (GC-MS). Results were contrasted with previously measured emissions from batch combustion of pulverized coal and tire-derived fuel (TDF) under similar conditions. Results showed that the particulate soot) and cumulative PAC emissions from batch combustion of latex gloves were more than an order of magnitude higher than those from cotton pads. The following values are indicative of the relative trends (but not necessarily absolute values) in emission yields: 26% of the mass of the latex was converted to soot, 11% of which was condensed PAC. Only 2% of the mass of cotton pads was converted to soot, and only 3% of the weight of that soot was condensed PAC. The PAC yields from latex were comparable to those from TDF. The PAC yields from cotton were higher than those from coal. A notable exception to this trend was that the three-ring gas-phase PAC yields from cotton were more significant than those from latex. Emission yields of CO and CO2 from batch combustion of cotton were, respectively, comparable and higher than those from latex, despite the fact that the carbon content of cotton was half that of latex. This is indicative of the more effective combustion of cotton. Nearly all of the mass of carbon of cotton gasified to CO and CO2 while only small fractions of the carbon in latex were converted to CO2 and CO (20% and 10%, respectively). Yields of NOx from batch combustions of latex and cotton accounted for 15% and 12%, respectively, of the mass of fuel nitrogen indicating that more fuel nitrogen was converted to NOx in the former case, possibly due to higher flame temperatures. No SO2 emissions were detected, indicating that during the fuel-rich combustion of latex, its sulfur content was converted to other compounds (such as H2S) or remained in the soot.     

Evidence for the contribution of methane in the formation of aromatics and soot in fuel-rich pre-mixed combustion

Experimental results from an isothermal laminar flow reactor at atmospheric pressure are presented on the chemical composition in the post-oxidative region of two sooting fuel-rich pre-mixed mixtures diluted in nitrogen. A base case composed of n-heptane and O2 in N2 at 1425 K with a C/O of 2.85 was perturbed by substituting 10% of the carbon in n-heptane with carbon as CH4. While these changes would intuitively reduce aromatics and soot formation by increasing H2 and decreasing C2H2 concentrations, we observe the opposite. The concentrations of individual aromatic species are observed to actually increase by up to 50% and the soot yield increases by 80%.     

Dimethylcarbonate for eco-friendly methylation reactions

Dimethylcarbonate (DMC), an environmentally friendly substitute for dimethylsulfate and methyl halides in methylation reactions, is a very selective reagent. Both under gas-liquid phase transfer catalysis (GL-PTC) and under batch conditions, with potassium carbonate as the catalyst, the reactions of DMC with methylene-active compounds (arylacetonitriles and arylacetoesters, aroxyacetonitriles and methyl aroxyacetates, benzylaryl- and alkylarylsulphones) produce monomethylated derivatives, with a selectivity not previously observed (i.e., >99%). The highly selective O-methylation of phenols and p-cresols by DMC is also attained by a new methodology using a continuous fed stirred tank reactor (CSTR) filled with a catalytic bed of polyethyleneglycol (PEG) and potassium carbonate.     

Guest dechlorination and covalent capture following photoexcitation of inclusion complexes in water

Photoexcitation of complexes between cyclophane 1 and 1- or 2-chloronaphthalene in aqueous solution leads to rapid dechlorination of the guest, a reaction driven by electron transfer from host to excited guest. The main photoproducts contain a naphthyl group covalently attached to the host framework. The results may lead to new approaches for remediating water contaminated with chlorinated aromatic compounds.