Conductive-diamond electrochemical oxidation of chlorpyrifos in wastewater and identification of its main degradation products by LC-TOFMS

The electrochemical transformation of the organophosphorous insecticide chlorpyrifos (CPF) was investigated in wastewater. The oxidation of CPF was carried out in a single-compartment electrochemical flow cell working under batch operation mode, using diamond-based material as anode and stainless steel as cathode. In order to evaluate its persistence and degradation pathway, two different concentration levels (1.0 mg L⁻¹ and 0.1 mg L⁻¹) were studied. Liquid chromatography/mass spectrometry was used for evaluation of the initial and electrolyzed solutions. The identification of CPF transformation products was performed by liquid chromatography-time of flight-mass spectrometry (LC-TOFMS). Results showed that CPF is completely removed at the end of treatment time. Analysis by LC-TOFMS allowed the identification of six degradation products (with Mw 154, 170, 197, 305 321 and 333). Three of the identified intermediates (Mw 170, 305 and 321) were completely removed at the end of electrolysis time. Interestingly, the formation of diethyl 3,5,6-trichloropyridin-2yl phosphate (chlorpyrifos oxon) and 3,5,6-trichloropyridin-2-ol was also found in previous reported degradation pathways using different degradation technologies.     

Differentiation of nitrous oxide emission factors for agricultural soils

Nitrous oxide (N₂O) direct soil emissions from agriculture are often estimated using the default IPCC emission factor (EF) of 1%. However, a large variation in EFs exists due to differences in environment, crops and management. We developed an approach to determine N₂O EFs that depend on N-input sources and environmental factors. The starting point of the method was a monitoring study in which an EF of 1% was found. The conditions of this experiment were set as the reference from which the effects of 16 sources of N input, three soil types, two land-use types and annual precipitation on the N₂O EF were estimated. The derived EF inference scheme performed on average better than the default IPCC EF. The use of differentiated EFs, including different regional conditions, allows accounting for the effects of more mitigation measures and offers European countries a possibility to use a Tier 2 approach.     

Occupational exposure to formaldehyde in an institute of morphology in Brazil: a comparison of area and personal sampling

Background, aims, and scope

Formaldehyde (FA) is a harmful chemical, which is classified as carcinogenic to humans (Group 1) by the International Agency for Research on Cancer. Solutions of FA that are used to preserve cadavers in research and education morphological institutes represent a risk to occupational health of professionals and students. During the dissection of cadavers in the anatomy laboratories, FA vapors are emitted, resulting in the exposure of students and their instructors to elevated levels of FA. The World Health Organization recommends an air quality guideline value of 0.1 mg m^?3 for exposure to FA. The limit of occupational exposure adopted by the Brazilian legislation (2.3 mg m^?3) is markedly higher than those adopted by institutions of other countries around the world. The purpose of this study was to determine the levels of personal exposure and the area concentration of FA in the morphology department of the Federal Fluminense University, Brazil, and investigate and compare the relationship between them.

Methods

Four rooms distributed in the three floors of the Morphology Department were evaluated: the embalming laboratory, the anatomy laboratories, the corridor of the teachers?? rooms, and the entrance hall. Thirty-six samples in total were collected in the second semester of 2010 and first semester of 2011. The air sampling and FA analysis were performed according to the EPA TO-11A Protocol, using a diffusive sampling device for carbonyl compounds. Personal samples were collected from monitors using a sampling device pinned on each person??s lapel. The samples were analyzed using rapid resolution liquid chromatography with UV-DAD detection at 360 nm.

Results and discussion

The concentrations of FA ranged from 0.20 and 0.18 mg m^?3 in the corridor between the teachers?? rooms, 0.03 to 0.37 mg m^?3 in the entrance hall, 0.22 to 2.07 mg m^?3 in the anatomy laboratory, 2.21 to 2.52 mg m^?3, in the embalming room. The levels found in the corridor between the teachers?? rooms and in the entrance hall were lower than in other compartments because of their large distances to the sources of FA and better ventilation. The other rooms presented higher levels of FA because of the activities carried there (embalming and dissection procedures). Even in the rooms that showed the lowest levels of FA, the values found were higher than those established by all international guideline limits, except the Brazilian legislation limit, although, the concentration level in the embalming room was even greater than the Brazilian guideline. These concentrations are 100?C1,000-fold higher than those reported in an FA outdoor study. The exposure levels of monitors and students ranged from 1.89 to 4.82 mg m^?3, indicating that current practices at the Morphology Department at the university would represent a health risk. The simultaneous monitoring of area concentrations and personal exposure showed that the characteristics of classes and of cadavers?? parts, the number of students in the room and even the activities of the monitors influence the FA concentrations.

Conclusion

This study revealed that the concentration of FA was low in the ventilated areas of the Morphology Department, and that the personal exposure when the person was close to the cadavers during the dissection procedure was higher than the mean FA concentration. This should be considered in the risk assessment of FA during these activities without effective protection equipment. It is suggested that the Brazilian legislation of exposure to formaldehyde requires an urgent update considering international legislation.     

Flora and Vegetation of Tasiilaq,Formerly Angmagssalik,Southeast Greenland: A Comparison of Data Between Around 1900 and 2007

The changes in the vascular plant flora of Tasiilaq, low arctic Southeast Greenland, between around 1900 and 2007 were studied by comparing the data from historical literature with those of the field observations performed between the late 1960s and 2007. Since 1900, the percentage of widely distributed arctic species distinctly decreased, whereas that of the low arctic species somewhat increased, and boreal species hardly increased. Vegetation monitoring revealed minor changes and showed that several thermophilous and xerophilous species increased between 1968/1969 and 2007, whereas some hygrophilous species decreased. Repeated vegetation mapping of a shallow pond revealed conspicuous changes suggesting increased evaporation/precipitation ratios associated with environmental warming up and decreasing snow accumulation in winter, in line with results of previous investigations. In spite of climate warming, expansion of the town and increasing human impact, flora and vegetation on the whole appeared rather stable during the last 40 years without invading species or introductions.     

Mercury, lead and cadmium in human milk in relation to diet, lifestyle habits and sociodemographic variables in Madrid (Spain)

Background

Although breastfeeding is the ideal way of nurturing infants, it can be a source of exposure to toxicants. This study reports the concentration of Hg, Pb and Cd in breast milk from a sample of women drawn from the general population of the Madrid Region, and explores the association between metal levels and socio-demographic factors, lifestyle habits, diet and environmental exposures, including tobacco smoke, exposure at home and occupational exposures.

Methods

Breast milk was obtained from 100 women (20 mL) at around the third week postpartum. Pb, Cd and Hg levels were determined using Atomic Absorption Spectrometry. Metal levels were log-transformed due to non-normal distribution. Their association with the variables collected by questionnaire was assessed using linear regression models. Separate models were fitted for Hg, Pb and Cd, using univariate linear regression in a first step. Secondly, multivariate linear regression models were adjusted introducing potential confounders specific for each metal. Finally, a test for trend was performed in order to evaluate possible dose-response relationships between metal levels and changes in variables categories.

Results

Geometric mean Hg, Pb and Cd content in milk were 0.53 μg L⁻¹, 15.56 μg L⁻¹, and 1.31 μg L⁻¹, respectively. Decreases in Hg levels in older women and in those with a previous history of pregnancies and lactations suggested clearance of this metal over lifetime, though differences were not statistically significant, probably due to limited sample size. Lead concentrations increased with greater exposure to motor vehicle traffic and higher potato consumption. Increased Cd levels were associated with type of lactation and tended to increase with tobacco smoking.

Conclusions

Surveillance for the presence of heavy metals in human milk is needed. Smoking and dietary habits are the main factors linked to heavy metal levels in breast milk. Our results reinforce the need to strengthen national food safety programs and to further promote avoidance of unhealthy behaviors such as smoking during pregnancy.     

Identification of new ozonation disinfection byproducts of 17β-estradiol and estrone in water

Estrogens are a class of micro-pollutants found in water at low concentrations (in the ng L⁻¹ range), but often sufficient to exert estrogenic effects due to their high estrogenic potency. Disinfection of waters containing estrogens through oxidative processes has been shown to lead to the formation of disinfection byproducts, which may also be estrogenic. The present work investigates the formation of disinfection byproducts of 17β-estradiol (E2) and estrone (E1) in the treatment of water with ozone. Experiments have been carried out at two different concentrations of the estrogens in ground water (100 ng L⁻¹ and 100 μg L⁻¹) and at varying ozone dosages (0-30 mg L⁻¹). Detection of the estrogens and their disinfection byproducts in the water samples has been performed by means of ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) with a triple quadrupole (QqQ) and a quadrupole-time of flight (QqTOF) instrument. Both E2 and E1 have been found to form two main byproducts, with molecular mass (MM) 288 and 278 in the case of E2, and 286 and 276 in the case of E1, following presumably the same reaction pathways. The E2 byproduct with MM 288 has been identified as 10epsilon-17beta-dihydroxy-1,4-estradieno-3-one (DEO), in agreement with previously published results. The molecular structures and the formation pathways of the other three newly identified byproducts have been suggested. These byproducts have been found to be formed at both high and low concentrations of the estrogens and to be persistent even after application of high ozone dosages.     

A comparison of two stomatal conductance models for ozone flux modelling using data from two Brassica species

In this study we tested and compared a multiplicative stomatal model and a coupled semi-empirical stomatal-photosynthesis model in their ability to predict stomatal conductance to ozone (g_st) using leaf-level data from oilseed rape (Brassica napus L.) and broccoli (Brassica oleracea L. var. italica Plenck). For oilseed rape, the multiplicative model and the coupled model were able to explain 72% and 73% of the observed g_st variance, respectively. For broccoli, the models were able to explain 53% and 51% of the observed g_st variance, respectively. These results support the coupled semi-empirical stomatal-photosynthesis model as a valid alternative to the multiplicative stomatal model for O₃ flux modelling, in terms of predictive performance.     

Aerosol trace metals,particle morphology and total gaseous mercury in the atmosphere of Oxford,UK

An investigation of atmospheric trace metals was conducted in Oxford, UK, a small city ～60 miles northwest of London, in 2007 and 2008. Concentrations of Sr, Mo, Cd, Pb, V, Cr, Mn, Fe, Co, Ni, Cu and Zn in aerosol were measured in bulk and size segregated samples. In addition, total gaseous mercury (TGM) concentrations were monitored semi-continuously by cold vapour-atomic fluorescence spectroscopy. Metal concentrations in Oxford were intermediate between previously reported levels of UK rural and urban areas for most metals studied and levels of Cd, Ni and Pb were within European guidelines. Metal concentrations appeared to be influenced by higher traffic volume on a timescale of hours. The influence of traffic on the aerosols was also suggested by the observation of carbonaceous particles via scanning electron microscopy (SEM). Air mass back trajectories suggest air masses arriving in Oxford from London and mainland Europe contained the highest metal concentrations. Aerosol samples collected over Bonfire Weekend, a period of intense firework use and lighting of bonfires in the UK, showed metal concentrations 6–46 times higher than at other times. Strontium, a tracer of firework release, was present at higher concentrations and showed a change in its size distribution from the coarse to fine mode over Bonfire Weekend. The presence of an abundance of spherical Sr particles was also confirmed in SEM images. The average TGM concentration in Oxford was 3.17 ng m^?3 (st. dev. 1.59) with values recorded between 1.32 and 23.2 ng m^?3. This is a higher average value than reported from nearby rural locations, although during periods when air was arriving from the west, similar concentrations to these rural areas were seen in Oxford. Comparison to meteorological data suggests that TGM in Oxford's air is highest when wind is arriving from the east/southeast. This may be due to emissions from London/mainland Europe with a possible contribution from emissions from a local crematorium situated 4 miles east of the sampling site. A diurnal pattern was also observed in the TGM data with a minimum concentration during the day when mercury may have been diluted by thermal mixing of the atmospheric boundary layer. Additionally, this diurnal pattern may reflect variations in a local source of TGM.