Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel

Residual stress profile in a component is often considered as the critical characteristic as it directly affects the fatigue life of a machined component. This work presents an analytical model for the prediction of residual stresses in orthogonal machining of AISI4340 steel. The novelty of the model lies in the physics-based approach focusing on the nature of contact stresses in various machining zones and the effect of machining temperature. The model incorporates: (i) stresses in three contact regions viz. shear, tool-nose-work piece and tool flank and machined surface, (ii) machining temperature, (iii) strain, strain rate and temperature dependent work material properties, (iv) plastic stresses evaluation by two algorithms, S-J and hybrid, (v) relaxation procedure and (iv) cutting conditions. The model benchmarking shows (86–88%) agreement between the experimental and predicted residual stresses in the X- and Y-directions. On the machined surface, the tensile residual stresses decrease with an increase the edge radius and increase with an increase the cutting speed. However, below the surface, the compressive residual stresses increase with an increase the depth of cut. Further, it is observed that the proposed model with hybrid algorithm gives better results at a lower feed rate, whereas with the S-J algorithm, at a higher feed rate.     

Statistical inferences from measured data on concentrations of naturally occurring radon,thoron, and decay products in Kumaun Himalayan belt

Environmental Science and Pollution Research - Regional averages of radon, thoron, and associated decay product concentration are reported to be higher than their respective global averages in...     

Herders’ Perceptions of and Responses to Climate Change in Northern Pakistan

Migratory pastoralism is an adaptation to a harsh and unstable environment, and pastoral herders have traditionally adapted to environmental and climatic change by building on their in-depth knowledge of this environment. In the Hindu Kush Himalayan region, and particularly in the arid and semiarid areas of northern Pakistan, pastoralism, the main livelihood, is vulnerable to climate change. Little detailed information is available about climate trends and impacts in remote mountain regions; herders’ perceptions of climate change can provide the information needed by policy makers to address problems and make decisions on adaptive strategies in high pastoral areas. A survey was conducted in Gilgit–Baltistan province of Pakistan to assess herders’ perceptions of, and adaptation strategies to climate change. Herders’ perceptions were gathered in individual interviews and focus group discussions. The herders perceived a change in climate over the past 10–15 years with longer and more intense droughts in summer, more frequent and heavier snowfall in winter, and prolonged summers and relatively shorter winters. These perceptions were validated by published scientific evidence. The herders considered that the change in climate had directly impacted pastures and then livestock by changing vegetation composition and reducing forage yield. They had adopted some adaptive strategies in response to the change such as altering the migration pattern and diversifying livelihoods. The findings show that the herder communities have practical lessons and indigenous knowledge related to rangeland management and adaptation to climate change that should be shared with the scientific community and integrated into development planning.     

A Life-Cycle Comparison of Alternative Automobile Fuels

ABSTRACT

We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C₂H₅OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C₂H₅OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results.

We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable, and reduce the demand for imported fuels. Fuels from food sources, such as biodiesel from soybeans and C₂H₅OH from corn, can be attractive only if the co-products are in high demand and if the fuel production does not diminish the food supply. C₂H₅OH from herbaceous or woody biomass could replace the gasoline burned in the light-duty fleet while supplying electricity as a co-product. While it costs more than gasoline, bioethanol would be attractive if the price of gasoline doubled, if significant reductions in GHG emissions were required, or if fuel economy regulations for gasoline vehicles were tightened.     

Modeling spatio-temporal change patterns of forest cover: a case study from the Himalayan foothills (India)

The present study used temporal remote sensing data for 1990, 2001 and 2006 to assess spatio-temporal patterns of forest cover changes in Shiwalik range of the Himalaya, Dehradun forest division. Forests are innately associated to human well-being. However, with the increasing anthropogenic activities, deforestation has increased. Quantitative change analysis of the forest cover for the past two decades provides valuable insight into the forest conservation vis-à-vis anthropogenic activities in the region. Spatio-temporal datasets along with biotic and abiotic variables provide opportunities to model the forest cover change further. The present study investigates forest cover change and predicts status of forest cover in the Dehradun forest division. Land Change Modeller (LCM) was used to predict status of forest cover for 2010 and 2015 using current disturbance scenarios. Comparing actual LULC of 2006 with the predicted LULC of 2006 validated change prediction model and agreement was 61.03%. The forested areas are getting degraded due to anthropogenic activities, but deforestation/degradation does not contribute much in expanding urban area. Agricultural areas and fallow lands are the main contributors to increased urban area. The study demonstrates the potential of geospatial tools to understand spatio-temporal forest cover change and generate the future scenarios.     

Molecular analysis of long-term biofilm formation on PVC and cast iron surfaces in drinking water distribution system

To understand the impacts of different plumbing materials on long-term biofilm formation in water supply system, we analyzed microbial community compositions in the bulk water and biofilms on faucets with two different materials-polyvinyl chloride （PVC） and cast iron, which have been frequently used for more thanlO years. Pyrosequencing was employed to describe both bacterial and eukaryotic microbial compositions. Bacterial communities in the bulk water and biofilm samples were significantly different from each other. Specific bacterial populations colonized on the surface of different materials. Hyphomicrobia and corrosion associated bacteria, such as Acidithiobacillus spp., Aquabacterium spp., Limnobacter thiooxidans, and Thiocapsa spp., were the most dominant bacteria identified in the PVC and cast iron biofilms, respectively, suggesting that bacterial colonization on the material surfaces was selective. Mycobacteria and Legionella spp. were common potential pathogenic bacteria occurred in the biofilm samples, but their abundance was different in the two biofilm bacterial communities. In contrast, the biofilm samples showed more similar eukaryotic communities than the bulk water. Notably, potential pathogenic fungi, i.e., Aspergillus spp. and Candida parapsilosis, occurred in similar abundance in both biofilms. These results indicated that microbial community, especially bacterial composition was remarkably affected by the different pipe materials （PVC and cast iron）.     

Capturing forest dependency in the central Himalayan region: Variations between Oak (<Emphasis Type="Italic">Quercus</Emphasis> spp.) and Pine (<Emphasis Type="Italic">Pinus</Emphasis> spp.) dominated forest landscapes

Our study explores the nexus between forests and local communities through participatory assessments and household surveys in the central Himalayan region. Forest dependency was compared among villages surrounded by oak-dominated forests (n = 8) and pine-dominated forests (n = 9). Both quantitative and qualitative analyses indicate variations in the degree of dependency based on proximity to nearest forest type. Households near oak-dominated forests were more dependent on forests (83.8%) compared to households near pine-dominated forests (69.1%). Forest dependency is mainly subsistence-oriented for meeting basic household requirements. Livestock population, cultivated land per household, and non-usage of alternative fuels are the major explanatory drivers of forest dependency. Our findings can help decision and policy makers to establish nested governance mechanisms encouraging prioritized site-specific conservation options among forest-adjacent households. Additionally, income diversification with respect to alternate livelihood sources, institutional reforms, and infrastructure facilities can reduce forest dependency, thereby, allowing sustainable forest management.     

Cold plasma technology: advanced and sustainable approach for wastewater treatment

Environmental Science and Pollution Research - Cold plasma has been a potent energy-efficient and eco-friendly advanced oxidation technology which has gained attention in recent decades as a...     

Ecosystem studies on upper region of Ganga River,India

A multi-disciplinary research programme on the Ganga River Ecosystem was launched by the Government of India in 1983 to collect information on its attributes. Monitoring of the initial 509 km unpolluted and unmonitored region of the river falling in partly mountainous and partly upper plain stretches for two years revealed good water quality. The Song River (a tributary) catchment, a victim of extensive mining activity in the past, was found to add maximum mineral load. The Bhagirathi River was found to carry maximum suspended solid load. Organic pollution was low throughout, occasionally showing seasonal and local peaks. The river exhibited a high oxidative state with pH falling in a slightly alkaline range and nutrient levels being very low.Diatoms formed a major part of the encountered genera of phytoplankton. Zooplankton were mainly represented by protozoans. Saprophytic bacteria underwent large spatial and temporal fluctuations. Coliforms exhibited an increasing trend with downstream river distance. The source of pollution could not be specifically characterized from an FC/FS ratio. Only one sample tested positive for enteric virus. The forms of benthic macroinvertebrates indicated a clean stream environment. It was observed that diversity indices, together with evenness and community comparison, could provide a promising approach to determine the state of the community.Eight heavy metals investigated, Cu, Zn, Fe, Cd, Mn, Pb, Ni and Co, were found to be present in the river water and bed sediments. The prominent mode of metal transport was found to be via the suspended load. The concentration of dissolved metals was found within WHO permissible limits. The heavy metal status of the Ganga River was compared with other rivers of the world. Sorptive properties of sediments were found to be similar to the general sorptive behaviour of the clays. Laboratory studies exhibited reasonable short t ₉₀ values for coliform survival in Ganga water. Faecal streptococcus survived longer.