Cu,Cr and As distribution in soils adjacent to pressure-treated decks,fences and poles

Chromated copper arsenate (CCA)-treated wood has been widely used in the Southeastern United States to protect wood products from microbial and fungal decay. The aims of this study were to (1). determine the distribution of arsenic (As), chromium (Cr), and copper (Cu), in soils surrounding CCA-treated wood structures such as decks, fences and poles; and (2). evaluate the impacts of these structures on As, Cr and Cu loading of the soils. Profile and lateral soil samples were collected under CCA-treated decks and adjacent to poles and fences. The results showed elevation of As, Cr and Cu concentrations close to and under the structures, with mean As concentrations as high as 23 mg x kg(-1) close to utility poles compared with less than 3 mg x kg (-1) at distances of about 1.5 m away. Concentrations of As, Cr, and Cu decreased with depth in areas close to CCA-treated poles. However, these results were only apparent in relatively new structures. A combination of weathering and leaching with time may have reduced the impact in older poles. Increased concentrations of As, Cu and Cr were also observed close to CCA-treated decks and fences, with age showing a similar impact. These results are helpful for CCA-treated wood product users to determine the safe use of these structures.     

Variables affecting emissions of PCDD/Fs from uncontrolled combustion of household waste in barrels

The uncontrolled burning of household waste in barrels has recently been implicated as a major source of airborne emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). A detailed, systematic study to understand the variables affecting emissions of PCDD/Fs from burn barrels was performed. The waste composition, fullness of the barrel, and the combustion conditions within the barrel all contribute significantly to determining the emissions of PCDD/Fs from burn barrels. The study found no statistically significant effect on emissions from the Cl content of waste except at high levels, which are not representative of typical household waste. At these elevated Cl concentrations, the impact of Cl on PCDD/F emissions was found to be independent of the form of the Cl (inorganic or organic). For typical burn conditions, most of the PCDD/F emissions appear to be associated with the later stages of the burn when the waste is smoldering. Polychlorinated biphenyls (PCBs) were also measured for a subset of the tests. For the nominal waste composition, the average emissions were 76.8 ng toxic equivalency units (TEQ)WHO98/kg of waste combusted, which suggests that uncontrolled burning of household waste could be a major source of airborne PCDD/Fs in the United States.     

Effects of fenoxycarb exposure on complete larval development of the xanthid crab,Rhithropanopeus harrisii

Pest control agents, such as juvenile hormone analogues (JHA), have been developed to limit effects on non-target organisms that co-inhabit insect pest habitats. Rhithropanopeus harrisii, an estuarine xanthid crab, was used to observe the impacts of the JHA, fenoxycarb, on the pattern of complete larval development as well as survival of larvae and successful metamorphosis to first crab stage. Significant mortality occurred in the first of four zoeal stages (after 2-3 days of exposure) at the highest treatment of 240 microg fenoxycarb/l and in megalopae exposed to 48 microg fenoxycarb/l. The time required to metamorphose to the first crab stage was significantly increased for megalopae in all treatments 48 microg/l. This delay in development was sufficient to significantly prolong the entire developmental period from zoea to crabs. Unexposed larvae developed to crabs in an average of 16 days; larvae exposed to >/=48 microg/l required 19-20 days. Reduced survival and extended duration of developing larval stages in the life history of a benthic invertebrate may alter the population dynamics of these organisms in the estuary.     

同步硝化反硝化生物脱氮技术研究

讨论了影响同步硝化反硝化反应的各参数,并进行了单因素实验与正交实验,获得了同步硝化反硝化生物脱氮工艺运行的最佳条件:DO浓度控制在0.5～2 mg/L,COD浓度为600～800mg/L,混合液悬浮固体(MLSS)为5000 mg/L,pH值在8.0左右,反应时间为6 h.在此条件下,氨氮及COD的去除率都较高,分别达85%和95%,总氮去除率为68 5%.     

造纸中段废水与生活污水合并深度处理工艺

采用水解酸化 CAST 混凝 复合滤池与水解酸化 接触氧化 混凝 复合滤池2种组合工艺对造纸中段废水与生活污水进行合并处理对照试验.结果表明,两种工艺都是切实可行的,二级出水均可达到<污水综合排放标准>(GB8978-1996)二级标准,深度处理出水可达中水水质要求.其中以水解酸化 CAST 混凝 复合滤池组合工艺效果最好.     

Biochar as low-cost sorbent of volatile fuel organic compounds: potential application to water remediation

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (>?400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

     

Microplastic distribution in surface sediments along the Spanish Mediterranean continental shelf

Environmental Science and Pollution Research - Microplastics (MPs) are widely recognised as a contaminant of emerging concern in the marine environment. This work provides original data of the...     

Does the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator change the toxic potential of particles?

Inhalation exposure to urban air particles is known to increase morbidity in humans and animals. Our group utilizes the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator (HAPC) to generate concentrated aerosols of outdoor air particles for experimental exposures. We have reported increased pathologic responses to inhalation of concentrated urban air particles and identified silicon (as silicate) as an element associated with many of these responses. Using silicate-rich Mt. St. Helen's volcanic ash (MSHA), we exposed three groups of Sprague-Dawley rats by inhalation for 6 hr to filtered air, MSHA, or MSHA passed though the HAPC. Twenty-four hours following exposure, bronchoalveolar lavage was performed to assess total cell count, differential cell count, protein, lactate dehydrogenase, and n-beta-glucosaminidase levels. Peripheral blood was examined for packed cell volume, total protein, total white cells, and differential cell count. Morphologic studies localized particles in the lung and assessed pulmonary vasculature. No significant differences were observed among any of the groups in any parameter measured including morphometric analysis of pulmonary vasoconstriction. Scanning electron microscopy and X-ray analysis identified particles as silicates typical of MSHA throughout the lung. These findings suggest that particles passing through the HAPC have no change in their toxic potential in an exposure setting where particle deposition in the lung has occurred.     

Local-scale fluxes of carbon dioxide in urban environments: methodological challenges and results from Chicago

Much attention is being directed to the measurement and modeling of surface-atmosphere exchanges of CO2 for different surface types. However, as yet, few measurements have been conducted in cities, even though these environments are widely acknowledged to be major sources of anthropogenic CO2. This paper highlights some of the challenges facing micrometeorologists attempting to use eddy covariance techniques to directly monitor CO2 fluxes in urban environments, focusing on the inherent variability within and between urban areas, and the importance of scale and the appropriate height of measurements. Results from a very short-term study of CO2 fluxes, undertaken in Chicago, Illinois in the summer of 1995, are presented. Mid-afternoon minimum CO2 concentrations and negative fluxes are attributed to the strength of biospheric photosynthesis and strong mixing of local anthropogenic sources in a deep mixed layer. Poor night-time atmospheric mixing, lower mixed layer depths, biospheric respiration, and continued missions from mobile and fixed anthropogenic sources, account for the night-time maxima in CO2 concentrations. The need for more, longer-term, continuous eddy covariance measurements is stressed.     

Insights into aqueous carbofuran removal by modified and non-modified rice husk biochars

Biochar has been considered as a potential sorbent for removal of frequently detected pesticides in water. In the present study, modified and non-modified rice husk biochars were used for aqueous carbofuran removal. Rice husk biochars were produced at 300, 500, and 700 °C in slow pyrolysis and further exposed to steam activation. Biochars were physicochemically characterized using proximate, ultimate, FTIR methods and used to examine equilibrium and dynamic adsorption of carbofuran. Increasing pyrolysis temperature led to a decrease of biochar yield and increase of porosity, surface area, and adsorption capacities which were further enhanced by steam activation. Carbofuran adsorption was pH-dependant, and the maximum (161 mg g^?1) occurred in the vicinity of pH 5, on steam-activated biochar produced at 700 °C. Freundlich model best fitted the sorption equilibrium data. Both chemisorption and physisorption interactions on heterogeneous adsorbent surface may involve in carbofuran adsorption. Langmuir kinetics could be applied to describe carbofuran adsorption in a fixed bed. A higher carbofuran volume was treated in a column bed by a steam-activated biochar versus non-activated biochars. Overall, steam-activated rice husk biochar can be highlighted as a promising low-cost sustainable material for aqueous carbofuran removal.