The importance of heterozygosity in a frog’s life

High genetic variability may increase metabolic efficiency and thus allows responding to environmental challenges as limits to adaptation are approached. Therefore, it has been suggested that high genetic variability contributes strongly to the fitness of an individual. Survival to high age may thus depend on high genetic variability, and genetically variable individuals may have a higher survival rate to high ages in comparison to less variable sympatric conspecifics. Such a heterozygosity × age relationship might be more readily detectable in stressful as compared to benign environments. For testing the relationship between age and heterozygosity, we genetically analyzed 71 individuals of the frog species Rana perezi from a total of seven populations at 13 allozyme loci. The age of the individuals was determined by skeletochronology. We found effects on age of both environment and allozyme heterozygosity, especially in populations with high stress regimes. A significant heterozygosity × age relationship has so far rarely been shown in natural populations. The result of our analysis suggests that more heterozygous individuals have a higher longevity and may be an important source of genetic variability of a population, likely contributing to a stabilization of the effective population size.     

Improved oxidative stability of biodiesel via alternative processing methods using cottonseed oil

Biodiesel from waste cooking oil (WCO) requires antioxidants to meet oxidation stability specifications set forth in ASTM D6751 or EN 14214. In contrast, unrefined cottonseed oil (CSO), containing tocopherols and gossypol, produces biodiesel of higher oxidation stability. However, only a portion of these CSO endogenous antioxidants are suspected to be retained in biodiesel. Because the economics of biodiesel manufacturing rely upon inexpensive sources of triglycerides, emphasis was placed on developing improved alternative processing methods where WCO was the main source of methyl esters (WCOME) and CSO was used as a supplemental source of triglycerides and antioxidants in a 4:1 ratio. This study compared four processing methods for their ability to produce biodiesel of increased oxidative stability prepared from a 4:1 ratio of WCO:CSO. Two novel processing methods developed for this study utilise solvent properties of fatty acid methyl esters and glycerol to avoid additional chemical inventory for biodiesel processors. This study concludes that the two new processing methods resulted in biodiesel that had statistically significant improved oxidation stability when compared to two common industrial processing methods. Another significant finding is that high-shear homogenisation during transesterification reduced reaction time from the published one hour to 16 minutes.     

The Brazilian National Intercomparison Program (PNI/IRD/CNEN): evaluation of 15 years of data

The Instituto de Radioprote??o e Dosimetria has been coordinating the National Intercomparison Program (PNI) for 15 years, from 1991 to 2005. The objective is to evaluate the analytical performance of the laboratories in low-level activity concentration radionuclide assays in environmental samples. This work presents an evaluation of PNI data from 42 intercomparison runs, which distributed to 22 Brazilian laboratories 2511 samples evaluating 5768 radionuclide assays involving 32 radionuclides in the period from 1991 to 2004. The laboratory performance was evaluated using the Normalized Standard Deviation used by the U.S. EPA. For comparison aims, the Normalized Deviation, used by BIPM was also applied. Laboratory performance were grouped and evaluated in three periods of 5 years each. The first period shows, an average value of good performance of 71.2%, the second shows an average of 78.6% and the last an average of 82.3%. Performance for each kind of radionuclide is also presented.     

Agro-environmental sustainability assessment using multicriteria decision analysis and system analysis

Transparency and reproducibility remain challenges for sustainability assessment, particularly in developing world contexts where formal scientific information is often limited. We posit that even in such contexts, sustainability assessment can be productive and informative if the underlying assumptions about sustainability are made transparent. Thus, the process of assessment can be as instructive as the results, if not more so. In this article, we describe and discuss how we combined multicriteria decision analysis and system analysis as a unified approach to sustainability assessment. This approach is transparent, practical, flexible, and reproducible; it also facilitates the development of recommendations for enhancing sustainability. We illustrate the approach with examples from a recent environmental sustainability assessment of irrigated commercial maize production in Sinaloa, Mexico.     

Source, concentration, and distribution of elemental mercury in the atmosphere in Toronto, Canada

Atmospheric gaseous elemental mercury [GEM] at 1.8, 4, and 59 m above ground, in parking lots, and in indoor and outdoor air was measured in Toronto City, Canada from May 2008-July 2009. The average GEM value at 1.8 m was 1.89 ± 0.62 ng m(-3). The GEM values increased with elevation. The average GEM in underground parking lots ranged from 1.37 to 7.86 ng m(-3) and was higher than those observed from the surface parking lots. The GEM in the indoor air ranged from 1.21 to 28.50 ng m(-3), was higher in the laboratories than in the offices, and was much higher than that in the outdoor air. All these indicate that buildings serve as sources of mercury to the urban atmosphere. More studies are needed to estimate the contribution of urban areas to the atmospheric mercury budget and the impact of indoor air on outdoor air quality and human health.     

Particulate matter emissions of different brands of mentholated cigarettes

Inhaling particulate matter (PM) in environmental tobacco smoke (ETS) endangers the health of nonsmokers. Menthol, an additive in cigarettes, attenuates respiratory irritation of tobacco smoke. It reduces perceptibility of smoke and therefore passive smokers may inhale ETS unnoticed. To investigate a possible effect of menthol on PM concentrations (PM₁₀, PM_2.5, and PM₁), ETS of four mentholated cigarette brands (Elixyr Menthol, Winston Menthol, Reyno Classic, and Pall Mall Menthol Blast) with varying menthol content was analyzed. ETS was generated in a standardized way using an automatic environmental tobacco smoke emitter (AETSE), followed by laser aerosol spectrometry. This analysis shows that the tested cigarette brands, despite having different menthol concentrations, do not show differences with regard to PM emissions, with the exception of Reyno Classic, which shows an increased emission, although the menthol level ranged in the midfield. More than 90% of the emitted particles had a size smaller than or equal to 1 µm. Regardless of the menthol level, the count median diameter (CMD) and the mass median diameter (MMD) were found to be 0.3 µm and 0.5 µm, respectively. These results point out that there is no effect of menthol on PM emission and that other additives might influence the increased PM emission of Reyno Classic.

Implications: Particulate matter (PM) in ETS endangers the health of nonsmokers and smokers. This study considers the effect of menthol, an additive in cigarettes, on PM emissions. Does menthol increase the amount of PM? Due to the exposure to secondhand smoke nearly 900,000 people die each year worldwide. The aim of the study is to measure the particle concentration (L^?1), mass concentration (µg m^?3), and dust mass fractions shown as PM₁₀, PM_2.5, and PM₁ of five different cigarette brands, including four with different menthol concentrations and one menthol-free reference cigarette, in a well-established standardized system.     

Multivariant statistical analysis of PCDD/FS in sewage sludges from different areas of the Valencian Community (Spain)

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in 31 sewage sludges from different wastewater treatment plants corresponding to rural, urban and industrial areas in the Valencian Community (Spain) were analysed. Values of 5.1-346.2 ng I-TEQ kg(-1) (dry weight) were detected for sewage sludge with the highest value in one sample from an industrial area. Therefore the majority of the samples did not exceed the limit proposed (100 ng I-TEQ kg(-1)) by the [EU, 2000. Working document on sludge, 3rd draft. Brussels. Available from: http://europa.eu.int/comm/environment/waste/sludge/sludge_en.pdf] for use in agriculture. The dominant congeners for each family of compounds were 1,2,3,4,6,7,8-HpCDD and OCDD from PCDDs, and 1,2,3,4,6,7,8-HpCDF and OCDF from PCDFs. The total concentrations of PCDD/Fs were evaluated statistically through SPPS 11.0 for Windows. The principal component analysis (PCA) was used to extract two PCs as a linear combination of the original variables, one of them associated to urban+highly industrial areas and the other one to urban+low industrial areas. The linear regression method was applied and an efficient correlation was obtained between the total I-TEQ values for each sample and two of most abundant congeners (OCDF and OCDD). This expression was obtained with the results of the 31 samples analysed and a variety of data from other authors. Furthermore, several bilateral correlations between the different congeners completed the statistical analysis.     

Long-term biosolids application effects on metal concentrations in soil and bermudagrass forage

The long-term application of biosolids that periodically contained elevated metal concentrations has raised questions about potential effects on animal health. To address these concerns, we determined metal concentrations (As, Cd, Cu, Pb, Hg, Mo, Ni, Se, and Zn) in both soil and bermudagrass [Cynodon dactylon (L.) Pers.] forage from 10 fields in the following categories of biosolids application: six or more years (>6YR), less than six years (<6YR), and no applications (NS). Soil metal concentrations in all groups were similar to values reported for mineral soils in Georgia, and well below USEPA cumulative limits. Average metal concentrations in the forage were below the maximum tolerable level (MTL) for beef cattle, although two biosolids-amended fields in the >6YR group produced forage that was at or near the MTL for Cd and Mo, and one field in the <6YR group produced forage above the MTL for Cd. The Cu to Mo ratios in forage decreased with increasing time of sludge application, with the average in the >6YR group at a proposed 5:1 Cu to Mo ratio limit to protect ruminant health. Sulfur concentrations in the forage from all three groups was near the MTL of 4 g kg(-1). The study indicated that toxic levels of metals have not accumulated in the soils due to long-term biosolids application. Overall forage quality from the biosolids-amended fields was similar to that of commercially fertilized fields; however, due to the relatively high S and potential for a low Cu to Mo ratio, Cu supplements should be used to ensure ruminant health.