Prevention of musculoskeletal complaints in nursing: Aims, approach and content of an ergonomic-educational programme

In 1992 a comprehensive health-promotion project was initiated in seven nursing-homes in the Netherlands. This project was designed to implement an ergonomic-educational programme, with the intention of reducing physical workload and to bring about safe working in order to prevent work-related musculoskeletal complaints. After a period of external support, employees of the nursing-homes should be able to proceed with the programme independently. In this paper the content of the programme and its underlying strategies and theories are described. So far, the programme has got off to a good start in all the nursing-homes. Positive effects of the programme could be demonstrated and guidelines and protocols for safe working were introduced. However, it is as yet too early for definitive conclusions to be drawn regarding the aspect of continuity.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Emerging technologies for in-situ groundwater remediation

There are numerous technologies currently being tested by EPA, universities throughout the world, and private research organizations. A few of the more promising innovative technologies as well as fully tested and proven remedies for treating contaminated groundwater are presented in this article. Although several of those technologies have been in existence for only four to five years, the results of full-scale testing are being produced. The method for each of these promising technologies is described, results from recent field-scale studies are summarized, and a discussion of cost is presented.     

Getting the ‘pulse’ of your employees: the use of cardiovascular research in better understanding behavior in organizations

Cardiovascular disease has severe consequences for both individual betterment and organizational health. Yet, organization‐based cardiovascular research remains quite limited. This commentary addresses this void by integrating research dating from the famous Hawthorne experiments with current medical science. It then suggests future organizational research on cardiovascular health and recommends use of specific composite cardiovascular measures to advance our understanding of the organizational implications of cardiovascular disease. Copyright © 2006 John Wiley & Sons, Ltd.     

Locus of control at work: a meta‐analysis

This study meta‐analyzed the relationships between locus of control (LOC) and a wide range of work outcomes. We categorized these outcomes according to three theoretical perspectives: LOC and well‐being, LOC and motivation, and LOC and behavioral orientation. Hypotheses reflecting these three perspectives were proposed and tested. It was found that internal locus was positively associated with favorable work outcomes, such as positive task and social experiences, and greater job motivation. Our findings are discussed in relation to research on core self‐evaluation and the Big Five personality traits. Copyright © 2006 John Wiley & Sons, Ltd.     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.     

Differences and similarities of gas and dust explosions: A critical evaluation of the European ‘ATEX’ directives in relation to dusts

Explosive gas mixtures and explosive dust clouds, once existing, exhibit similar ignition and combustion features. However, there are two basic differences between dusts and gases which are of substantially greater significance in design of safety standards than these similarities. Firstly, the physics of generation and up-keeping of dust clouds and premixed gas/vapour clouds are substantially different. This means that in most situations where accidental explosive gas clouds may be produced quite readily, generation of explosive dust clouds would be highly unlikely. Secondly, contrary to premixed gas flame propagation, the propagation of flames in dust/air mixtures is not limited only to the flammable dust concentration range of dynamic clouds. The state of stagnant layers/deposits offers an additional discrete possibility of flame propagation.

The two European Directives 94/9/EC (1994) and 1999/92/EC (1999) primarily address gases/vapours, whereas the particular properties of dusts are not addressed adequately. Some recent IEC and European dust standards resulting from this deficiency are discussed, and the need for revising the two directives accordingly is emphasized.     

Off-site emergency scenario, a case study from a LPG Bottling Plant

After Bhopal disaster, emergency planning in an industrial area has become inevitable. The off-site emergency plan is an integral part of any major hazard control system. Boiling Liquid Expanding Vapour Explosion (BLEVE) leads to fatal consequences. This paper highlights some salient features of the emergency scenario, which ultimately leads to fireball with enormous pressure wave all around.     

Considerations for Manufacturing Bio-Based Plastic Products

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that contain biomaterials. These include the selection of materials, the selection of manufacturing processes, manufacturing costs, and the quality of final products. Additionally, several standard methods that are commonly used for the determination of mechanical and physical properties are compiled; thus this paper should be a useful resource for both educators and researchers. The trends discussed here and their implications are critical for those involved in manufacturing, because contrary to conventional wisdom, simultaneously meeting the material production needs of our society, as well as that of the environment are not mutually-exclusive.     

The New Jersey Toxics Reduction Workplan for Ny-Nj Harbor: Distribution of Pcdd/Fs in Ambient Waters

As part of the NJ Toxics Reduction Workplan for NY-NJ Harbor, ambient water samples were collected at fifteen locations along the tidal portions of the Hackensack, Passaic, Raritan, Rahway and Elizabeth Rivers, and in Newark Bay, the Arthur Kill, and Kill van Kull. A Trace Organics Platform Sampler was used to collect a total of 75 suspended sediment phase samples between June 2000 and May 2002. These samples were analyzed for spatial and wet vs. dry weather trends in the 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs; modified USEPA Method 1613b). Mean total PCDD/F (tPCDD/F) concentrations at the sampling locations ranged between 3.8 and 41.5 ng/g. On average, OCDD accounted for almost 80% of the tPCDD/F concentrations; mean total [PCDD/F – OCDD] concentrations ranged between 0.84 and 5.20 ng/g at the sampling locations. Mean 2,3,7,8-TCDD concentrations ranged between 0.003 and 0.28 ng/g, with the highest concentrations (> 0.10 ng/g) along the tidal Passaic and lower Hackensack Rivers, and in upper Newark Bay. Mean tPCDD/F Toxic Equivalency Quotients (TEQ) ranged between 45 and 344 TEQ pg/g, with the highest levels found in the lower Passaic River. Toxicity was primarily driven by 2,3,7,8-TCDD concentrations in the Passaic and Hackensack Rivers, and in Newark Bay. Examples of congener distribution patterns at some of the sampling locations are also presented.