Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.     

Visitor-induced changes in the chemical composition of soils in backcountry areas of Mt Robson Provincial Park, British Columbia, Canada

Balancing recreation and conservation is an important issue in Canada's parks and protected areas. Increased levels of visitation to parks, especially to backcountry areas, create undue pressure on natural resources, resulting in a variety of ecological impacts. This paper illustrates the issue of visitor-induced changes on the chemical composition of soils in Mt Robson Provincial Park, British Columbia. Soil samples were collected from dish wash stations and fire pits (disturbed sites) at seven campgrounds located along two popular backcountry trails, and were compared to samples obtained from adjacent undisturbed control sites. Analysis of soil samples suggest that the lower amounts of aluminum, potassium, magnesium and sodium in many of the 'disturbed' samples can be related to intense leaching in dish wash stations, and can be attributed to frequent disposal of waste water from washing and cooking activities. Soils in wash stations generally had higher phosphorus, copper and zinc contents as compared to controls. Soils in fire pits were elevated in copper, relative to controls. Results of this study support park regulations that waste water disposal and camp fires be restricted to designated areas. Informing the public of scientific studies helps them understand the consequences of their activities; this may help persuade them to observe park rules and regulations.     

Decision making under uncertainty in case of soil remediation

Decisions on soil remediation are one of the most difficult management issues of municipal and state agencies. The assessment of contamination is uncertain, the costs of remediation are high, and the impacts on the environment are multiple. This paper presents a general, transparent, and consistent method for decision making among the remediation alternatives. Soil washing, phytoremediation, and no remediation are exemplarily considered. Multi-criteria utility functions including (a) the cost of remediation (b) the impact on human health and agricultural productivity, and (c) the economic gain after remediation are constructed using probability density functions representing contamination for all site coordinates. Herewith, the probability of different types of (i) correct decisions such as a hit or a true rejection and (ii) erroneous decisions such as a false alarm or miss are examined. The decision theoretic model is applied to a case study on heavy metal contaminated soil. This case study reveals the non-linear structure of multi-criteria-decision making. The case study shows that the geostatistical uncertainties of the log-normal distributed soil contamination must be taken into account: When uncertainties are not considered and the utilities are assessed according to the estimated value for a spatial unit, only few (N=26) spatial units result where the utility score of the alternative soil washing are higher than the utility score to the no remediation alternative. However, when taking into account geostatistical uncertainties of the log-normal soil distribution this number is about ten times greater (N=237). Furthermore, the use of 'maximizing expected utility' as decision rule is critical in that it may lead to a high probability of misses.     

Effects of calibration on L-THIA GIS runoff and pollutant estimation

Urbanization can result in alteration of a watershed's hydrologic response and water quality. To simulate hydrologic and water quality impacts of land use changes, the Long-Term Hydrologic Impact Assessment (L-THIA) system has been used. The L-THIA system estimates pollutant loading based on direct runoff quantity and land use based pollutant coefficients. The accurate estimation of direct runoff is important in assessing water quality impacts of land use changes. An automated program was developed to calibrate the L-THIA model using the millions of curve number (CN) combinations associated with land uses and hydrologic soil groups. L-THIA calibration for the Little Eagle Creek (LEC) watershed near Indianapolis, Indiana was performed using land use data for 1991 and daily rainfall data for six months of 1991 (January 1-June 30) to minimize errors associated with use of different temporal land use data and rainfall data. For the calibration period, the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The calibrated CN values were used for validation of the model for the same year (July 1-December 31), and the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The Nash-Sutcliffe coefficient was 0.52 for January 1, 1991 to December 31, 1991 using uncalibrated CN values. As shown in this study, the use of better input parameters for the L-THIA model can improve accuracy. The effects on direct runoff and pollutant estimation of the calibrated CN values in the L-THIA model were investigated for the LEC. Following calibration, the estimated average annual direct runoff for the LEC watershed increased by 34%, total nitrogen by 24%, total phosphorus by 22%, and total lead by 43%. This study demonstrates that the L-THIA model should be calibrated and validated prior to application in a particular watershed to more accurately assess the effects of land use changes on hydrology and water quality.     

Recycling of an industrial sludge and marine clay as light-weight aggregates

The geographical limitations of Singapore, its restricted natural resources and voluminous municipal and industrial waste streams, make environmental management a major challenge for the island state. In an attempt to find ways to reduce importation of raw materials and the waste sent to landfill, light weight aggregates were produced from marine clay and a CaF(2)-rich semiconductor industry sludge. Aggregates were produced in a bench-scale rotary kiln with three clay/sludge loadings (90/10, 70/30 and 50/50%). All three mixtures showed good bloating behavior during firing and the ceramic pellets (1-1.5cm diameter) had densities well below that required for light-weight aggregates. In the initial tests, the pore sizes of the aggregates were in general too large resulting in high water absorption. Comparisons between the composition of the two waste products and the aggregates showed a significant loss of fluorine (40-60%) during processing; a problem which may require flue gas treatment. Leach testing showed that the formed aggregates would not pose a human or environmental hazard in terms of fluorine mobilization.     

Modelling the Distribution and Quality of Sand and Gravel Resources in 3D: a Case Study in the Thames Basin,UK

Three-dimensional (3D) models are often utilised to assess the presence of sand and gravel deposits. Expanding these models to provide a better indication of the suitability of the deposit as aggregate for use in construction would be advantageous. This, however, leads to statistical challenges. To be effective, models must be able to reflect the interdependencies between different criteria (e.g. depth to deposit, thickness of deposit, ratio of mineral to waste, proportion of ‘fines’) as well as the inherent uncertainty introduced because models are derived from a limited set of boreholes in a study region. Using legacy borehole data collected during a systematic survey of sand and gravel deposits in the UK, we have developed a 3D model for a 2400 km² region close to Reading, southern England. In developing the model, we have reassessed the borehole grading data to reflect modern extraction criteria and explored the most suitable statistical modelling technique. The additive log-ratio transform and the linear model of coregionalization have been applied, techniques that have been previously used to map soil texture classes in two dimensions, to assess the quality of sand and gravel deposits in the area. The application of these statistical techniques leads to a model which can be used to generate thousands of plausible realisations of the deposit which fully reflect the extent of model uncertainty. The approach offers potential to improve regional-scale mineral planning by providing an enhanced understanding of sand and gravel deposits and the extent to which they meet current extraction criteria.

     

Temporal and Spatial Variations of Phytoplankton Community Structure in Lake Erhai,a Chinese Plateau Lake,with Reference to Environmental Factors

Russian Journal of Ecology - Temporal and spatial variations of phytoplankton community in Lake Erhai were investigated from May 2010 to April 2011. A total of 124 species belonging to 8 phyla and...     

Chemical contamination of the East River (Dongjiang) and its implication on sustainable development in the Pearl River Delta

A recent survey reveals that water quality and river sediments of Dongjiang (the East River) have been mildly contaminated by heavy metals and organic chemicals, such as copper, lead, PCBs, PAHs and HCHs. According to photogrammertic surveys, the sources of contamination are closely related to human activities, such as domestic and industrial discharges, agricultural chemical applications and soil erosion due to deforestation. The level of water and sediment contamination is most serious at the mid-river section near the urban of Weizhou. Due to natural dilution and diffusion, the levels of contamination are slightly decreased at the medium low section of the River near Qiaotou and Matan. Nevertheless, the levels of contamination increase again in the lower river section near Shenzhen, which is a highly developed economic zone. Since Dongjiang is the major source of potable water supply for Hong Kong (nearly 80% of potable water of Hong Kong is abstracted from Dongjiang) and the other parts of the Pearl River Delta (PRD), such organic and inorganic pollution merit concern. Ironically, most of the industrial and commercial activities in the watershed of Dongjiang are business investments of Hong Kong citizens. Cross-border environmental efforts should be enhanced with collaboration of different jurisdictions to achieve targets of regional sustainability.     

Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Polybrominated diphenyl ether in the East Asian environment: a critical review

Polybrominated diphenyl ethers (PBDEs) have been extensively used as flame retardants in consumer goods. Sufficient evidence shows that PBDEs have been rapidly accumulating in the environment worldwide. In Asia, deca-bromodiphenyl ether has been produced and used in large quantities, while penta-BDE has largely ceased in the mid-1990s. This paper summarizes and critically reviews the status of PBDE pollution in East Asia, with emphases on the comparisons with Europe and North America and the interpretation of the differences. In general, the concentrations of PBDEs in atmosphere, sludge, human and biological samples of East Asia are comparable to or lower than those in Europe and North America. However, in the sediments of waters near densely populated and heavily industrialized areas, PBDE levels are among the highest ever reported in the literature. In Japan and China, concentrations of PBDEs in sediment cores showed an increasing trend for the past 20-30 years. Also, PBDEs levels in human breast milk in Japan increased about 10-fold in the past 20 years. The presence of PBDEs in fur seal has increased about 150-fold in 1994 than that in 1972. Regional and inter-continental transport cannot be confirmed due to insufficient information. However, the detection of a number of PBDE congeners in a pristine lake on the Qinghai-Tibet Plateau may be an evidence of their long-range transport.