Characterizing spatial structure of sediment E. coli populations to inform sampling design

Escherichia coli can persist in streambed sediments and influence water quality monitoring programs through their resuspension into overlying waters. This study examined the spatial patterns in E. coli concentration and population structure within streambed morphological features during baseflow and following stormflow to inform sampling strategies for representative characterization of E. coli populations within a stream reach. E. coli concentrations in bed sediments were significantly different (p?=?0.002) among monitoring sites during baseflow, and significant interactive effects (p?=?0.002) occurred among monitoring sites and morphological features following stormflow. Least absolute shrinkage and selection operator (LASSO) regression revealed that water velocity and effective particle size (D ₁₀) explained E. coli concentration during baseflow, whereas sediment organic carbon, water velocity and median particle diameter (D ₅₀) were important explanatory variables following stormflow. Principle Coordinate Analysis illustrated the site-scale differences in sediment E. coli populations between disconnected stream segments. Also, E. coli populations were similar among depositional features within a reach, but differed in relation to high velocity features (e.g., riffles). Canonical correspondence analysis resolved that E. coli population structure was primarily explained by spatial (26.9–31.7 %) over environmental variables (9.2–13.1 %). Spatial autocorrelation existed among monitoring sites and morphological features for both sampling events, and gradients in mean particle diameter and water velocity influenced E. coli population structure for the baseflow and stormflow sampling events, respectively. Representative characterization of streambed E. coli requires sampling of depositional and high velocity environments to accommodate strain selectivity among these features owing to sediment and water velocity heterogeneity.     

Integrated Modular Modeling of Water and Nutrients From Point and Nonpoint Sources in the Patuxent River Watershed1

Abstract: We present a simple modular landscape simulation model that is based on a watershed modeling framework in which different sets of processes occurring in a watershed can be simulated separately with different models. The model consists of three loosely coupled submodels: a rainfall‐runoff model (TOPMODEL) for runoff generation in a subwatershed, a nutrient model for estimation of nutrients from nonpoint sources in a subwatershed, and a stream network model for integration of point and nonpoint sources in the routing process. The model performance was evaluated using monitoring data in the watershed of the Patuxent River, a tributary to the Chesapeake Bay in Maryland, from July 1997 through August 1999. Despite its simplicity, the landscape model predictions of streamflow, and sediment and nutrient loads were as good as or better than those of the Hydrological Simulation Program‐Fortran model, one of the most widely used comprehensive watershed models. The landscape model was applied to predict discharges of water, sediment, silicate, organic carbon, nitrate, ammonium, organic nitrogen, total nitrogen, organic phosphorus, phosphate, and total phosphorus from the Patuxent watershed to its estuary. The predicted annual water discharge to the estuary was very close to the measured annual total in terms of percent errors for both years of the study period (≤2%). The model predictions for loads of nutrients were also good (20‐30%) or very good (<20%) with exceptions of sediment (40%), phosphate (36%), and organic carbon (53%) for Year 1.     

Empirical models based on the universal soil loss equation fail to predict sediment discharges from Chesapeake Bay catchments

The Universal Soil Loss Equation (USLE) and its derivatives are widely used for identifying watersheds with a high potential for degrading stream water quality. We compared sediment yields estimated from regional application of the USLE, the automated revised RUSLE2, and five sediment delivery ratio algorithms to measured annual average sediment delivery in 78 catchments of the Chesapeake Bay watershed. We did the same comparisons for another 23 catchments monitored by the USGS. Predictions exceeded observed sediment yields by more than 100% and were highly correlated with USLE erosion predictions (Pearson r range, 0.73-0.92; p < 0.001). RUSLE2-erosion estimates were highly correlated with USLE estimates (r = 0.87; p < 001), so the method of implementing the USLE model did not change the results. In ranked comparisons between observed and predicted sediment yields, the models failed to identify catchments with higher yields (r range, -0.28-0.00; p > 0.14). In a multiple regression analysis, soil erodibility, log (stream flow), basin shape (topographic relief ratio), the square-root transformed proportion of forest, and occurrence in the Appalachian Plateau province explained 55% of the observed variance in measured suspended sediment loads, but the model performed poorly (r(2) = 0.06) at predicting loads in the 23 USGS watersheds not used in fitting the model. The use of USLE or multiple regression models to predict sediment yields is not advisable despite their present widespread application. Integrated watershed models based on the USLE may also be unsuitable for making management decisions.     

Effects of the pharmaceuticals gemfibrozil and diclofenac on biomarker expression in the zebra mussel (Dreissena polymorpha) and their comparison with standardised toxicity tests

Pharmaceuticals, including the lipid regulator gemfibrozil and the non-steroidal anti-inflammatory drug diclofenac have been identified in waste water treatment plant effluents and receiving waters throughout the western world. The acute and chronic toxicity of these compounds was assessed for three freshwater species (Daphnia magna,Pseudokirchneriella subcapitata, Lemna minor) using standardised toxicity tests with toxicity found in the non-environmentally relevant mid mg L⁻¹ concentration range. For the acute endpoints (IC₅₀ and EC₅₀) gemfibrozil showed higher toxicity ranging from 29 to 59 mg L⁻¹ (diclofenac 47-67 mg L⁻¹), while diclofenac was more toxic for the chronic D. magna 21 d endpoints ranging from 10 to 56 mg L⁻¹ (gemfibrozil 32-100 mg L⁻¹). These results were compared with the expression of several biomarkers in the zebra mussel (Dreissena polymorpha) 24 and 96 h after exposure by injection to concentrations of 21 and 21,000 μg L⁻¹ corresponding to nominal concentrations of 1 and 1000 μg L⁻¹. Exposure to gemfibrozil and diclofenac at both concentrations significantly increased the level of lipid peroxidation, a biomarker of damage. At the elevated nominal concentration of 1000 μg L⁻¹ the biomarkers of defence glutathione transferase and metallothionein were significantly elevated for gemfibrozil and diclofenac respectively, as was DNA damage after 96 h exposure to gemfibrozil. No evidence of endocrine disruption was observed using the alkali-labile phosphate technique. Results from this suite of biomarkers indicate these compounds can cause significant stress at environmentally relevant concentrations acting primarily through oxidation pathways with significant destabilization of the lysosomal membrane and that biomarker expression is a more sensitive endpoint than standardised toxicity tests.     

Emission factors for high-emitting vehicles based on on-road measurements of individual vehicle exhaust with a mobile measurement platform

Fuel-based emission factors for 143 light-duty gasoline vehicles (LDGVs) and 93 heavy-duty diesel trucks (HDDTs) were measured in Wilmington, CA using a zero-emission mobile measurement platform (MMP). The frequency distributions of emission factors of carbon monoxide (CO), nitrogen oxides (NO(x)), and particle mass with aerodynamic diameter below 2.5 microm (PM2.5) varied widely, whereas the average of the individual vehicle emission factors were comparable to those reported in previous tunnel and remote sensing studies as well as the predictions by Emission Factors (EMFAC) 2007 mobile source emission model for Los Angeles County. Variation in emissions due to different driving modes (idle, low- and high-speed acceleration, low- and high-speed cruise) was found to be relatively small in comparison to intervehicle variability and did not appear to interfere with the identification of high emitters, defined as the vehicles whose emissions were more than 5 times the fleet-average values. Using this definition, approximately 5% of the LDGVs and HDDTs measured were high emitters. Among the 143 LDGVs, the average emission factors of NO(x), black carbon (BC), PM2.5, and ultrafine particle (UFP) would be reduced by 34%, 39%, 44%, and 31%, respectively, by removing the highest 5% of emitting vehicles, whereas CO emission factor would be reduced by 50%. The emission distributions of the 93 HDDTs measured were even more skewed: approximately half of the NO(x) and CO fleet-average emission factors and more than 60% of PM2.5, UFP, and BC fleet-average emission factors would be reduced by eliminating the highest-emitting 5% HDDTs. Furthermore, high emissions of BC, PM2.5, and NO(x) tended to cluster among the same vehicles.     

Adaptation to climate change: the attitudes of stakeholders in the livestock industry

It is now widely accepted that climate change is happening and that future changes will impact on many aspects of society, including agriculture. To maintain food supplies, the agricultural industry must address climate change adaptation. Key to this is the attitudes of those within the industry likely to have responsibility for adapting. This study investigated stakeholder attitudes towards adaptation to climate change in the livestock industry. Findings reveal four attitudinal groups. First, there is a ‘farmer-focused group’ that has a positive attitude about the ability of livestock farmers to adapt to climate change, but that also has the opinion that they will need additional support to adapt. Second, there is an ‘incentive for enterprise, anti-GM (genetic modification) group’ with an attitudinal position stressing that the government should have a role in implementing regulations and providing finance. This group has a negative attitude towards GM technology and does not think it will be the answer to climate change. Third, there is an ‘information and education group’ whose attitude is that the provision of information is crucial for ensuring that the livestock industry adapts. Fourth, there is a ‘pro-technology group’ who have a positive attitude towards GM technology and who are therefore willing to embrace it as the route to adaptation. Three of these four groups favour soft adaptations that maintain flexibility within the system, and only the fourth is of the opinion that adaptive capacity is not an issue and that the industry is ready to implement hard adaptations.     

A lake classification concept for a more accurate global estimate of the dissolved inorganic carbon export from terrestrial ecosystems to inland waters

The magnitude of lateral dissolved inorganic carbon (DIC) export from terrestrial ecosystems to inland waters strongly influences the estimate of the global terrestrial carbon dioxide (CO₂) sink. At present, no reliable number of this export is available, and the few studies estimating the lateral DIC export assume that all lakes on Earth function similarly. However, lakes can function along a continuum from passive carbon transporters (passive open channels) to highly active carbon transformers with efficient in-lake CO₂ production and loss. We developed and applied a conceptual model to demonstrate how the assumed function of lakes in carbon cycling can affect calculations of the global lateral DIC export from terrestrial ecosystems to inland waters. Using global data on in-lake CO₂ production by mineralization as well as CO₂ loss by emission, primary production, and carbonate precipitation in lakes, we estimated that the global lateral DIC export can lie within the range of \( {0.70}_{-0.31}^{+0.27} \) to \( {1.52}_{-0.90}^{+1.09} \) Pg C yr^?1 depending on the assumed function of lakes. Thus, the considered lake function has a large effect on the calculated lateral DIC export from terrestrial ecosystems to inland waters. We conclude that more robust estimates of CO₂ sinks and sources will require the classification of lakes into their predominant function. This functional lake classification concept becomes particularly important for the estimation of future CO₂ sinks and sources, since in-lake carbon transformation is predicted to be altered with climate change.     

Attitudes towards sex selection for non-medical reasons: a review

Early non-invasive fetal sexing is widely available over the Internet, leading to concerns about its possible use for sex selection. The aim of this review is to summarise the results of surveys describing lay attitudes towards sex selection for non-medical reasons to help address or inform such concerns. A search of electronic databases and key journals was supplemented by an Internet search and citation-tracking. Twenty-one quantitative studies were identified. Most were conducted in the US, with five recent studies in the UK and Germany. Most studies found that, overall, people were not in favour of sex selection. However, this varied from 94 to 18%. People may hold more negative attitudes when the method of sex selection is specified, particularly if this involves termination of pregnancy (TOP). Attitudes towards the general availability of sex selection are less negative than those towards personal use. Attitudes were consistently negative in German surveys. Little is known of such attitudes outside the US, the UK and Germany, and how such attitudes may change as new sex selection technologies become available. Studies of use of early non-invasive fetal sexing for sex selection for non-medical reasons are needed to assess the extent to which concerns about usage are justified and to assist in debates on how these might be most appropriately addressed. Copyright © 2006 John Wiley & Sons, Ltd.     

Differences in morphology and habitat use among the native mussel <Emphasis Type="Italic">Mytilus trossulus</Emphasis>, the non-native <Emphasis Type="Italic">M. galloprovincialis,</Emphasis> and their hybrids in Puget Sound,Washington

Mytilus galloprovincialis (Mg), the Mediterranean blue mussel, is sympatric with the native M. trossulus (Mt) throughout much of the north Pacific, likely as the result of human introduction. We investigated the distribution of the two species and their hybrids (Mgt) in Puget Sound, Washington, to determine whether differences occur in habitat preference between the two species and hybrids. In addition, we investigated whether there were consistent size and shape differences between the native and introduced mussels and hybrids. Measurements of over 6,000 mussels from 30 sites, of which 1,460 were genotyped for a species-specific genetic marker, revealed that Mg and Mgt can be found throughout Puget Sound. Mg and Mgt were larger and exhibited a greater height:length ratio than Mt. Frequencies of Mg and Mgt were higher in subtidal habitats, such as docks, than on intertidal rocks, walls or pilings. Within intertidal habitats, Mg and Mgt were more frequent than Mt in the lower reaches of the intertidal. At slightly more than half the sites the frequency of the three genotypes accorded with random mating expectations suggesting no consistent barriers to gene flow between species. The standardized random sampling methods and simple morphometric identification techniques described here can be used to test whether the frequency of invasive mussels changes over time and space in Puget Sound.