Feasibility Study of Airbag Concept Applicable to Motorcycles Without Sufficient Reaction Structure

Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure.

Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm³ scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy.

Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test.

Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure.     

Characterization of products obtained from pyrolysis and steam gasification of wood waste,RDF, and RPF

Pyrolysis and steam gasification of woody biomass chip (WBC) obtained from construction and demolition wastes, refuse-derived fuel (RDF), and refuse paper and plastic fuel (RPF) were performed at various temperatures using a lab-scale instrument. The gas, liquid, and solid products were examined to determine their generation amounts, properties, and the carbon balance between raw material and products.The amount of product gas and its hydrogen concentration showed a considerable difference depending on pyrolysis and steam gasification at higher temperature. The reaction of steam and solid product, char, contributed to an increase in gas amount and hydrogen concentration. The amount of liquid products generated greatly depended on temperature rather than pyrolysis or steam gasification. The compositions of liquid product varied relying on raw materials used at 500 °C but the polycyclic aromatic hydrocarbons became the major compounds at 900 °C irrespective of the raw materials used. Almost fixed carbon (FC) of raw materials remained as solid products under pyrolysis condition whereas FC started to decompose at 700 °C under steam gasification condition.For WBC, both char utilization by pyrolysis at low temperature (500 °C) and syngas recovery by steam gasification at higher temperature (900 °C) might be practical options. From the results of carbon balance of RDF and RPF, it was confirmed that the carbon conversion to liquid products conspicuously increased as the amount of plastic increased in the raw material. To recover feedstock from RPF, pyrolysis for oil recovery at low temperature (500 °C) might be one of viable options. Steam gasification at 900 °C could be an option but the method of tar reforming (e.g. catalyst utilization) should be considered.     

Toxicity and metabolism of copper pyrithione and its degradation product, 2,2'-dipyridyldisulfide in a marine polychaete

We conducted acute toxicity tests and sediment toxicity tests for copper pyrithione (CuPT) and a metal pyrithione degradation product, 2,2′-dipyridyldisulfide [(PS)₂], using a marine polychaete Perinereis nuntia. The acute toxicity tests yielded 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 0.06 mg L⁻¹ and 7.9 mg L⁻¹, respectively. Sediment toxicity tests resulted in 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 1.1 mg kg⁻¹ dry wt. and 14 mg kg⁻¹ dry wt., respectively. In addition to mortality, sediment avoidance behavior and decreases in animal growth rate were observed; growth rate was the most susceptible endpoint in the sediment toxicity tests of both toxicants. Thus, we propose lowest observed effect concentrations of 0.3 mg kg⁻¹ dry wt. and 0.2 mg kg⁻¹ dry wt. for CuPT and (PS)₂, respectively, and no observed effect concentrations of 0.1 mg kg⁻¹ dry wt. for both CuPT and (PS)₂. The difference in the toxicity values between CuPT and (PS)₂ observed in the acute toxicity test was greater than the difference in these values in the sediment toxicity test, and we attribute this to (PS)₂ being more hydrophilic than CuPT. In addition to the toxicity tests, we analyzed conjugation activity of several polychaete enzymes to the toxicants and marked activity of palmitoyl coenzyme-A:biocides acyltransferase and UDP-glucuronosyl transferase was observed.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

State of mixture of atmospheric submicrometer black carbon particles and its effect on particulate light absorption

The state of mixture of light-absorbing carbonaceous particles was investigated in relation to light absorption properties using electron microscopic examinations, black carbon (BC) analyses of quartz filter by thermal/optical reflectance (TOR) method, measurements with two continuous light-absorbing photometers at a suburban site of Tsukuba, about 60 km northeast of Tokyo. The volume fraction of water-soluble material (?) in individual particles is important for assessing particulate light-absorbing and/or scattering of atmospheric aerosols. The values of ? in BC particles were evaluated by electron micrographs before and after dialysis (extraction) of water-soluble material. The mass absorption coefficient (MAC in units of m² g^?1) tended to increase with increasing the average ? in BC particles with the radius range of 0.05–0.5 μm. Thus, our results indicate that coatings of water-soluble material around BC particles can enhance the absorption of solar radiation. Moreover, the single scattering albedo (SSA) will increase because a large amount of coating material will scatter more light.     

Dechlorination/hydrogenation and destruction reactions of PCDDs in OCDD-added fly ash heated under vacuum

Octachlorodibenzo-p-dioxin (OCDD)-added, pretreated fly ash was heated under vacuum at sample temperatures ranging from T(s)=450 to 650 K. The fly ash and liquid nitrogen-cooled trap samples were analyzed for DD/DF through OCDD/DF. The total amounts of DD through OCDD decrease with increasing T(s), which indicates that dechlorination/hydrogenation (DCH) reactions are not the only reaction channels. Reduction of toxic equivalent (TEQ) for PCDDs by more than 99% was achieved in the fly ash by the vacuum heat treatment at T(s)=650 K for 4 h. The total amount of PCDDs and DD detected in the liquid nitrogen-cooled trap relative to that of added OCDD was about 17%, i.e., PCDDs and DD which were adsorbed to the fly ash surfaces can evaporate into the gaseous phase. The difference between the evaporation behavior of PCDDs in the present and the previous studies is discussed in the light of their states of existence.     

Methods of statistical analysis of quantitative data obtained by toxicological bioassays using rodents in Japan: historical transition of the decision tree

Massive amounts of quantitative data are being obtained by toxicity tests with time. These data sometimes include the data with a different distribution pattern or with different numbers of animals in each group. The tree-type algorithm has long been used commonly to promptly analyze the difference between the control group and dosage groups. In Japan, the decision tree has been used since 1982 with several modifications of the initial procedure. Recently, the method has been revised to have a high power. The changes have been made in two directions; one is a sophisticated method and the other is a simplified method. In this paper, the historical transition of the decision tree is described and the future of the decision tree forecasted.     

Genetic relationships of pilchards (genus: Sardinops) with anti-tropical distributions

The pilchards (genus Sardinops), one of the major components of the world's harvest of fishes, is distributed sporadically in the temperate zone on a global scale. Mitochondrial DNA variation in 95 pilchards from nine worldwide localities in five current systems was examined using ten restriction enzymes. Although several opinions have been proposed on the global population structure of the genus Sardinops, our results clearly rejected the hypothesis of gene flow among geographically distant populations on a global scale. Results indicate that the Japanese pilchards and the Australian and South African pilchards were derived from the eastern Pacific populations, following the speciation of Sardinops in the Pacific, after the formation of the Isthmus of Panama. An intermixing of the northeastern and southeastern Pacific populations during the Pleistocene glacial maxima is suggested from their genetic affinities.     

Assessing local-scale inclusive wealth: a case study of Sado Island,Japan

Present trends of urbanization are accompanied by increasing demographic and economic shrinkage of rural regions. In countries such as Japan, these rural regions trail behind metropolitan counterparts according to GDP, the conventional measure used to guide governmental policies. Yet, past research suggests that these regions may be undervalued. Further, the Inclusive Wealth Index (IWI), largely only used at the national level, may be able to capture aspects previously missed. As such, our study attempts to highlight the wealth of rural regions by comparing the inclusive wealth of Sado Island and Japan between 1990 and 2014. Minor methodological modifications were made according to data availability at the local level and to improve the accuracy of human capital estimations. Results captured the ongoing shrinkage of Sado and demonstrate the distinct potential of the IWI as a stock measure. Sado’s per capita wealth was about 10% lower than the national averages, but its natural capital was about threefold national averages. Supplementary estimations of the natural capital of fisheries and cultivated forests suggest that inclusion of additional factors in the evaluation would further increase the relative valuation of rural regions. We discuss implications of our estimations for wellbeing, and conclude with a critical appraisal of the IWI calculation towards policy implementation of the index.     

Urban tinkering

Cities are currently experiencing serious, multifaceted impacts from global environmental change, especially climate change, and the degree to which they will need to cope with and adapt to such challenges will continue to increase. A complex systems approach inspired by evolutionary theory can inform strategies for policies and interventions to deal with growing urban vulnerabilities. Such an approach would guide the design of new (and redesign of existing) urban structures, while promoting innovative integration of grey, green and blue infrastructure in service of environmental and health objectives. Moreover, it would contribute to more flexible, effective policies for urban management and the use of urban space. Four decades ago, in a seminal paper in Science, the French evolutionary biologist and philosopher Francois Jacob noted that evolution differs significantly in its characteristic modes of action from processes that are designed and engineered de novo (Jacob in Science 196(4295):1161–1166, 1977). He labeled the evolutionary process “tinkering”, recognizing its foundation in the modification and molding of existing traits and forms, with occasional dramatic shifts in function in the context of changing conditions. This contrasts greatly with conventional engineering and design approaches that apply tailor-made materials and tools to achieve well-defined functions that are specified a priori. We here propose that urban tinkering is the application of evolutionary thinking to urban design, engineering, ecological restoration, management and governance. We define urban tinkering as:

A mode of operation, encompassing policy, planning and management processes, that seeks to transform the use of existing and design of new urban systems in ways that diversify their functions, anticipate new uses and enhance adaptability, to better meet the social, economic and ecological needs of cities under conditions of deep uncertainty about the future.

This approach has the potential to substantially complement and augment conventional urban development, replacing predictability, linearity and monofunctional design with anticipation of uncertainty and non-linearity and design for multiple, potentially shifting functions. Urban tinkering can function by promoting a diversity of small-scale urban experiments that, in aggregate, lead to large-scale often playful innovative solutions to the problems of sustainable development. Moreover, the tinkering approach is naturally suited to exploring multi-functional uses and approaches (e.g., bricolage) for new and existing urban structures and policies through collaborative engagement and analysis. It is thus well worth exploring as a means of delivering co-benefits for environment and human health and wellbeing. Indeed, urban tinkering has close ties to systems approaches, which often are recognized as critical to sustainable development. We believe this concept can help forge much-closer, much-needed ties among engineers, architects, evolutionary ecologists, health specialists, and numerous other urban stakeholders in developing innovative, widely beneficial solutions for society and contribute to successful implementation of SDG11 and the New Urban Agenda.