Ozone–dioxane delignification from the cell walls of Japanese cypress (Chamaecyparis obtusa Endl.)

Delignification from the cell walls with a combination of ozone oxidation and dioxane–water extraction using thin sections of a softwood, Japanese cypress (Chamaecyparis obtusa Endl.), was studied to determine its suitability for the production of recyclable cellulose-based materials from wood waste. The visible-light absorption spectra of treated wood sections revealed that delignification from the cell walls with ozone increased with increasing ozonization time. Ozone delignification proceeded from the lumen side toward the middle lamella within the secondary wall of a cell, and it proceeded faster in early wood than in late wood within an annual ring. Mild ozonization for 10–30 min was sufficient for the removal of lignin from the cell walls when sections were extracted with dioxane after ozonization. The results obtained here demonstrate that microspectrometry coupled with the Wiesner reaction is useful for the quantitative analysis of lignin in cell walls.     

Preparation of Cationic/Anionic Chitin Nanofiber Composite Materials

In this study, we investigated the preparation of cationic/anionic chitin nanofiber (CNF) composite materials by electrostatic interaction. An aqueous dispersion of amidinium CNF was prepared by a top-down approach, and a maleylated CNF film was obtained by a bottom-up approach from a chitin ion gel in an ionic liquid with subsequent maleylation on the CNFs. The resulting film was dispersed in ammonia (aq), which was then mixed with the aqueous cationic CNF dispersion to give the composite film. The composition of the two CNFs was evaluated by scanning electron microscopy and X-ray diffraction measurements. Tensile testing results indicated that the mechanical properties of the composites were enhanced with increasing degrees of substitution of the cationic and anionic groups on CNFs, and also when the molar ratio of these groups approached 1:1. The dissociation of the two kinds of CNFs by alkaline treatment of the composite film was achieved, suggesting the presence of an electrostatic interaction among the interactions between them.     

Preparation of Cellulose/Xanthan Gum Composite Films and Hydrogels Using Ionic Liquid

This paper reports the preparation of cellulose/xanthan gum composite films and hydrogels through gelation with an ionic liquid. Mixtures of cellulose and xanthan gum in desired weight ratios with an ionic liquid, 1-butyl-3-methylimidazolium chloride (BMIMCl), were thinly placed on a Petri dish and heated at 100 °C for 9 h to obtain the solutions. Then, the solutions were left standing at room temperature for 1 day for the progress of gelation. The resulting ion gels were subjected to Soxhlet extraction with ethanol to remove BMIMCl, followed by drying under ambient conditions to obtain the composite films. The crystalline structures of the polysaccharides and the mechanical properties were evaluated by powder X-ray diffraction measurement and tensile testing of the films, respectively. The ion gels in various cellulose/xanthan gum weight ratios, which were prepared in a test tube by the same procedure, were immersed in water for the exchange of disperse media to obtain the cellulose/xanthan gum composite hydrogels. Water contents of all the materials were higher than 90 %. The mechanical properties of the hydrogels were evaluated by compressive testing.     

Laboratory evaluation of an aldehyde scrubber system specifically for the detection of acrolein

We demonstrate the use of an aldehyde scrubber system to resolve isobaric aldehyde/alkene interferences in a proton transfer reaction mass spectrometer (PTR-MS) by selectively removing the aldehydes from the gas mixture without loss of quantitative information for the alkene components. The aldehyde scrubber system uses a bisulfite solution, which scrubs carbonyl compounds from the gas stream by forming water-soluble carbonyl bisulfite addition products, and has been evaluated using a synthetic mixture of acrolein and isoprene. Trapping efficiencies of acrolein exceeded 97%, whereas the transmission efficiency of isoprene was better than 92%. Quantification of the PTR-MS response to acrolein was validated through an intercomparison study that included two derivatization methods, dinitrophenylhydrazine (DNPH) and O-(4-cyano-2-ethoxybenzyl)hydroxylamine (CNET), and a spectroscopic method using a quantum cascade laser infrared absorption spectroscopy (QCL) instrument. Finally, using cigarette smoke as a complex matrix, the acrolein content was assessed using the scrubber and compared with direct QCL-based detection.     

PM<Subscript>2.5</Subscript>-related health impacts of utilizing ammonia-hydrogen energy in Kanto Region,Japan

Ammonia has emerged as a promising hydrogen carrier with applications as an energy source in recent years. However, in addition to being toxic, gaseous ammonia is a precursor of secondary inorganic aerosols. The concentration of ambient fine particulate matter (PM_2.5) is intrinsically connected to public health. In this study, PM_2.5-related health impacts of utilizing ammonia-hydrogen energy in Kanto Region, Japan, were investigated. It was assumed that 20% of the electricity consumption in Kanto Region, the most populated area in Japan, was supplied by ammonia-hydrogen energy. The PM_2.5 resulted from incomplete ammonia decomposition was simulated by a chemical transport model: ADMER-PRO (modified version). Based on the incremental PM_2.5 concentration, health impacts on the elderly (individuals over 65 years old) were quantitatively evaluated. The ammonia emission in this scenario increased PM_2.5 by 11.7% (0.16 μg·m^–3·y^–1) in winter and 3.5% (0.08 μg ·m^–3·y^–1) in summer, resulting in 351 premature deaths per year. This study suggests that costeffective emissions control or treatment and appropriate land planning should be considered to reduce the associated health impacts of this type of energy generation. In addition, further in-depth research, including cost-benefit analysis and security standards, is needed.

Open image in new window

     

The role of metals in dioxin formation from combustion of newspapers and polyvinyl chloride in an incinerator

Newspapers impregnated with NaCl mixed with various chloride metals (CuCl2, MgCl2, MnCl2, FeCl3, NiCl2, and CoCl2) and electric wire coated with polyvinyl chloride (PVC) were combusted in a well-controlled incinerator. Exhaust gas samples collected at the outlet of the incinerator were analyzed for dioxins (PCDDs, PCDFs, and coplanar PCBs) by gas chromatography/mass spectrometry. The amount of total dioxins formed from newspaper samples ranged from 34.2 ng/g (with NaCl+CoCl2) to 67.0 ng/g (with NaCl+CuCl2). PCDFs composed 88-94% of the total dioxins formed in the exhaust gases. The highest levels of PCDF isomers obtained were Cl3-CDF from the sample with NaCl+CuCl2 (14.8 ng/g), Cl2-CDF from the sample with NaCl+MgCl2 (12.3 ng/g), and Cl(1)-CDF from samples with NaCl+MnCl2 (12.6 ng/g), with NaCl+FeCl3 (11.8 ng/g), and with NaCl+NiCl2 (13.3 ng/g), and with NaCl+CoCl2 (8.62 ng/g). The total of Cl4-8-CDDs comprised 76-88% of the total Cl1-8-CDDs. In particular, Cl7-CDDs had the highest levels except for the sample with NaCl+NiCl2. Total dioxins formed from samples of electric wire coated with PVC and PVC alone were 38.3 ng/g and 112 ng/g, respectively, suggesting that the presence of copper reduced dioxin formation.     

Spawning pattern and type of fecundity in relation to ovarian allometry in the round herring <Emphasis Type="Italic">Etrumeus teres</Emphasis>

Spawning pattern (assessed by seasonal changes in ovarian developmental stages) and type of fecundity (assessed by analysis of oocyte-size frequency distributions) of the round herring Etrumeus teres were studied in relation to ovarian growth and seasonal changes in the gonadosomatic (GSI), hepatosomatic (HSI) and liposomatic (LSI) index as well as the somatic condition of spawners (CS) in a spawning ground of southern Japan. Except for summer, mature and recently spawned ovaries occurred all year round. Oogonia and primary oocytes were present in all ovaries, and cortical alveoli stage (CA) oocytes occurred in all mature, hydrated and partially spent (PS) females (PS: females containing post-ovulatory follicles). Before hydration, a clutch of larger yolked oocytes, undergoing synchronous growth (range 0.7–1.1 mm), was present in mature ovaries which was completely separated from a more heterogeneous clutch of oogonia, primary and secondary oocytes (<0.150 mm) and oocytes in the CA stage (range 0.15–0.60 mm). As vitellogenesis progressed, the yolked clutch increased in size but the CA oocytes remained arrested. The latter entered into the secondary growth phase when hydration started in the advanced batch. Ovarian growth was isometric in all developmental stages, validating the use of GSI, which showed a consistent monthly evolution among years. Spawning stopped in summer (July and August) and peaked in winter and spring. HSI correlated positively with GSI on both a monthly mean basis (r = 0.76) and individual fish basis (liver weight explained 67–83% of the variability in ovary weight when females were grouped into 1-unit GSI intervals) suggesting a significant role of liver in vitellogenesis. LSI and CS also showed marked seasonal changes peaking from summer to middle autumn. Overall results suggest that E. teres is a multiple spawner with a group-synchronous ovarian development and indeterminate annual fecundity, with the three processes linked to an isometric growth of the ovary. We propose that such a reproductive pattern is an adaptation to produce batches of large pelagic eggs through a protracted spawning season.     

Dechlorination of polychlorinated organic compounds by electrochemical reduction with naphthalene radical anion as mediator

Electrochemical reduction with electrochemically generated naphthalene radical anion in N,N-dimethylformamide was applied to the dechlorination of five representative POPs, namely HCB, lindane, DDT, PCP and aldrin. Rapid and complete dechlorination was possible for lindane and DDT to give nearly quantitative yields of benzene and 1,1-diphenylethane, respectively. HCB was reduced through complex reaction pathways to yield unknown products. Dechlorination of PCP and aldrin beyond dichlorinated compounds was difficult because of their very negative reduction potential. The reaction pathways for each dechlorination were proposed with the identification of intermediates.     

Quantities of bisphenol a leached from plastic waste samples

To quantify the leaching of bisphenol A into water, various samples of plastic waste were cut into small pieces, soaked in water for two weeks at room temperature in the dark, and the concentration of bisphenol A in the water determined by gas chromatography/mass spectrometry (GC/MS). The amount of bisphenol A leached from the plastic wastes ranged from undetectable to 139 micrograms/g. The detection limit was 2 ng/g when 100 g of plastic waste was used. Polyvinyl chloride products yielded the highest concentrations because bisphenol A is used in its manufacture as a stabilizer.