Determination of the Detailed Hydrocarbon Composition and Potential Atmospheric Reactivity of Full-Range Motor Gasolines

The quantitative data obtained with a capillary GLC method, which is used to determine the individual C₃-C₁₂ hydrocarbons in full-range motor gasolines, have been employed in a computer program to calculate the hydrocarbon composition of the vapor in equilibrium with a gasoline at 100°F, as well as the equilibrium vapor-pressure of the gasoline at that temperature. The method used for computation is similar to that previously described by McEwen, assuming the gasoline to behave as an ideal liquid. Also calculated is the potential atmospheric reactivity of this equilibrium vapor relative to that from other gasolines when specific reactivity weighting factors for the individual hydrocarbons are employed. Calculated total vapor-pressure data agree well with experimental Reid vapor-pressure data obtained for typical premium-grade gasolines. Definite differences were observed in the relative potential atmospheric reactivities calculated at 100°F for the equilibrium vapors from the test gasolines.     

Automotive Exhaust Emission Levels by Geographic Area and Vehicle Make A Nationwide Survey

Gross average automotive exhaust emissions data collected by the Atlantic Richfield Clean Air Caravan during the summer of 1970 showed only slight geographical variations when the specific makes were ignored. When considering specific makes, significant differences were found on an average emissions basis. Vehicle population—emission distributions showed wide variations in the 50% population levels and in the percent of vehicles with emissions greater than specified values. Hydrocarbon (HC) and carbon monoxide (CO) data are given on a gross basis for the 1970, 1968-69, 1966-67, and pre-1966 model year group vehicles. Average HC and CO emissions and vehicle population-Idle emissions distribution curves are included for specific make vehicles in selected areas.     

Surface Air Pollutant Concentration Frequency Distributions: Implications for Urban Modeling

With the development of ambient air quality standards (AAQS), the need arises to describe the characteristics of regional surface air-pollutant concentration frequency distributions. In the evaluation of land use plans, numerous agencies will be concerned with evaluating the effectiveness of emission zoning and/or control actions. On a regional basis, one means of performing this assessment lies in determining the changes in the pollutant frequency distributions resulting from control actions.

This study presents new data concerning the surface air-pollutant concentration frequency distributions observed for area sources and continuous point sources, and compares these distributions with those of the pertinent meteorological variables describing the transport and diffusion of the pollutant. The observed surface air pollutant frequency distributions are compared to those corresponding to simple modeling concepts from either an urban area source or a continuous point source. For an urban source and a relatively inert pollutant like CO, we found that the observed frequency distribution for CO surface air concentration parallels the approximately log-normal frequency distribution of the reciprocal of the wind speed. We show that the constant relating these two well-correlated frequency distributions can be determined either experimentally or with a numerical simulation model of air pollution. The usefulness of numerical models in air pollution is discussed.     

Economic Impact of Mass Production of Alternative Low Emission Automotive Power Systems

The study considers a range of possible effects on the transportation industry, satellite industries, the labor market, and the economy which may be anticipated in the event mass production of unconventional low emission automotive propulsion systems should occur, whether as a consequence of federal intervention, or not. A postulated 1 976 Otto Cycle Internal Combustion Engine equipped with a dual catalyst manifold reactor and other “conventional” emission control devices was compared in detail with a Regenerative Free Turbine Engine and a Rankine Cycle Engine, as specified by the contracting agency. Manufacturing costs, operating and ownership costs, consumer demand, inter-industry effects, employment, resource requirements, and international trade implications were analyzed in depth under a number of plausible sets of policy constraints and parametric variations. Principal conclusions are that conversion over a 10 year period is feasible, that manufacturing cost differentials are less critical than fuel consumption and cost differentials, that industry/employment impacts are minor, and that resource/trade effects are dominated by petroleum imports. Implications for federal policy are discussed.     

Roof Monitor Emissions: Test Methodology

Studies of roof monitor emissions are conducted for two reasons: (1) to obtain design data necessary to engineer control systems to meet existing regulations, and (2) to determine projected control costs which can influence present day proposals for process change. Heated wire anemometers and rotating vane anemometers have been selected for velocity measurements, and high-volume air samplers have been selected to collect the particulate sample. Evaluation of other types of velocity sensing devices are described in the paper.

Roof monitor studies must be preceded by a preliminary survey to allow the project engineer to determine the test sampling locations and specific methodology necessary for the given study, and to allow the engineer to determine the type of safety equipment, scaffolds, and power requirements necessary to complete the study.

Field tests are conducted by operating a number of high-volume air samplers simultaneously while at the same time measuring the velocity of the gas through the monitor opening. Curves of particulate concentration and velocity as a function of monitor length are constructed. The concentration and velocity curves are then integrated together and the resultant curve is multiplied by the monitor width to determine a curve of mass emission rate as a function of monitor length. The total mass emission rate is represented by the area under the mass emission rate curve.

Procedures for calibrating the anemometers and correcting for the effect of power fluctuation on the high-volume sampler operation are described. Data evaluation procedures and discussion of test error are also described.

A study can cost between 10 and 20 thousand dollars, including the cost of manpower and the cost of scaffolds, power, cables, etc. It can take four months or more to conduct a study, from the preliminary survey phase through the report phase.     

Ethylene: An Urban Air Pollutant

Ethylene is an unusual air pollutant in that it is a plant hormone. Motor vehicle exhaust is a primary source. In the Washington, D. C, area, ethylene concentrations ranged from 700 ppb in the city center to 39 ppb in areas outside the circumferential beltway. Plants grown in these concentrations of ethylene, using controlled environment chambers, exhibited typical symptoms of ethylene toxicity: reduced growth, premature senescence, and reduced flowering and fruit production. When plants were grown in carbon-filtered ambient air, which was also filtered through KMnO₄ to remove ethylene by oxidation, growth, flowering, and fruit production increased. These observations demonstrate that ethylene air pollution is a continual source of stress for plant growth and development in an urban environment.     

The Formation of Mg3Ca(S04)4 during the Sulfation Reaction of Dolomite

Abstract

Inspection and maintenance programs for motor vehicles in the United States increasingly use loaded mode mass emissions testing (IM240). A method was developed to predict mass emission rates and mass emission changes, particularly from repair benefits, using a low-cost, portable four-gas non-dispersive infrared (NDIR) vehicle exhaust gas analyzer. A single vehicle was tested several times with the analyzer while on the dynamometer and undergoing successive repairs. Excellent correlations for CO and HC were observed. Five vehicles were measured using an on-road driving loop before and after emissions-related repairs, while another three vehicles were tested with no repairs performed. The on-road concentration data used to guide the repair process were converted to grams per gallon; when divided by estimated miles per gallon, this gave grams per mile emissions for comparison to IM240. Correlation coefficients (r²) of 0.87 for CO and 0.76 for HC were achieved for the 13 tests. The linear correlations between IM240 and emissions measured by this method would allow repair facilities to perform a relatively inexpensive test for diagnostic purposes and to estimate repair effectiveness without the need for a dynamometer.     

A Wind Tunnel Study of Gaseous Pollutants in City Street Canyons

Steady state mean concentrations of tracer gas were measured in a 400:1 scale model of an idealized city with variable geometry placed within a wind tunnel at various orientations to the mean flow for a free stream velocity of 6.8 ft/sec. The tracer gas was released from two parallel line sources to simulate lanes of traffic in an effort to quantify the persistence of pollution as well as the mean values realized at street levels. An aerodynamically rough turbulent boundary layer of neutral thermal stratification was employed to simulate the atmosphere. Values of concentration measured in the model city were converted to prototype concentrations in ppm and compared to National Ambient Air Quality Standards. It was shown that single isolated structures may cause favorable mixing of pollution downwind but very high concentrations exist in the immediate leeward vicinity of the building. Two favorable geometries for city blocks tested were found to reduce pedestrian exposure to pollution both near heavy traffic congestion and downwind. It was concluded that the pollutant dilution was controlled by the mean flow rather than by turbulent diffusion and that the lateral spread of the plume was slight as one proceeded downwind of the line source. The combination of favorable geometry and higher dilution velocities may bring pollution levels down to existing Air Quality Standards. The body of information presented in this paper should interest city planners and air quality monitoring personnel, as well as those researchers attempting to study and model flow in city street canyons. It provides order of magnitude estimates on pedestrian and office worker exposure to pollutants under a wide range of conditions.     

Weekday-Weekend Pollutant Studies of the Los Angeles Basin

Pollutant data from the Los Angeles Basin were analyzed for weekday-weekend differences for the smog months of June through September 1972 and 1973. The pollutants investigated were oxidant, NO, NO₂, total hydrocarbons (HC), CO, and particulates. In order to maintain the diurnal variation, the concentration percentiles were calculated for each weekday and weekend hour.