Three-dimensional numerical simulation of water quality and sediment-associated processes with application to a Mississippi Delta lake

A three-dimensional water quality model was developed for simulating temporal and spatial variations of phytoplankton, nutrients, and dissolved oxygen in freshwater bodies. Effects of suspended and bed sediment on the water quality processes were simulated. A formula was generated from field measurements to calculate the light attenuation coefficient by considering the effects of suspended sediment and chlorophyll. The processes of adsorption–desorption of nutrients by sediment were described using the Langmuir Equation. The release rates of nutrients from the bed were calculated based on the concentration gradient across the water–sediment interface and other variables including pH, temperature and dissolved oxygen concentration.The model was calibrated and validated by applying it to simulate the concentrations of chlorophyll and nutrients in a natural oxbow lake in Mississippi Delta. The simulated time series of phytoplankton (as chlorophyll) and nutrient concentrations were generally in agreement with field observations. Sensitivity analyses were conducted to demonstrate the impacts of varying suspended sediment concentration on lake chlorophyll levels.     

Degradation of Carbofuran in Water by Solar Photocatalysis in Presence of Photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 × 10^?6 M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

Treatment of mature landfill leachate by biofilters and Fenton oxidation

A series of processes by biofilter and Fenton oxidation to treat mature landfill leachate has been devised. At a hydraulic loading rate of 20 l m^?3 d^?1, a biofilter packed with aged refuse is found to remove 80% of chemical oxygen demand (COD), 89% of ammonia nitrogen and 96% of total phosphorus (TP). Particularly, TP levels dropped below 1 mg l^?1. The optimal condition for Fenton oxidation was selected to be an initial pH of 5, a dosage of 0.01 and 0.02 mol l^?1 of FeSO₄ and H₂O₂, respectively, and a duration of 3 h, where COD removal efficiency reaches 58.6%, and BOD₅/COD ratio is raised from 0.05 to 0.20. Subsequent treatment by a biofilter packed with slag reduces COD, ammonia nitrogen levels to less than 100, 25 mg l^?1, respectively. A pilot scale experiment conducted in situ demonstrates that this series of processes exhibits a high efficiency in removing pollutants from mature landfill leachate and it is viable for application.     

Methodology for management of endosulfan contaminated eluent.

Management of Endosulfan contaminated eluent (24 mg/l) resulting from a treatment process to remove Endosulfan from water with wood charcoal, was attempted using various methods viz. volatilisation, hydrolysis and sorption by viable cell bacteria with and without acclimatisation. Volatilisation failed in giving better result, as Endosulfan was not considerably volatile. It could achieve a removal efficiency of 1.4-2%. Hydrolysis resulted in 28.4% and 17.9% removal of Endosulfan in acidic and alkaline media, respectively. Viable cell bacteria (aerobic) without prior acclimatization showed efficiency of 89.7% and after prior acclimatisation showed 96% removal efficiency. Sorption by the acclimatized biomass was found a suitable method for the removal of Endosulfan at a concentration of 24 mg/l.     

An ensemble Kalman filter for atmospheric data assimilation: Application to wind tunnel data

In the previous work (Zheng et al., 2007, Zheng et al., 2009), a data assimilation method, based on ensemble Kalman filter, has been applied to a Monte Carlo Dispersion Model (MCDM). The results were encouraging when the method was tested by the twin experiment and a short-range field experiment. In this technical note, the measured data collected in a wind tunnel experiment have been assimilated into the Monte Carlo dispersion model. The uncertain parameters in the dispersion model, including source term, release height, turbulence intensity and wind direction have been considered. The 3D parameters, i.e. the turbulence intensity and wind direction, have been perturbed by 3D random fields. In order to find the factors which may influence the assimilation results, eight tests with different specifications were carried out. Two strategies of constructing the 3D perturbation field of wind direction were proposed, and the result shows that the two level strategy performs better than the one level strategy. It is also found that proper standard deviation and the correlation radius of the perturbation field play an important role for the data assimilation results.     

A Comparison of Volunteer,BioRID P3 and Hybrid III Performance in Rear Impacts

The most important tool for testing seat-systems in rear impacts is a crash test dummy. However, investigators have noted limitations of the most commonly used dummy, the Hybrid III. The BioRID I is a step closer to a biofidelic crash test dummy, but it is not user-friendly and the straightening of the thoracic spine kyphosis is smaller than that 220of humans. To reduce these problems, a new BioRID prototype was developed, the P3. It has new neck muscle substitutes, a softer thoracic spine and a softer rubber torso than does the BioRID I.

The BioRID P3 was compared with volunteer test data in a rigid and a standard seal without head restraints. The dummy kinematic performance, pressure distribution between subject and seatback, neck loads and accelerations were compared with those of ten volunteers and a Hybrid III. The BioRID P3 provided repeatable test results and its response was very similar to that of the average volunteer in rear impacts at Δv = 9 km/h.     

Adaptation potential of ecosystem-based management to climate change in the eastern Canadian boreal forest

Ecosystem-based management (EBM) of forests is gaining acceptance for its focus on the maintenance of the long-term integrity of ecosystem processes, but climate change challenges this view because of its impacts on these very processes. We have therefore evaluated the robustness of EBM to projected climate change, considering the role of climate on forest growth and fire regime in a boreal forest of eastern Canada. A climate sensitive growth index model was calibrated for three commercial species and used to project the evolution of merchantable volume for two climate scenarios (B1 and A2) under conventional and EBM strategies. Current burn rate and burn rates under future climate scenarios were also considered. Under the most extreme projected climate scenario, the periodic timber supply could be reduced by up to 79% through direct (growth reduction) and indirect (fire) effects. However, ecological indicators show that EBM is a more robust forest management strategy than conventional one demonstrating its adaptation potential to climate change at least in the short term.     

柠檬酸钠强化剩余污泥酶水解和酸化的研究

厌氧条件下,研究了阳离子络合剂柠檬酸钠(SC)对剩余污泥酶水解和酸化的影响.结果表明:络合剂SC提高了污泥酶水解和酸化的效率,溶解性蛋白质和碳水化合物溶出量增加,SC的最佳投加剂量为0.432 g·g-1(以TS计,下同).络合剂SC可以提高污泥中短链脂肪酸(SCFAs)的积累量,同时减少达到最大SCFAs积累的时间,缩短厌氧消化时间.空白对照组和蛋白酶组的总SCFAs积累量分别在反应第7 d和第6 d达到最大值,而SC+蛋白酶组(SC 0.432 g·g-1)在反应第2 d就达到了最大值.从酶活性的变化和SEM图可知,SC的投加破坏了EPS的网络结构,原来被束缚、隐藏于污泥基体中的水解酶得到释放,从而提高了污泥水解速率.     

3BER-S工艺用于再生水深度脱氮同步去除PAEs的可行性

为了考察三维电极生物膜硫自养耦合工艺(3BER-S)对再生水进行深度脱氮同步去除邻苯二甲酸酯(PAEs)的可行性,基于3BER-S反应器内已挂膜活性炭填料静态吸附PAEs能力测定和动态反硝化脱氮同步除PAEs运行结果,分析了3BER-S反应器同步脱氮去除PAEs的工艺特性和作用机制.结果表明,挂膜活性炭填料对邻苯二甲酸二丁酯(DBP)、邻苯二甲酸二(2-乙基)己酯(DEHP)的平均吸附去除率分别为85.84%、97.12%,平衡吸附容量为0.142 6mg·g-1、0.162 mg·g-1,达到吸附饱和的时间分别为120 min、60 min;PAEs对3BER-S反硝化系统脱氮效果影响不明显,加入PAEs前后反应器出水TN的浓度在1~2 mg·L-1之间,TN的平均去除率达到了94%以上;3BER-S反硝化系统对PAEs有较强的去除能力,出水中DBP和DEHP的浓度在0~6μg·L-1范围内、去除率均在96%以上;3BER-S对PAEs的去除是吸附、生物降解和电化学协同作用结果.模拟污水厂二级出水经过3BER-S工艺处理后,DBP和DEHP的浓度满足《城市污水再生利用地下水回灌水质标准》(GB/T 19772-2005)所规定的限值.     

Cloning and expression analysis of ScBAK1 gene and its alternative spliceosome in sugarcane北大核心CSCD

Alternative splicing (AS) is an important part of regulation of eukaryotic gene expression. BAK1 (Brassinosteroid insensitive1-associated receptor kinase 1) is a specific type of plant serine/threonine protein kinases, and can regulate growth and development and natural immunization. To reveal the responses of sugarcane BAK1 gene to the adverse environment, a ScBAK1 gene and its alternative spliceosome, termed ScBAK1 (GenBank accession number: KP032226) and ScBAK1 S1 (GenBank accession number: KP032227), were cloned from leaf cDNA of Yacheng 05-179 utilizing the methods of electronic cloning and RT-PCR. The open reading frame (ORF) length of ScBAK1/ScBAK1 S1 gene was 1 860bp/1 770bp, encoding 619/589 amino acids residues. The predicted molecular weight of the protein was 69.28 kDa/ 65.76 kDa. Both proteins were located in plasma membrane, estimated as acid, hydrophikic and secretive proteins. Random coil and alpha helix gave priority to extended strand in their secondary structure without beta turn. The most important protein function was cell envelope, secondly biosynthesis of amino acids and cofactors. Real-time quantitative PCR analysis revealed that the expression of sugarcane ScBAK1 S1 gene exhibited the reduced expression trend under smut fungus stress and various abiotic exogenous stresses, including SA, CuCl2, PEG, ABA, NaCl and JA, while the expression of ScBAK1 gene was induced by SA, CuCl2, PEG, NaCl and smut fungus stresses. The phenomenon showed that the absent sequences or amounts of ScBAK1 S1 gene plays a key role in the response of ScBAK1 to the stress of sugarcane smut fungus, osmotic stress and cell growth. The differential expression of ScBAK1 and ScBAK1 S1 lays a foundation for further research on the function of ScBAK1 gene under biotic and abiotic stress.