Recycling of an acrylate–glass fiber reinforced polyester composite

Journal of Material Cycles and Waste Management - Recycling possibilities were evaluated for a composite waste composed of glass fiber reinforced polyester bound to a layer of crosslinked...     

Oyster shell reduces PAHs and particulate matter from incense burning

This is the first report showing reduction of particle matter and PAHs from incense burning by addition of oyster shell. Worshiping ancestors and gods by burning incense sticks and joss paper is a very important tradition in many Asian regions. More than 45 % of families in Taiwan burn incense twice a day. Unlike joss paper burning, most of the incense burning occurs indoors, thus creating a risk for human health. Previous reports have indeed evidenced toxicity of incense, notably due to particulate matter and polycyclic aromatic hydrocarbons (PAHs). However, there are few methods to reduce particle matter and PAHs from incense burning. We hypothesize that oyster shell may be used to reduce incense fumes toxicity. Indeed a large amount of unused oyster shell is discarded due to increasing seafood consumption. Here, two types of incense were made in the laboratory, and then 5–30 % of oyster shells were added to the incense to study the reduction of particle matter and PAHs. Results show that reduction of particle matter and PAH emission increased with oyster shell addition. The reduction of emission factors is ?35 % for mean particle matter, ?21 % for particle-phase PAHs, and ?37 % for benzo[a]pyrene equivalent concentration (BaP_eq), using 30 % oyster shell additive. The addition of 10 % oyster shell reduces the burning time by 8.3 min, increases the burning rate by 3.4 mg/min, and reduces particle matter by 6.4 mg/g incense, particle-phase PAHs by 0.67 μg/g incense, and BaP_eq by 0.23 μg/g incense. The reductions of particle matter, particle-phase PAHs, and BaP_eq correspond to about 640 metric tons, 67, and 23 kg, respectively, per year. Our findings will help to produce safer and cleaner incense.     

Stability studies of cholesterol lowering statin drugs in aqueous samples using HPLC and LC–MS

In this study, stability of statin drugs in different conditions, such as various pH, diverse solvents ratio, presence of UV, and sunlight have been investigated. Results suggest strong dependence of statins upon pH, potential environmental persistence towards sun light, and UV light degradation via singlet excited state obtained by excitation into the π–π* band. In acidic conditions interconversion between lactone and hydroxy acid forms in aqueous solutions at room temperature is retarded, while for the same sun-exposed samples are accelerated. Longer exposures lead to the degradation processes. Statin interconversion in water is much lower than in acetonitrile.     

The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Comparisons of metal leachability for various wastes by extraction and leaching methods

The objective of this research was to evaluate three extraction tests, i.e., toxicity characteristic leaching procedures (TCLP), extraction procedure (EP), and American Society for Testing and Materials (ASTM) methods, for their ability to extract metals in chemical sludge and incineration bottom ash, in terms of the precision of analytical results. Typical chemical sludges, including the electroplating and dye-stuff sludges, the municipal solid waste incineration bottom ash, the leather debris, and the steel-mill bottom residue containing Cd, Cr, Cu, Pb, and Zn were prepared for the lysimetry test (dynamic testing) to compare with the extraction results. Results show that for bottom residue and dye-stuff sludge, the concentration of metal leached was almost the same between the lysimetry leaching and the TCLP tests. The metal concentration followed the order: TCLP approximately = EP > ASTM. TCLP and EP exhibited almost the same relative standard deviation (RSD) value. Therefore, the results of the TCLP tests for bottom residue and dye-stuff sludge, which have a low metal content and alkalinity, can be used to estimate the metal concentration leached by typical acid rain in Taiwan; whereas the ASTM extraction test may be a better indicator of the lysimetry test.     

Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Analysis of polychlorodibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) in baked-salt food additives in Korea

Thirty-one samples of baked-salt products used in commercial food additives were analyzed for the presence of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). Dioxins were highly detected in 12 samples of baked salts. The amount of dioxins found in the samples ranged from 12.47 pg/g to 406.56 pg/g (0.71 pg TEQ/g to 23.51 pg TEQ/g, respectively). The most abundant congeners, as TEQ values, were 2,3,4,7,8-PeCDF; 1,2,3,7,8-PeCDF; and 1,2,3,4,7,8-HxCDF in PCDF congeners and 1,2,3,7,8-PeCDD; 1,2,3,6,7,8-HxCDD; and 1,2,3,7,8,9-HxCDD in PCDD congeners. Meanwhile, PCDDs/PCDFs were analyzed in high-temperature-treated samples of natural sea salt alone and natural sea salt to which di-(2-ethylhexyl)phthalate (DEHP) had been added. In the former case, PCDD/PCDF formation was most evident at temperatures near 450 degrees C, the total amount of dioxins was 90.07 pg/g (6.07 pg TEQ/g), and PCDD congeners comprised less than 50% of the total PCDDs/PCDFs. However, when the latter samples were heated, the total PCDD/PCDF concentration was 512.30 pg/g (21.53 pg TEQ/g), with PCDD congeners comprising over 87% of the total PCDDs/PCDFs.     

A critical analysis of earthquakes and urban planning in Turkey

The land use plans and policies of developed countries that live with the threat of earthquakes are gaining importance in reducing or eliminating the long‐term threat to people and property. In developing countries, however, these plans and policies seem to increase the level of vulnerability. This paper examines the effects of the earthquakes that have occurred in Turkey since 1992, with a particular focus on urbanisation and planning policies. It is based on extensive surveys carried out on location immediately after the earthquakes in Erzincan and Kocaeli‐Gölcük in 1992 and 1999, respectively. The analysis takes into account several factors, including the height of buildings, geological conditions and the construction period. The authors conclude that land use planning can serve as a very useful instrument for mitigating the extent of disaster damage if it is part of an appropriate planning system. In the case of Turkey, the planning system needs to be reorganised for this purpose.     

The sorption of hydrogen sulfide from hot syngas by metal oxides over supports

Six 5 wt.% metal sorbents including Mn, Fe, Cu, Co, Ce and Zn supported on gamma-Al2O3, prepared by the incipient wetness impregnation method with calcination at 700 degrees C for 2 h, have been investigated for sorption of hydrogen sulfide in the temperature range of 500-700 degrees C. The sorption experiments were conducted in a fixed-bed reactor in terms of breakthrough curves and characterized by X-ray powder diffraction. The results reveal that the copper and manganese sorbents exhibit the best performance because they provide nearly 100% utilization, but the copper sorbent has a lower sulfur sorption capacity compared with the manganese sorbent. The zinc and cerium sorbents are not good candidates attributed to the vaporization of zinc and unexpected product for cerium. Effects of support materials on 5 wt.% manganese were also investigated by using gamma-Al2O3, SiO2 and TiO2 in this study. Five weight percent Mn/gamma-Al2O3 shows the best performance among support candidates. On the basis of XRPD and BET surface area analysis, TiO2 appears a huge loss in BET surface area associated with a significant formation of rutile form.