Study of heavy metal pollution in seawater of Kepez harbor of Canakkale (Turkey)

In this work, the heavy metals cadmium and lead in Kepez harbor were studied with regard to the determination of the environmental pollution levels. Seawater samples of the Dardanelles (Canakkale Strait) were collected from the nearest station to Kepez harbor in July 2007. Then, the concentrations of these metals were determined after simple pretreatment of samples by the proposed inductively coupled plasma?Catomic emission spectrometry (ICP-AES) method. The analysis of a given sample is completed in about 15 min by the ICP-AES method, and the concentrations of Cd and Pb were found to be 73.80 mg L^???1 (relative standard deviation [RSD], 1.07%) and 9.39 mg L^???1 (RSD, 0.70%), respectively. The accuracy of the applied ICP technique was checked by recovery studies, and good recoveries were obtained. The pollution levels of Cd and Pb recorded in this study were compared with those in other studies to analyze the water sample in Kepez harbor.     

Assessing monthly average solar radiation models: a comparative case study in Turkey

Solar radiation data are required by solar engineers, architects, agriculturists, and hydrologists for many applications such as solar heating, cooking, drying, and interior illumination of buildings. In order to achieve this, numerous empirical models have been developed all over the world to predict solar radiation. The main objective of this study is to examine and compare 147 solar radiation models available in the literature for the prediction of monthly solar radiation at Ankara (Turkey) based on selected statistical measures such as percentage error, mean percentage error, root mean square error, mean bias error, and correlation coefficient. Our results showed that Ball et al. (Agron J 96:391?C397, 2004) model and Chen et al. (Energy Convers Manag 47:2859?C2866, 2006) model performed best in the estimation of solar radiation on a horizontal surface for Ankara.     

Repetitive extragenic palindromic PCR (REP-PCR) as a method used for bulking process detection in activated sludge

Bulking of activated sludge is a world-widely prevalent problem and can lead to loss of bio-oxidation, further deterioration of effluent quality, and even to a complete breakdown of the entire treatment process. Most common reasons of bulking are bacterial community changes, especially excessive growth of filamentous bacteria or excess of biopolymers on surface of non-filamentous microbes. Because of complex nature of the bulking phenomenon, the successful bulking control strategy finding is still a very important need awaiting new options and advices. The repetitive extragenic palindromic PCR (REP-PCR) fingerprinting method has been applied to distinguish bacterial community in non-bulking and bulking activated sludge. The characteristic REP-PCR fingerprinting patterns, using the Ward??s clustering method, have been analyzed to determine homology/similarity relation between particular non-bulking and bulking sludge sampling. The received clustering results were in high concordance with activated sludge typing done based on physicochemical sludge analysis. The choice and application of molecular typing method in sludge analysis will depend upon the needs, skill level, and resources of the laboratory. The proposed REP-PCR method and statistical analysis of fingerprinting patterns seems to be simple, rapid, and effective methods to show differences between population in non-bulking and bulking activated sludge. It is easy to implement, and it may be useful for routinely activated sludge monitoring as well as may be helpful in early detection of bulking process.     

Spatial distribution and human contamination quantification of trace metals and phosphorus in the sediments of Chaohu Lake,a eutrophic shallow lake,China

Distinguishing and quantifying anthropogenic trace metals and phosphorus accumulated in sediment is important for the protection of our aquatic ecosystems. Here, anthropogenic proportion and potential sources of trace metals and phosphorus in surface sediments of Chaohu Lake were evaluated based on the exhaustive geochemical data. The analysis shows that concentrations of major and trace metals, and phosphorus, displayed significant spatial diversity and almost all elements were over the pre-industrial background value, which should be related to the variations of sediment composition partially. Therefore, conservative element normalization was introduced and calculated enrichment factors (EFs) of the elements were referenced highlighting the human contamination. EFs of the major and trace metals, except Zn, Pb, and Cu, were all nearly 1.0, indicating the detrital origin. The EFs of Zn, Pb, Cu and phosphorus were 1.0–10.4, 1.0–3.8, 1.0–4.9, and 1.0–7.6, respectively, showing moderate to significant contamination. Higher EFs of Zn, Pb and Cu occurred in the mouth areas of Nanfei River and Zhegao River, and they decreased to the lake center in the northwest and northeast lake areas, respectively. We deduced that anthropogenic Zn, Pb, and Cu were mainly from urban and industrial point sources and the non-point sources of atmospheric deposition contributed little to their contamination. The EFs of phosphorus showed similar spatial degradation with that of Zn, Pb, and Cu. Moreover, higher EFs (>1) of phosphorus also occurred in other areas adjacent to the river mouths besides Nanfei River and Zhegao River. This indicated that the non-point agricultural source may also be responsible for the contamination of phosphorus in Chaohu Lake in addition to the urban sewage sources. Anthropogenic phosphorus was mainly concentrated in the speciation of NaOH-P, which had higher potential biological effects than the detrital proportion. Concentrations of Zn, Pb and Cu surpassed the threshold effect concentrations (TEC) of consensus-based sediment quality guidelines of freshwater ecosystems, especially in the contaminated northwest area of Chaohu Lake. This highlighted the contributions of anthropogenic contamination to the elevated potential biological effects of trace metals. Though there had been no obvious human contamination of Cr and Ni in Chaohu Lake, concentrations were all over the TECs, which may be due to higher background levels in the parent materials of soils and bedrocks in Chaohu Lake catchment.     

Spatial and temporal estimation of soil loss for the sustainable management of a wet semi-arid watershed cluster

The ungauged wet semi-arid watershed cluster, Seethagondi, lies in the Adilabad district of Telangana in India and is prone to severe erosion and water scarcity. The runoff and soil loss data at watershed, catchment, and field level are necessary for planning soil and water conservation interventions. In this study, an attempt was made to develop a spatial soil loss estimation model for Seethagondi cluster using RUSLE coupled with ARCGIS and was used to estimate the soil loss spatially and temporally. The daily rainfall data of Aphrodite for the period from 1951 to 2007 was used, and the annual rainfall varied from 508 to 1351 mm with a mean annual rainfall of 950 mm and a mean erosivity of 6789 MJ mm ha^?1 h^?1 year^?1. Considerable variation in land use land cover especially in crop land and fallow land was observed during normal and drought years, and corresponding variation in the erosivity, C factor, and soil loss was also noted. The mean value of C factor derived from NDVI for crop land was 0.42 and 0.22 in normal year and drought years, respectively. The topography is undulating and major portion of the cluster has slope less than 10°, and 85.3 % of the cluster has soil loss below 20 t ha^?1 year^?1. The soil loss from crop land varied from 2.9 to 3.6 t ha^?1 year^?1 in low rainfall years to 31.8 to 34.7 t ha^?1 year^?1 in high rainfall years with a mean annual soil loss of 12.2 t ha^?1 year^?1. The soil loss from crop land was higher in the month of August with an annual soil loss of 13.1 and 2.9 t ha^?1 year^?1 in normal and drought year, respectively. Based on the soil loss in a normal year, the interventions recommended for 85.3 % of area of the watershed includes agronomic measures such as contour cultivation, graded bunds, strip cropping, mixed cropping, crop rotations, mulching, summer plowing, vegetative bunds, agri-horticultural system, and management practices such as broad bed furrow, raised sunken beds, and harvesting available water using farm ponds and percolation tanks. This methodology can be adopted for estimating the soil loss from similar ungauged watersheds with deficient data and for planning suitable soil and water conservation interventions for the sustainable management of the watersheds.     

Discriminant analysis for the prediction of sand mass distribution in an urban stormwater holding pond using simulated depth average flow velocity data

The approach of this paper is to predict the sand mass distribution in an urban stormwater holding pond at the Stormwater Management And Road Tunnel (SMART) Control Centre, Malaysia, using simulated depth average floodwater velocity diverted into the holding during storm events. Discriminant analysis (DA) was applied to derive the classification function to spatially distinguish areas of relatively high and low sand mass compositions based on the simulated water velocity variations at corresponding locations of gravimetrically measured sand mass composition of surface sediment samples. Three inflow parameter values, 16, 40 and 80 m³ s^?1, representing diverted floodwater discharge for three storm event conditions were fixed as input parameters of the hydrodynamic model. The sand (grain size?>?0.063 mm) mass composition of the surface sediment measured at 29 sampling locations ranges from 3.7 to 45.5 %. The sampling locations of the surface sediment were spatially clustered into two groups based on the sand mass composition. The sand mass composition of group 1 is relatively lower (3.69 to 12.20 %) compared to group 2 (16.90 to 45.55 %). Two Fisher’s linear discriminant functions, F ₁ and F ₂, were generated to predict areas; both consist of relatively higher and lower sand mass compositions based on the relationship between the simulated flow velocity and the measured surface sand composition at corresponding sampling locations. F ₁?=??9.405?+?4232.119?×?A???1795.805?×?B?+?281.224?×?C, and F ₂?=??2.842?+?2725.137?×?A???1307.688?×?B?+?231.353?×?C. A, B and C represent the simulated flow velocity generated by inflow parameter values of 16, 40 and 80 m³ s^?1, respectively. The model correctly predicts 88.9 and 100.0 % of sampling locations consisting of relatively high and low sand mass percentages, respectively, with the cross-validated classification showing that, overall, 82.8 % are correctly classified. The model predicts that 31.4 % of the model domain areas consist of high-sand mass composition areas and the remaining 68.6 % comprise low-sand mass composition areas.     

Implications of differing input data sources and approaches upon forest carbon stock estimation

Site index is an important forest inventory attribute that relates productivity and growth expectation of forests over time. In forest inventory programs, site index is used in conjunction with other forest inventory attributes (i.e., height, age) for the estimation of stand volume. In turn, stand volumes are used to estimate biomass (and biomass components) and enable conversion to carbon. In this research, we explore the implications and consequences of different estimates of site index on carbon stock characterization for a 2,500-ha Douglas-fir-dominated landscape located on Eastern Vancouver Island, British Columbia, Canada. We compared site index estimates from an existing forest inventory to estimates generated from a combination of forest inventory and light detection and ranging (LIDAR)-derived attributes and then examined the resultant differences in biomass estimates generated from a carbon budget model (Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3)). Significant differences were found between the original and LIDAR-derived site indices for all species types and for the resulting 5-m site classes (p?<?0.001). The LIDAR-derived site class was greater than the original site class for 42% of stands; however, 77% of stands were within ±1 site class of the original class. Differences in biomass estimates between the model scenarios were significant for both total stand biomass and biomass per hectare (p?<?0.001); differences for Douglas-fir-dominated stands (representing 85% of all stands) were not significant (p?=?0.288). Overall, the relationship between the two biomass estimates was strong (R ²?=?0.92, p?<?0.001), suggesting that in certain circumstances, LIDAR may have a role to play in site index estimation and biomass mapping.     

Unusual intraosseous fossilized soft tissues from the Middle Triassic <Emphasis Type="Italic">Nothosaurus</Emphasis> bone

Fossilized soft tissues, occasionally found together with skeletal remains, provide insights to the physiology and functional morphology of extinct organisms. Herein, we present unusual fossilized structures from the cortical region of bone identified in isolated skeletal remains of Middle Triassic nothosaurs from Upper Silesia, Poland. The ribbed or annuli-shaped structures have been found in a sample of partially demineralized coracoid and are interpreted as either giant red blood cells or as blood vessel walls. The most probable function is reinforcing the blood vessels from changes of nitrogen pressure in air-breathing diving reptiles. These structures seem to have been built of extensible muscle layers which prevent the vessel damage during rapid ascent. Such suspected function presented here is parsimonious with results of previous studies, which indicate rarity of the pathological modification of bones associated with decompression syndrome in Middle Triassic nothosaurs.     

Olfaction in a viscous environment: the “color” of sexual smells in <Emphasis Type="Italic">Temora longicornis</Emphasis>

We investigate chemical aspects of mating in the marine copepod Temora longicornis (Copepoda, Calanoidea). Our emphasis is the female pheromone signaling in form of well-defined trails for males to follow, observed in Doall et al. (Phil Trans R Soc Lond B 353:681–689, 1998). The viscous environment and the properties of the odorants play important roles as the spread of the pheromone trail limits the time during which it is useful for tracing. A key observation from our earlier work is the ability of a searching male to detect the direction of the female and to correct its swimming direction if necessary. We propose a simple mathematical model for the spread of a pheromone from a moving source and carry out numerical simulations of two possible detection mechanisms. We find that a searching agent that is capable to detect a ratio outperforms a searcher that depends on the gradient of a single compound. This suggests that copepod sex pheromones consist of blends of chemical compounds, and that a ratio detection mechanism similar to that in airborne insects is at work.     

Are the TTAGG and TTAGGG telomeric repeats phylogenetically conserved in aculeate Hymenoptera?

Despite the (TTAGG)_n telomeric repeat supposed being the ancestral DNA motif of telomeres in insects, it was repeatedly lost within some insect orders. Notably, parasitoid hymenopterans and the social wasp Metapolybia decorata (Gribodo) lack the (TTAGG)_n sequence, but in other representatives of Hymenoptera, this motif was noticed, such as different ant species and the honeybee. These findings raise the question of whether the insect telomeric repeat is or not phylogenetically predominant in Hymenoptera. Thus, we evaluated the occurrence of both the (TTAGG)_n sequence and the vertebrate telomere sequence (TTAGGG)_n using dot-blotting hybridization in 25 aculeate species of Hymenoptera. Our results revealed the absence of (TTAGG)_n sequence in all tested species, elevating the number of hymenopteran families lacking this telomeric sequence to 13 out of the 15 tested families so far. The (TTAGGG)_n was not observed in any tested species. Based on our data and compiled information, we suggest that the (TTAGG)_n sequence was putatively lost in the ancestor of Apocrita with at least two subsequent independent regains (in Formicidae and Apidae).