建设项目竣工环境保护验收监测的工作程序和问题思考

简要介绍了建设项目竣工环境保护验收监测的工作程序,并结合工作实际,对验收监测中遇到的几个问题进行阐述,以利于建设项目竣工验收。     

Chemical and olfactive impacts of organic matters on odor emission patterns from the simulated construction and demolition waste landfills

The explosive increase of construction and demolition waste (CDW) caused the insufficient source separation and emergency disposal at domestic waste landfills in many developing countries. Some organic fractions were introduced to the CDW landfill process and resulted in serious odor pollution. To comprehensively explore the impacts of organic matters on odor emission patterns, five CDW landfills (OIL), with organic matters/ inert CDW components (O/I) from 5% to 30%, and the control group only with inert components (IL) or organics (OL) were simulated at the laboratory. The chemical and olfactive characters of odors were evaluated using the emission rate of 94 odorants content (ER_total), theory odor concentration (TOC_total), and e-nose concentration (ER_ENC), and their correlations with waste properties were also analyzed. It was found that the main contributors to ER_total (IL: 93.0% NH₃; OIL: 41.6% sulfides, 31.0% NH₃, 25.9% oxygenated compounds) and TOC total (IL: 64.1% CH₃SH, 28.2% NH₃; OIL: 71.7% CH₃SH, 24.8% H₂S) changed significantly. With the rise of O/I, ER_total, TOC_total, and ER_ENC increased by 10.9, 20.6, and 2.1 times, respectively. And the organics content in CDW should be less than 10% (i.e., DOC<101.3 mg/L). The good regressions between waste properties (DOC, DN, pH) and ${\mathrm{ER}}_{\stackrel{?}{\mathrm{ENC}}}$ (r=0.86, 0.86, -0.88, p<0.05), ${\mathrm{TOC}}_{\stackrel{?}{\mathrm{total}}}$ (r=0.82, 0.79, -0.82, p<0.05) implied that the carbon sources and acidic substances relating to organics degradation might result in that increase. Besides, the correlation analysis results (${\mathrm{ER}}_{\stackrel{?}{\mathrm{ENC}}}$ vs. ${\mathrm{TOC}}_{\stackrel{?}{\mathrm{total}}}$, r=0.96, p<0.01; vs. ${\mathrm{ER}}_{\stackrel{?}{\mathrm{total}}}$, r=0.86, p<0.05) indicated that e-nose perhaps was a reliable odor continuous monitoring tool for CDW landfills.     

Mechanism of ball milled activated carbon in improving the desalination performance of flow- and fixed-electrode in capacitive deionization desalination

● BACs were used in electrode material for both fixed and flowing electrodes. ● ASAR of FCDI and MCDI was improved by 134% and 17%, respectively. ● ENRS of FCDI and MCDI was improved by 21% and 53%. ● The mechanism of improving desalination performance was analyzed in detail. Capacitive deionization (CDI) is a novel electrochemical water-treatment technology. The electrode material is an important factor in determining the ion separation efficiency. Activated carbon (AC) is extensively used as an electrode material; however, there are still many deficiencies in commercial AC. We adopted a simple processing method, ball milling, to produce ball milled AC (BAC) to improve the physical and electrochemical properties of the original AC and desalination efficiency. The BAC was characterized in detail and used for membrane capacitive deionization (MCDI) and flow-electrode capacitive deionization (FCDI) electrode materials. After ball milling, the BAC obtained excellent pore structures and favorable surfaces for ion adsorption, which reduced electron transfer resistance and ion migration resistance in the electrodes. The optimal ball-milling time was 10 h. However, the improved effects of BAC as fixed electrodes and flow electrodes are different and the related mechanisms are discussed in detail. The average salt adsorption rates (ASAR) of FCDI and MCDI were improved by 134% and 17%, respectively, and the energy-normalized removal salt (ENRS) were enhanced by 21% and 53%, respectively. We believe that simple, low-cost, and environmentally friendly BAC has great potential for practical engineering applications of FCDI and MCDI.     

浓缩脱水污泥水混凝预处理效果及混凝剂的选择

以白龙港污水处理厂浓缩脱水污泥水为处理对象,考察了聚合氯化铝(PAC)对污泥水颗粒物沉降特性和污染物去除效果的影响,比较了PAC、聚合氯化铁(PFC)、阳离子型聚丙烯酰胺(cPAM)和阴离子型聚丙烯酰胺(aPAM)对浓缩脱水污泥水的预处理效果。实验结果表明,PAC的投加可以去除颗粒态污染物和溶解态的磷,但其形成絮体粒径随PAC投加量增大而减小,导致污泥沉降性能恶化。因此,PAC不适合浓缩脱水污泥水的混凝预处理。与PAC相比,投加PFC、cPAM和aPAM均能有效去除颗粒态污染物,并改善污泥水沉降性能,其中cPAM的预处理效果最佳。     

生活垃圾填埋场矿化垃圾分选研究

对上海市老港生活垃圾填埋场填埋龄为1～14年的矿化垃圾进行了分选研究.结果表明,填埋龄在8年以上矿化垃圾细料(粒径＜50 mm)的百分比约占60%,而填埋龄低于5年的矿化垃圾细料比例低于40%.开采出来的垃圾经分选后的产品可得到有效的资源化利用.     

利用生物工程治理印染废水及回用中试研究

利用新研制的固定化微生物技术,将筛选的高效优势脱色菌种固定在活性污泥上,投加于＂厌氧－好氧－生物滤池＂工艺流程中,处理印染废水。试验结果表明：固定化脱色菌－活性污泥显示了极大的优越性,出水COD_Cr<50mg/L_,出水色度0.005～0.05（在波长530nm下的光密度）。处理后的水可回收利用。     

Size and elemental composition of dry-deposited particles during a severe dust storm at a coastal site of Eastern China

Dry-deposited particles were collected during the passage of an extremely strong dust storm in March, 2010 at a coastal site in Qingdao(36.15°N, 120.49°E), a city located in Eastern China. The size, morphology, and elemental composition of the particles were quantified with a scanning electron microscope equipped with an energy dispersive X-ray instrument(SEM–EDX). The particles appeared in various shapes, and their size mainly varied from 0.4to 10 μm, with the mean diameters of 0.5, 1.5, and 1.0 μm before, during, and after the dust storm, respectively. The critical size of the mineral particles settling on the surface in the current case was about 0.3–0.4 μm before the dust storm and about 0.5–0.7 μm during the dust storm. Particles that appeared in high concentration but were smaller than the critical size deposited onto the surface at a small number flux. The elements Al, Si and Mg were frequently detected in all samples, indicating the dominance of mineral particles. The frequency of Al in particles collected before the dust storm was significantly lower than for those collected during and after the dust storm. The frequencies of Cl and Fe did not show obvious changes, while those of S, K and Ca decreased after the dust arrival. These results indicate that the dust particles deposited onto the surface were less influenced by anthropogenic pollutants in terms of particle number.     

土壤有机质测定方法的进展

对土壤有机质测定的3种主要方法及特点和应用范围进行了论述和评价。认为上壤有机质测定方法改进的目标不仅仅是简便、快速、廉价,还应包括无污染。     

Preparation of metal-doped Cu–Mn/HTS-1 catalysts and their mechanisms in efficient degradation of toluene

In order to study their synergistic catalytic effects in toluene degradation, CuMn_2O_4/HTS-1(HTS-1 was a titanium silicon molecular sieve), Cu_(0.7)Mn_2Y_(0.3)O_x/HTS-1 and Cu_(0.7)Mn_2Ce_(0.3)O_x/HTS-1 catalysts were prepared by the impregnation method.The textural properties, redox properties and acidity of the catalysts were characterized by X-ray diffractometer(XRD),transmission electron microscopy(TEM), scanning electron microscopy(SEM), H_2 temperature-programmed reduction(H_2-TPR), X-ray photoelectron spectroscopy(XPS),frustrated total internal reflection(FT-IR), ammonium temperature-programmed desorption(NH_3-TPD) and pyridine adsorption internal reflection(Py-IR) measurements.The potential roles of Lewis acid sites(activating dioxygen) were discussed, and the experimental results indicated that the most efficient route for toluene degradation over Cu_(0.7)Mn_2Ce_(0.3)O_x/HTS-1(toluene conversion rate of 90%(T99) = 295℃) was ascribed to regulation of the synergistic effects of redox properties(activating molecular toluene) and Lewis acid sites(activating dioxygen).The Mars–Van–Krevelen(MVK) model was adopted to describe the reaction process of toluene oxidation, which gave an in-depth view into the toluene degradation over CuMn_2O_4/HTS-1, Cu_(0.7)Mn_2Y_(0.3)O_x/HTS-1 and Cu_(0.7)Mn_2Ce_(0.3)O_x/HTS-1.In addition, the synergistic effects between redox properties and Lewis acid sites were studied in detail.