Planning,governance and rural futures in Australia and the USA: revisiting the case for rural regional planning

Rural regions in post-industrial countries confront significant new challenges, particularly in relation to climate, biodiversity, unconventional resource development and energy. Yet at a time when the contours of these challenges are still being sketched, and preliminary, planned interventions undertaken, the practice of rural planning finds itself at a low ebb. We examine two ‘critical cases’, one each from Australia and the USA, to explore the issues and options for capacity of rural regional planning to surmount these new challenges. Our examination indicates the urgent need for a renewed discourse on rural regional planning.     

A Modeling System to Assess Land Cover Land Use Change Effects on SAV Habitat in the Mobile Bay Estuary

Estuarine ecosystems are largely influenced by watersheds directly connected to them. In the Mobile Bay, Alabama watersheds we examined the effect of land cover and land use (LCLU) changes on discharge rate, water properties, and submerged aquatic vegetation, including freshwater macrophytes and seagrasses, throughout the estuary. LCLU scenarios from 1948, 1992, 2001, and 2030 were used to influence watershed and hydrodynamic models and evaluate the impact of LCLU change on shallow aquatic ecosystems. Overall, our modeling results found that LCLU changes increased freshwater flows into Mobile Bay altering temperature, salinity, and total suspended sediments (TSS). Increased urban land uses coupled with decreased agricultural/pasture lands reduced TSS in the water column. However, increased urbanization or agricultural/pasture land coupled with decreased forest land resulted in higher TSS concentrations. Higher sediment loads were usually strongly correlated with higher TSS levels, except in areas where a large extent of wetlands retained sediment discharged during rainfall events. The modeling results indicated improved water clarity in the shallow aquatic regions of Mississippi Sound and degraded water clarity in the Wolf Bay estuary. This integrated modeling approach will provide new knowledge and tools for coastal resource managers to manage shallow aquatic habitats that provide critical ecosystem services.     

Modeling Streamflow and Water Quality Sensitivity to Climate Change and Urban Development in 20 U.S. Watersheds

Watershed modeling in 20 large, United States (U.S.) watersheds addresses gaps in our knowledge of streamflow, nutrient (nitrogen and phosphorus), and sediment loading sensitivity to mid‐21st Century climate change and urban/residential development scenarios. Use of a consistent methodology facilitates regional scale comparisons across the study watersheds. Simulations use the Soil and Water Assessment Tool. Climate change scenarios are from the North American Regional Climate Change Assessment Program dynamically downscaled climate model output. Urban and residential development scenarios are from U.S. Environmental Protection Agency's Integrated Climate and Land Use Scenarios project. Simulations provide a plausible set of streamflow and water quality responses to mid‐21st Century climate change across the U.S. Simulated changes show a general pattern of decreasing streamflow volume in the central Rockies and Southwest, and increases on the East Coast and Northern Plains. Changes in pollutant loads follow a similar pattern but with increased variability. Ensemble mean results suggest that by the mid‐21st Century, statistically significant changes in streamflow and total suspended solids loads (relative to baseline conditions) are possible in roughly 30‐40% of study watersheds. These proportions increase to around 60% for total phosphorus and total nitrogen loads. Projected urban/residential development, and watershed responses to development, are small at the large spatial scale of modeling in this study.     

Exergetic Sustainability Indicators as a Tool in Commercial Aircraft: A Case Study for a Turbofan Engine

This paper focuses on the exergetic sustainability indicators of a medium-range commercial aircraft engine for constant reference environment and ground running conditions. First, a detailed exergy analysis of turbofan engine have been performed based on engine test cell parameters. Starting from the sustainability considerations and the second law of the thermodynamics, the paper presents six exergy-based sustainability indicators. The indicators of the turbofan engine developed here in conjunction with exergetic analysis and sustainable development are exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index. The investigated sustainable indicators have been calculated by using exergy analysis outputs for aircraft ground running condition. Results from this study show that values of exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index of investigated turbofan engine are found to be 0.315, 0.685, 0.408, 0, 2.174, and 0.460, respectively. These parameters are expected to quantify how the turbofan engine and aircraft become more environmentally benign and sustainable.     

Are we counting what counts? A closer look at environmental concern,pro-environmental behaviour,and carbon footprint

Three parallel lines of inquiry regarding individuals' support for the environment have developed within the environmental social sciences. These include individuals' concern for the environment, research on private sphere pro-environmental behaviour (PEB), i.e. household actions seeking to improve the environment (e.g. buying better light bulbs), and more recently, ecological and carbon footprints. Researchers have noted that the correlates of this third form of support for the environment are not necessarily the same as the predictors of the first two forms. Using Canadian survey data, this study examines the relationships among, and predictors of, all three forms. Evidence that there is not a link between private sphere PEB and household carbon footprints, and that measures of socio-economic status (education and income) have different effects on different types of support for the environment, invites a discussion of whether environmental social scientists are really counting what counts.     

Using GIS to Delineate Headwater Stream Origins in the Appalachian Coalfields of Kentucky

Headwater streams have a significant nexus or physical, chemical, and/or biological connection to downstream reaches. Generally, defined as 1st‐3rd order with ephemeral, intermittent, or perennial flow regimes, these streams account for a substantial portion of the total stream network particularly in mountainous terrain. Due to their often remote locations, small size, and large numbers, conducting field inventories of headwater streams is challenging. A means of estimating headwater stream location and extent according to flow regime type using publicly available spatial data is needed to simplify this complex process. Using field‐collected headwater point of origin data from three control watersheds, streams were characterized according to a set of spatial parameters related to topography, geology, and soils. These parameters were (1) compared to field‐collected point of origin data listed in three nearby Jurisdictional Determinations, (2) used to develop a geographic information system (GIS)‐based stream network for identifying ephemeral, intermittent, and perennial streams, and (3) applied to a larger watershed and compared to values obtained using the high‐resolution National Hydrography Dataset (NHD). The parameters drainage area and local valley slope were the most reliable predictors of flow regime type. Results showed the high‐resolution NHD identified no ephemeral streams and 9 and 65% fewer intermittent and perennial streams, respectively, than the GIS model.     

Effects of initial decomposing leaf litter of Cinnamomum camphora on the growth and physiology of Impatiens balsamina北大核心CSCD

A pot experiment was conducted to study the allelopathic effects of initial decomposing leaf litter of Cinnamomum camphora on growth and physiology of Impatiens balsamina. Three leaf litter treatments included 20, 40 and 80 g of C. camphora leaf litter mixed with 8 kg of soil, namely T1, T2, and T3, respectively. In order to test the effect of leaf litter addition on the permeability and ventilation of soil simultaneously, a parallel trial with steamed leaf litter was conducted with the three treatments of the leaf litter. The leaf litter was steamed for 2 d to remove the secondary metabolites as much as possible, dried, and then mixed with 8 kg of soil, namely Z1, Z2, and Z3, respectively. No leaf litter was added in control (CK). The growth parameters of I. balsamina were determined at the 20 d, 60 d, 100 d and 120 d after sowing and the main physiology indicators were determined at the 60 d. The results indicated that: (1) The ground surface diameter and height of I. balsamina were inhibited significantly at 60 d (P < 0.05). Photosynthetic pigments and gas exchange parameters of I. balsamina were inhibited significantly at 60 d, and the inhibition effect was stronger with increased amount of leaf litter addition. The chlorophyll content, Pn and Ls decreased significantly with increased amount of leaf litter (P < 0.05). The activity of superoxide dismutase (SOD) and peroxidase (POD) in leaves of I. balsamina decreased with the increase of leaf litter addition. The content of MDA in treatments T1, T2 and T3 were all higher than that in CK, which indicated that I. balsamina suffered oxidative damage in a certain degree. The content of free proline (Pro) and soluble sugar (SS) in leaves of I. balsamina decreased significantly with the increase of the leaf litter (P < 0.05), while the content of soluble protein (SP) increased. (2) In the parallel trial, 60 d after sowing, no obvious difference was observed between CK and any steamed leaf litter treatment in terms of the morphological and physiological features stated above (P > 0.05). It indicated that the soil physical properties were not greatly influenced by leaf litter addition in the dose interval designed, or that the release of secondary metabolites from decomposing leaf litter was probably a better reason to explain the inhibition of leaf litter treatment to I. balsamina growth. (3)The compound effect (CE) of leaf litter decomposition on I. balsamina was enhanced with increase of the leaf litter, to 0.169, 0.354, and 0.497, respectively, in treatments of T1, T2 and T3. The study indicated that initial decomposition of C. camphora leaf litter in soil reduces the content of photosynthetic pigments, inhibits photosynthetic capacity and resistance physiology of I. balsamina, weakens its adaptability to the environment, and restrains growth of the plant. © 2015, Science Press. All rights reserved.     

Interspecific and intraspecific identification of Dendrobium based on the psbAtrnH intergenic region sequences and the 5S rRNA gene spacer sequences北大核心CSCD

This research aimed to investigate the interspecific and intraspecific identification of Dendrobium by using the multi-locus method so as to provide a molecular basis for Dendrobium identification through the combination of chloroplast psbA-trnH intergenic region sequences and ribosome 5S rRNA gene spacer sequences. PCR direct sequencing was applied to detect the chloroplast psbA-trnH intergenic region sequences as well as the ribosome 5S rRNA gene spacer sequences of 12 Dendrobium species, while the psbA-trnH intergenic region sequences of Dendrobium denneanum dq-2 variety and dq- 5line were cloned and sequenced for single nucleotide polymorphism (SNP) analyzing. The sequences were analyzed by the software Sequencher4.14, Bioedit7.0, MEGA5.2 and Dansp5.0; the interspecific and intraspecific Kimara-2-Parameter(K2P) distances were also calculated. The phylogenetic tree (using Neighbor joining method) was constructed with Bulbophyllum odoratissimum and Bletilla striata as outgroup. The results showed an average length of chloroplast psbA-trnH gene sequences in Dendrobium as 742.3 bp, with 72 variable sites, including 33 information sites; the average length of the ribosome 5S rRNA gene spacer sequences in Dendrobium was 336.4 bp, with 213 variable sites including 139 information sites. Using psbAtrnH intergenic region sequences in combination with ribosome 5S rRNA gene spacer sequences can not only identify D. denneanum, D. hancockil, D. thysiflorum, D. devonianum, D. moniliforme, D. chrysotoxum, D. officinale, D. heterocarpum and D. nobile, but also differentiate D. officinale from different geographical populations, and distinguish the dq-2 variety and dq 5line with SNP in the multi locus of D. denneanum.     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.