Effects of initial iron corrosion rate on long-term performance of iron permeable reactive barriers: Column experiments and numerical simulation

Column experiments and numerical simulation were conducted to test the hypothesis that iron material having a high corrosion rate is not beneficial for the long-term performance of iron permeable reactive barriers (PRBs) because of faster passivation of iron and greater porosity loss close to the influent face of the PRBs. Four iron materials (Connelly, Gotthart-Maier, Peerless, and ISPAT) were used for the column experiments, and the changes in reactivity toward cis-dichloroethene (cis-DCE) degradation in the presence of dissolved CaCO₃ were evaluated. The experimental results showed that the difference in distribution of the accumulated precipitates, resulting from differences in iron corrosion rate, caused a difference in the migration rate of the cis-DCE profiles and a significant difference in the pattern of passivation, indicating a faster passivation in the region close to the influent end for the material having a higher corrosion rate. For the numerical simulation, the accumulation of secondary minerals and reactivity loss of iron were coupled using an empirically-derived relationship that was incorporated into a multi-component reactive transport model. The simulation results provided a reasonable representation of the evolution of iron reactivity toward cis-DCE treatment and the changes in geochemical conditions for each material, consistent with the observed data. The simulations for long-term performance were also conducted to further test the hypothesis and predict the differences in performance over a period of 40 years under typical groundwater conditions. The predictions showed that the cases of higher iron corrosion rates had earlier cis-DCE breakthrough and more reduction in porosity starting from near the influent face, due to more accumulation of carbonate minerals in that region. Therefore, both the experimental and simulation results appear to support the hypothesis and suggest that reactivity changes of iron materials resulting from evolution of geochemical conditions should be considered in the design of iron PRBs.     

国内外冷却服的发展现状及关键技术

本文论述了国内外冷却服的发展现状,介绍了3种制冷技术路线,指出了其各自的关键技术,有利于人们对冷却服的发展趋势进一步的了解和认识.     

Identification of pollution of Tapeng Lagoon from neighbouring rivers using multivariate statistical method

This work investigated water samples collected from Tapeng Lagoon and three neighbouring rivers (the Kaoping River, Tungkang River and Lingbeng River) in Taiwan, Republic of China. Canonical discriminant analysis was applied to identify the source of pollution in neighbouring rivers outside Tapeng Lagoon. The two constructed discriminant functions showed a marked contribution to all discriminant variables, and the total nitrogen, algae, dissolved oxygen and total phosphate were combined as the nutrient effect factor. The recognition capacities of the two discriminant functions were 95.6% and 4.4%, respectively. The water quality in the Kaoping River most strongly controlled the water quality in Tapeng Lagoon. Disassembling the oyster frames and fishery boxes had improved the water quality markedly. The methodology and results provide useful information concerning watershed management and may be applicable to other basins with similar properties that are experiencing similar coastal environmental issues.     

The contents and forms of solid-phase species of radioactive strontium and cesium in Taiwan soils

This study was to investigate the activities and contents of ¹³⁷Cs in the profiles of selected arable and forest soils in Taiwan and various solid-phase species of ⁸⁵Sr and ¹³⁷Cs in selected arable soils in Taiwan. The gamma (γ) ray spectra of the collected soil samples and some of the soils amended with ⁸⁵Sr and ¹³⁷Cs were measured. The data indicate that the arable soils from Sanhsing series, Sanhsing Township and Chuangwei series, Chuangwei Township, Ilan County, and from Tunglochuan series, Pinglin Township, Taipei County shows significantly higher radioactivity of ¹³⁷Cs (ND − 11.0 ± 0.2 Bq kg⁻¹). Furthermore, the radioactivity of ¹³⁷Cs in the mountain soils (1.24 ± 0.07 − 42 ± 1 Bq kg⁻¹) from Yuanyang Lake Nature Preserve among Ilan, Taoyuan, and Hsinchu Counties is the highest among the investigated mountain forest soils. This may be mainly attributed to the fact that Ilan County is located in the northeastern part of Taiwan and faces the northeastern and northern seasonal winds with lots of precipitation annually from mid-autumn through mid-spring next year and is receiving greater amount of fallouts yearly. Due to longer reaction period (≥3 y) of ¹³⁷Cs with soil components, ¹³⁷Cs was mainly in the forms bound to oxides and to organic matter in the soil amended with ¹³⁷Cs and in the soil contaminated with ¹³⁷Cs. On the contrary, due to shorter reaction period (<60 d) of ⁸⁵Sr with soil components, ⁸⁵Sr was mainly in exchangeable form and partially in the forms bound to carbonates and oxides in the soils amended with ⁸⁵Sr.     

Emissions of polycyclic aromatic hydrocarbons from thermal pre-treatment of waste hydrodesulfurization catalysts

Despite increasing environmental concerns and stringent limitations on the sulfur content in fuels, many waste hydrodesulfurization (HDS) catalysts containing Co, Mo, Ni and V are generated in the petroleum refining process. To recover valuable metals in the waste HDS catalysts via hydrometallurgy, thermal treatment is usually performed first to remove contaminants (residual oil, carbon and sulfur) present on the surface of catalysts. In this study, the mass partitions of polycyclic aromatic hydrocarbons (PAHs) in different media (aqueous, particulate and gaseous) were quantified in order to determine the efficiency of three different air pollution control devices, cooling unit, filter and glass cartridge, on PAH removal. An afterburner and two furnace temperatures were used to observe the effect on the PAH contents of the treated residues. Results show that total-PAH content in treated residues decreased with the pyrolysis temperature of the primary furnace, while those generated in flue gases were destroyed by the afterburner at an efficiency of approximately 95%. In addition, the thermal process converts high molecular weight PAHs to low molecular weight PAHs, and the afterburner temperature involved (1200 degrees C) was high enough to prohibit the generation of high molecular weight PAHs (HM-PAHs), leading to the domination of low molecular weight PAHs (LM-PAHs) in flue gases, while treated residues were dominated by HM-PAHs. Finally, information on metal contents and their concentrations in the Toxicity Characteristic Leaching Procedure in waste HDS catalyst and thermal treated residues are examined as an index of the potential for metal recovery.     

气升式反应器中微生物烟气脱硫研究

基于微生物酸性铁溶液烟气脱硫特性,实验构建了一套内循环气升式反应器.在反应器中,利用处于对数生长期的氧化亚铁硫杆菌(Thiobacillus ferrooxidans)酸性铁溶液进行了模拟烟道气SO2脱除实验研究.为寻求高脱硫率,实验研究了铁离子浓度、入口氧含量、细菌数和pH值的变化对脱硫率的影响.考察了反应液中Fe(Ⅱ)离子浓度的变化规律.实验表明,含T.f菌酸性铁溶液的脱硫效果较高;Fe离子浓度在7.67 g/L左右时脱硫率最佳;入口气中氧含量、反应液中细菌数和pH值越高,反应液的脱硫率也就越高.反应液中的Fe(Ⅱ)离子浓度是一先扬后抑的变化过程.     

基于因子分析法研究太原市土壤重金属污染的主要来源

太原市土壤的研究还处于起步阶段,尚缺乏系统的研究和探讨.基于因子分析法分析研究太原市土壤重金属污染类型及污染来源,在面积性土壤测量基础上,采用城市土壤单点样采集方法,通过测试获得了城市表层土壤中重金属元素(As、Cd、Hg、Pb、Cr、Ni、Zn、Cu)的含量数据;应用统计数手段及处理软件,采用因子分析法对太原市土壤化探数据进行详细分析研究;结合太原市工企分布情况,对比因子分析中的六个主因子,进行整理分析;研究结果充分反映出太原市作为一个典型的重化工基地和燃煤城市的污染特点,表明太原市土壤重金属污染的主要来源有四个方面,即:工矿企业污染源,燃煤污染源,交通污染源,商业活动和居民生活污染源等.     

立体式植物修复受重金属污染农田土壤的探讨

农田土壤遭受重金属污染是江西省乐平市乐安河沿岸的重要环境问题。采用实验小区的方法,研究了乔、灌、草多层次植物对重金属污染地区土壤的修复作用。结果表明,利用木本植物和对重金属吸收较好的草本植物组成立体模式来净化污染面积较大的土壤,效果明显,简便易行,经济效益大,是治理重金属Cu、Cd复合污染的一条新途径。