The QUASIMEME laboratory performance study of polycyclic aromatic hydrocarbons (PAHs): assessment for the period 1996-1999. Quality Assurance of Information in Marine Environmental Monitoring in Europe

The results of the laboratory performance studies held during the period 1996-99 and involving the determination of PAHs in sediments and biota have been assessed. Overall 67% of the data submitted met the QUASIMEME criterion for satisfactory performance, although differences in performance were apparent between the two main analytical techniques employed: gas chromatography and high-performance liquid chromatography. Further development of PAH methodology utilising coupled gas chromatography mass spectrometry is encouraged as the most appropriate means of meeting the future requirements for the determination of a wider range of PAH analytes. More reference materials are also urgently required for use in marine monitoring programmes, and they need to be certified for a wider range of PAHs than hitherto, including both parent PAHs and their alkylated derivatives.     

A hierarchical analysis of terrestrial ecosystem model Biome-BGC: Equilibrium analysis and model calibration

The increasing complexity of ecosystem models represents a major difficulty in tuning model parameters and analyzing simulated results. To address this problem, this study develops a hierarchical scheme that simplifies the Biome-BGC model into three functionally cascaded tiers and analyzes them sequentially. The first-tier model focuses on leaf-level ecophysiological processes; it simulates evapotranspiration and photosynthesis with prescribed leaf area index (LAI). The restriction on LAI is then lifted in the following two model tiers, which analyze how carbon and nitrogen is cycled at the whole-plant level (the second tier) and in all litter/soil pools (the third tier) to dynamically support the prescribed canopy. In particular, this study analyzes the steady state of these two model tiers by a set of equilibrium equations that are derived from Biome-BGC algorithms and are based on the principle of mass balance. Instead of spinning-up the model for thousands of climate years, these equations are able to estimate carbon/nitrogen stocks and fluxes of the target (steady-state) ecosystem directly from the results obtained by the first-tier model. The model hierarchy is examined with model experiments at four AmeriFlux sites. The results indicate that the proposed scheme can effectively calibrate Biome-BGC to simulate observed fluxes of evapotranspiration and photosynthesis; and the carbon/nitrogen stocks estimated by the equilibrium analysis approach are highly consistent with the results of model simulations. Therefore, the scheme developed in this study may serve as a practical guide to calibrate/analyze Biome-BGC; it also provides an efficient way to solve the problem of model spin-up, especially for applications over large regions. The same methodology may help analyze other similar ecosystem models as well.     

Turbulence characteristics of 45° inclined dense jets

Environmental Fluid Mechanics - In the present study, we performed an extensive laboratory investigation to quantify the turbulence characteristics of 45° inclined dense jets using Particle...     

Organochlorine contaminants in Caspian and harbour seal blubber

Organochlorine contaminants (pesticides and individual polychlorinated biphenyl congeners, PCBs) were measured in Caspian (Phoca caspica) seal blubber and compared with concentrations in Harbour (Phoca vitulina) seal blubber. Concentrations of total dichlorodiphenyltrichloroethane (DDT) and its metabolites were significantly higher in Caspian seal than Harbour seal samples, whereas PCB congeners were significantly higher in Harbour than Caspian seals. Our finding suggests that Caspian seals are exposed to high levels of DDT pesticides. In contrast, PCBs are circulating in this population at much lower levels than in marine mammals from the North Sea.     

The Analysis of Tecnazene (2,3,5,6-Tetrachloronitro-benzene) and its Metabolites in Water and Fish

A method for the analysis of Tecnazene (2,3,5,6-tetrachloronitrobenzene) and its major metabolites (2,3,5,6-tetrachloroaniline and 2,3,5,6-tetrachlorothioanisole) is presented. This rapid analytical technique was developed to measure these compounds in samples of water and fish produced during the course of toxicological investigations. Water samples were extracted into hexane and analysed by high resolution capillary gas chromatography using flame ionisation detection (HRGC-FID). Fish samples were extracted into hexane, cleaned up on a short alumina micro-column and also analysed by HRGC-FID.     

Polybrominated diphenyl ethers in two species of marine top predators from England and Wales

During an earlier study, polybrominated diphenyl ethers were detected at high concentrations in fish and sediments downstream of a manufacturing site in NE England. We have now undertaken analysis of 14 tri- to heptabromodiphenyl ether congeners in tissues of two species of marine top predators exposed to these compounds through their consumption of fish. In this paper we report data for 47 cormorants and 60 harbour porpoises from England and Wales, sampled during the period 1996-2000. Concentrations of the summed congeners ranged from 1.8 to 140 microg kg(-1) wet weight in cormorant livers, and from not detected to 6900 microg kg(-1) wet weight in porpoise blubber. The major congeners present were generally BDE47, BDE99 and BDE100. There was little correlation between concentrations of chlorobiphenyls (as the sum of 25 individual congeners) and the sum of the 14 BDE congeners determined, particularly for the porpoises.     

Levels of short and medium chain length polychlorinated n-alkanes in environmental samples from selected industrial areas in England and Wales

Electron capture or negative ion chemical ionisation gas chromatography-mass spectrometry was employed to measure concentrations of short and medium chain length polychlorinated n-alkanes extracted from samples of water, river sediment, benthos, fish, soil, digested sewage and earthworms. Analysis of samples from 20 aquatic and eight agricultural sites indicated that short and medium chain length polychlorinated alkanes were present in the following concentration ranges: sediment < 0.2-65.1 mg/kg dry weight, water < 0.1-1.7 micrograms/l, fish < 0.1-5.2 mg/kg wet weight, benthos < 0.05-0.8 mg/kg wet weight, digested sewage 1.8-93.1 mg/kg dry weight, soil < 0.1 mg/kg dry weight, and earthworms < 0.1-1.7 mg/kg wet weight. It is clear from this study that these compounds are widely distributed in the UK environment, although it is not yet possible to fully assess the risks posed to either wildlife or humans by their continued use. Further study of these compounds is indicated.     

Mechanical, Thermal and Water Absorption Properties of Kenaf-Fiber-Based Polypropylene and Poly(Butylene Succinate) Composites

The use of composites made from non-biodegradable conventional plastic materials (e.g., polypropylene, PP) is creating global environmental concern. Biodegradable plastics such as poly(butylene succinate) (PBS) are sought after to reduce plastic waste accumulation. Unfortunately, these types of plastics are very costly; therefore, natural lignocellulosic fibers are incorporated to reduce the cost. Kenaf fibers are also incorporated into PP and PBS for reinforcing purposes and they have low densities, high specific properties and renewable sourcing. However without good compatibilization, the interfacial adhesion between the matrix and the fibers is poor due to differences in polarity between the two materials. Maleic anhydride-grafted compatibilizers may be introduced into the system to improve the matrix-fiber interactions. The overall mechanical, thermal and water absorption properties of PP and PBS composites prepared with 30 vol.% short kenaf fibers (KFs) using a twin-screw extruder were being investigated in this study. The flexural properties for both types of composites were enhanced by the addition of compatibilizer, with improvements of 56 and 16 % in flexural strength for the PP/KF and PBS/KF composites, respectively. Good matrix-fiber adhesion was also observed by scanning electron microscopy. However, the thermal stability of the PBS/KF composites was lower than that of the PP/KF composites. This result was confirmed by both DSC and TGA thermal analysis tests. The water absorption at equilibrium of a PBS composite filled with KFs is inherently lower than of a PP/KF composite because the water molecules more readily penetrate the PP composites through existing voids between the fibers and the matrix. Based on this research, it can be concluded that PBS/KF composites are good candidates for replacing PP/KF composites in applications whereby biodegradability is essential and no extreme thermal and moisture exposures are required.