Dynamique du phytoplancton et matière organique particulaire dans la zone euphotique de l'Atlantique Equatorial

At two fixed stations in the Equatorial Atlantic Ocean (0°–4° W), the physical, chemical and biological properties of the euphotic layer were determined for 14 d (Station A: 5–18 February, 1979) and 13 d (Station B: 20 October–7 November, 1979), respectively. The stability of the water column allowed comparison of 3 different “systems”: (i) a well-illuminated and nitrate-depleted mixed layer; (ii) a chlorophyll maximum layer (chl a _max) in the thermocline which is poorly illuminated (6.3% of surface irradiance); (iii) a well-illuminated but nitrate-rich (>0.9 μg-at l^-1) mixed layer. In each layer the particulate organic carbon (COP), nitrogen (NOP) and phosphorus (POP) contents were measured and compared with the phytoplankton biomass. In the chlorophyll maximum layer, the phytoplankton biomass contributed significantly to the total particulate organic matter (between 55 and 75%). In the nitrate-depleted mixed layer, the results varied according to whether the regression technique [COP=f(chl a)] was used, or the chl a synthesis during the incubation of the samples. With the former technique, the phytoplankton carbon (C _p) content appeared minimal, because the y intercept, computed using all the data of the water column, was probably overestimated for this layer. POP would be more associated with living protoplasm than with carbon and nitrogen in the three layers. In the chlorophyll a maximum layer it constitutes a valuable detritus-free biomass measurement, since 80% of the POP consist of phytoplankton phosphorus. The assimilation numbers (NA=μg C μg chl a ^-1 h^-1) were high in all three layers, but the highest values were recorded in the nitrate-depleted mixed layer (NA=15 μg C μg chl a ^-1 h^-1). In the chlorophyll maximum layer, light would be a limiting factor during incubation: between 10²⁵ and 8.10²⁴ quanta m^-2 d^-1 NA and light are positively correlated independant of nitrate concentration. The growth rates of phytoplankton (μ) were estimated and compared to the maximum expected growth rate. Our main conclusion was that despite very low biomass and nutrient content, the mixed layer was in a highly dynamic state, as evidenced by high rates of phytoplankton growth and short nutrient turnover times (1 d or less for PO-P₄ in the mixed layer versus 3 d in the thermocline). The presence of nitrate in the water column allows the development of a higher phytoplankton biomass but does not increase growth rate.     

Contribution of the gasoline distribution cycle to volatile organic compound emissions in the metropolitan area of Mexico City

Gasoline distribution in the metropolitan area of Mexico City (MAMC) represents an area of opportunity for the abatement of volatile organic compound (VOC) emissions. The gasoline distribution in this huge urban center encompasses several operations: (1) storage in bulk and distribution plants, (2) transportation to gasoline service stations, (3) unloading at service stations' underground tanks, and (4) gasoline dispensing. In this study, hydrocarbon (HC) emissions resulting from breathing losses in closed reservoirs, leakage, and spillage from the operations just listed were calculated using both field measurements and reported emission factors. The results show that the contribution of volatile HC emissions due to storage, distribution, and sales of gasoline is 6651 t/year, approximately 13 times higher than previously reported values. Tank truck transportation results in 53.9% of the gasoline emissions, and 31.5% of emissions are generated when loading the tank trucks. The high concentration of emissions in the gasoline transportation and loading operations by tank trucks has been ascribed to (1) highly frequent trips from distribution plant to gasoline stations, and vice versa, to cope with excessive gasoline sales per gasoline station; (2) low leakproofness of tank trucks; and (3) poor training of employees. In addition, the contribution to HC evaporative and exhaust emissions from the vehicles of the MAMC was also evaluated.     

Interaction between components of electroplating industry wastes. Influence of the receiving water on the toxicity of the effluent

A copper-cadmium-nickel-zinc mixture was assessed in seven different river waters to study metal toxicity to the ciliate protozoan Colpidium campylum, the interactions occurring between metals, and the influence of the receiving water on toxicity. In the range of concentrations tested, which are representative of electroplating industry wastes, the main part of the toxicity can be attributed to copper and to cadmium-copper synergy. A classification of waters, based on a principal component analysis (PCA), was used to examine the main parameters of the water, which can affect the toxicity of metal mixtures. It appears that the mineralization of the water, more than the total organic carbon (TOC), is an important parameter for the expression of toxicity. A strategy for the estimation of ecotoxicological hazard assessment, based on a simplified factorial experiment is proposed. It enables one to study, in a two-step bioassay, the toxicity of an effluent, the influence of river water on its toxicity, and the effects of contact time and dilution. By applying PCA to data from very different waters, it may be possible to estimate the ecotoxicological risk associated with the discharge of an effluent, on the basis of the chemistry of the receiving water.     

Removal of arsenic(V) from aqueous solutions using iron-oxide-coated modified activated carbon.

Removal of arsenic(V) from aqueous solutions was evaluated with the following three different sorption materials: coal-based activated carbon 12 x 40 (activated carbon), iron(II) oxide (FeO)/activated carbon-H, and iron oxide. The apparent characteristics and physical chemistry performances of these adsorbents were investigated by X-ray diffraction, nitrogen adsorption, and scanning electronic microscope. Also, batch experiments for arsenic removal were performed, and the effects of pH value on arsenic(V) removal were studied. The results suggest that the main phases of the iron oxide surface are magnetite, maghemite, hematite, and goethite; fine and uniform iron oxide particles can cover activated carbon surfaces and affect the surface area or pore structures of activated carbon; adsorption kinetics obey a pseudo-first-order rate equation; and adsorption capacities of adsorbents are affected by the values of pH. The optimum value of pH for iron oxide lies in a narrow range between 4.0 and 5.5, and arsenic(V) removal by FeO/activated carbon-H is ideal and stable in the pH range 3 to 7, while activated carbon has the lowest adsorption capacity in the entire pH range. Also, the adsorption characteristics of FeO/activated carbon-H composites and virgin activated carbon match well the Langmuir adsorption model, while those of iron oxide fit well the Freundlich adsorption model.     

Real-time black carbon personal exposure levels in microenvironments: Home to home on a round-trip,Hanoi–Singapore

Little is known about personal exposure levels of black carbon (BC), a fraction of PM2.5, specifically in the transport microenvironments. In this study, real-time personal exposure to BC recorded by a portable microAeth AE51 was investigated in microenvironments in a round-trip from Hanoi (Vietnam) directly to Singapore. Personal exposure to BC was monitored in microenvironments at residential flat, in various surface modes of transport (taxi, bus, train), at the airports, and on the airplanes. The study found that personal exposure levels of BC in Singapore were higher than those in Hanoi for the same type of microenvironment in general for most of the microenvironments, except for smoking rooms. The highest exposures in each city were in smoking room in Noi Bai International Airport (NIA) and at bus station in Singapore, reached 98,709 ng/m3 and 44,513 ng/m3, respectively; the lowest personal exposure level was in-flight (approximately 250 ng/m3) for both trips. It is also remarkable that personal exposure to BC in indoor microenvironments was higher than outdoor levels.

Implications: Real-time personal exposure to BC was investigated in microenvironments in a round trip from Hanoi (Vietnam) directly to Singapore. BC personal exposure levels in Singapore were higher than those in Hanoi for the same type of microenvironment except for smoking rooms. Personal exposure to BC levels in indoor microenvironments was higher than in outdoor microenvironments. The highest levels of exposure were 98,709 ng/m3 in the smoking room at Noi Bai International Airport (Hanoi) and 44,513 ng/m3 at the bus station in Changi (Singapore). The lowest BC level was in-flight for both trips, at approximately 250 ng/m3.     

Photocatalytic degradation of atrazine by porphyrin and phthalocyanine complexes

This study principally focused on a new kind of photochemical reaction catalyst: porphyrin and phthalocyanine complexes. In a first step, the preparation of the catalysts was optimized. A resin has been chosen to be the support of the complexes. Efficiency of catalytic activity is performed on the degradation of a pesticide: atrazine. The best atrazine degradation occurs with 4.6% of complexes versus substrate. The role of the surface has also been shown to be important. Then, their performances were demonstrated in terms of kinetics and degradation routes, compared to a classical catalyst: titanium dioxide. This study seeks to assess the efficiency of these systems both in a mercury lamp reactor and under solar irradiation which reduces energy costs. The best atrazine degradation half-life found for the complexes is about 200 min with the iron phthalocyanine. These catalysts exhibit particular oxidation activities. Indeed, the degradation routes have been found different between the semi-conductor and the metallic complexes. These complexes are able to cleave the triazinic ring more efficiently than the titanium dioxide.     

滇池底泥微生物菌群对微囊藻毒素的生物降解

采用滇池水华蓝藻中提取提纯的微囊藻毒素（microcystins，MCs）作为微生物生长的碳源和氮源，从长期暴露于蓝藻水华的滇池底泥中，通过从含低浓度到高浓度MCs的逐步培养驯化，获得了高效降解MCs的微生物混合菌群，在初始MC-RR和LR浓度大约分别为50mg／L和30mg／L下，3d内可将MCs全部降解。进一步活性研究显示，不同含碳和含氮化合物虽然能够促进混合微生物菌群的生长，但对降解MCs却无明显的促进作用，说明MCs既可以作为微生物生长的碳源，又可以作为微生物生长的氮源，在富含有机物的天然水体中并不一定能够促进微生物对MCs的生物降解。     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Ultrastructure of the gill of the hydrothermal-vent mytilid Bathymodiolus sp.

Specimens of Bathymodiolus sp. were collected at 2 620 m depth during the Biocyarise Cruise (12°5880N; 13°5660W) in March 1984, and samples of the gill were fixed for ultrastructural observations. The gill of this hydrothermal-vent mytilid constitutes the main organ in the nutritional processes. The lamellae display abundant ciliation, normally comprised of frontal cilia, compound latero-frontal cirri and lateral cilia. At the ventral margin of each demi-branch, a longitudinal, ciliated, feeding groove is present. the lamellae are composed of numerous homorhabdic filaments connected by tufts of cilia. Each filament is made of a thin wall overlying a central lumen containing amoebocytes. Ultrastructural observations revealed the filament wall to be composed of four types of cells: (1) The ciliated cells of the frontal, latero-frontal and lateral ciliation, characterized by an abundance of mitochondria. (2) Mucous cells present to some degree among the ciliated cells, but more abundant on the distal edge and containing dense droplets of mucus. (3) Cells colonized at their apical pole by numerous bacteria enclosed in membrane-delimited clear spaces and composing the major part of the filament wall. (4) Thin ciliated cells separating the bacterial cells and characterised by a dense fringe of microvilli at their apical pole. The lumen of the filament contains amoebocytes of different morphological aspects which seem to accumulate electron-dense granules, possibly related to detoxification processes.     

An examination of photosynthetic production,excretion of photosynthetic products,and heterotrophic utilization of dissolved organic compounds with reference to results from a coastal subtropical sea

The rate of primary production, excretion of photosynthetic products and turnover of glucose and amino acids was measured at a station in a coastal region in the Bahamas. Over the depths 0 to 50 m, total photosynthetic rates varied from 1.7 to 12.7 gC fixed 1^-1day^-1, averaging 4.3. The extent of extracellular photosynthetic products ranged from undetectable to 23%, averaging 6.9%. Neither the field data nor studies with axenic cultures of Dunaliella tertiolecta, Skeletonema costatum, and Monochrysis lutheri showed any evidence of an increase in the percentage excretion at low population densities or low photosynthetic rates. Rates of amino acid turnover varied from 21 to 168% day^-1, and that of glucose from 8.3 to 41% day^-1. Light seems to have little effect on the uptake and respiration of these substrates by the planktonic population. There was a significant relationship between the fraction of the substrate used for respiration and that retained by the cell. On average, 42% of the glucose taken up was respired and 21% of the amino acid mixture. Tentative calculations suggest that the production of dissolved organic material as extracellular photosynthetic products would be insufficient to supply the heterotrophic population, and it was concluded that some other route(s) must be of major importance.