Improvements of nano-SiO2 on sludge/fly ash mortar

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.     

Variations of metal distribution in sewage sludge composting

In the study, the variations of heavy metal distributions (of Cu, Mn, Pb, and Zn) during the sewage sludge composting process were investigated by sequential extraction procedures. The total content of Cu and Zn in the composted mixture increased after the composting process. Mn and Zn were mainly found in mobile fractions (exchangeable fraction (F1), carbonate fraction (F2), and Fe/Mn oxide fraction (F3)). Cu and Pb were strongly associated with the stable fractions (organic matter/sulfides fraction (F4) and residual fraction (F5)). These five metal fractions were used to calculate the metal mobility (bioavailability) in the sewage sludge and composted mixture. The mobility (bioavailability) of Mn, Pb, and Zn (but not Cu) increased during the composting process. The metal mobility in the composted mixture ranked in the following order: Mn>Zn>Pb>Cu.     

Short-term effects of gaseous pollutants on cause-specific mortality in Wuhan, China

In Asia, limited studies have been published on the association between daily mortality and gaseous pollutants of nitrogen dioxide (NO2), ozone (O3), and sulfur dioxide (SO2). Our previous studies in Wuhan, China, demonstrated long-term air pollution effects. However, no study has been conducted to determine mortality effects of air pollution in this region. This study was to determine the acute mortality effects of the gaseous pollutants in Wuhan, a city with 7.5 million permanent residents during the period from 2000 to 2004. There are approximately 4.5 million residents in Wuhan who live in the city's core area of 201 km2, where air pollution levels are highest, and pollution ranges are wider than the majority of the cities in the published literature. We used the generalized additive model to analyze pollution, mortality, and covariate data. We found consistent NO2 effects on mortality with the strongest effects on the same day. Every 10-microg/m3 increase in NO2 daily concentration on the same day was associated with an increase in nonaccidental (1.43%; 95% confidence interval [CI]: 0.87-1.99%), cardiovascular (1.65%; 95% CI: 0.87-2.45%), stroke (1.49%; 95% CI: 0.56-2.43%), cardiac (1.77%; 95% CI: 0.44-3.12%), respiratory (2.23%; 95% CI: 0.52-3.96%), and cardiopulmonary mortality (1.60%; 95% CI: 0.85-2.35%). These effects were stronger among the elderly than among the young. Formal examination of exposure-response curves suggests no-threshold linear relationships between daily mortality and NO2, where the NO2 concentrations ranged from 19.2 to 127.4 microg/m3. SO2 and O3 were not associated with daily mortality. The exposure-response relationships demonstrated heterogeneity, with some curves showing nonlinear relationships for SO2 and O3. We conclude that there is consistent evidence of acute effects of NO2 on mortality and suggest that a no-threshold linear relationship exists between NO2 and mortality.     

底泥中重金属毒性的室内孔隙水分析技术

根据孔隙水中重金属的浓度可以判定底泥中重金属的毒性但获得真正的底泥孔隙水十分困难。本文提供了一套简便易行的室内原状孔隙水取样技术,将碳化硅砂芯埋入底泥,添加表层水并静置９０ｄ,通过渗滤获得孔隙水,测定孔隙水中重的浓度,所得结果与微生态系统暴露试验中生物指示的重金属的毒性大小相吻合,与生物积累重金属的浓度显著正相关。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

直升机腐蚀原因分析及全寿命周期防护技术

通过直升机实际使用过程中暴露的腐蚀问题,分析了直升机全寿命期的腐蚀防护应对方法和思路。对陆地环境和海洋环境使用直升机的腐蚀情况进行了汇总,并对直升机典型腐蚀问题及改进措施进行了研究。在此基础上,进一步分析了导致直升机发生腐蚀的环境、设计、生产、制造、维护等原因,总结了直升机易腐蚀部位、腐蚀特点以及危害性。提出了采用“设计保证、生产实现、维护保持”的综合手段来提升直升机全寿命期的腐蚀防护能力。最后,对外场维护维修过程中需要重点关注的腐蚀控制手册、清洗、涂镀层修复、密封剂/缓蚀剂等问题进行了思考和分析,提出了需加快推进先进的防腐技术在直升机防腐中的应用,对有效开展直升机全寿命周期的腐蚀防护工作具有一定指导意义。     

试论居民有机生活垃圾处置的最佳模式

垃圾分类收集基础上的资源化再利用是处理城市固体废弃物的可行思路,但分类处置在哪种环节操作更具有合理性困惑着管理者的实际选择。为此,本文以上海为例,基于浦东新区"十二五"生活垃圾分类减量专项规划,对小区生化处理机源头消纳与分类收集集中生化处置模式进行了成本收益分析,指出当前适于居民有机垃圾分类减量的最佳模式仍是分类收集集中生化处置模式。只有当居民按量计征垃圾收费等对群体激励的制度出台后才有望驱动小区生化处理机使用。     

陇中黄土丘陵地区农村生活能源消费的环境经济成本分析

陇中黄土丘陵地区经济贫困、环境脆弱、生活能源短缺,生物质过量消费成为生态环境退化的重要驱动因素。论文通过问卷调查获取相关数据,并建立计量模型,基于替代性分析估算了不同用能结构情景下的环境经济成本。结果表明,现状户均生活能源消费2 112.44kgce/a,人均428.59kgce/a,用能水平较低。目前农户消费能源选择的主要依据是能源的现金支出和可获得性。与农户现状用能结构相比较,4种替代结构的能源消费总成本、环境成本、经济成本及现金支出差异较大。利用沼气和太阳能的结构各项成本低,应是今后农村能源建设的方向。     

低碳经济背景下地方政府环境政策执行力调控研究

环境政策执行力与低碳经济发展之间相互促进、相互推动。目前我国已形成较完整的环境政策体系,但在实际执行中并未取得应有的成效。参考国内外已有的地方政府环境政策执行力调控经验,分析环境政策执行力影响因素,从管理体制、诱导制度、监督制度、执行主体自身建设等多个角度提出在低碳经济背景下我国地方政府环境政策执行力调控策略。     

操作条件对UF&RO工艺制取纯水效率的影响

采用UF＆RO膜组合工艺制取纯水,考察各项操作条件对系统效率的影响.结果表明,自来水经UF＆RO膜组合工艺装置的出水满足试验纯水水质要求.对于UF系统,冲洗频率、过滤方式和操作压力均影响系统的制水效率.冲洗频率越大,制水效率越高;各种过滤方式中,死端过滤效率最高;在一定范围内,操作压力升高,制水效率反而下降.对于RO系统,应根据出水水质要求,选择合适的回收率和操作压力.