生物柴油的碳烟形貌及影响因素分析

使用热场发射扫描电子显微镜拍摄了5种生物柴油和0号柴油在常温常压状态下燃烧产生的碳烟照片,分析了碳烟粒子的形貌及影响形貌和生成量的因素。研究表明,碳烟粒子多呈球状,平均直径在35～75nm之间,粒径分布符合高斯分布,总体排列呈现链状或者块状;碳烟形貌及生成量与火焰温度、燃料的氧含量、芳香烃含量、硫含量以及十六烷值等因素有关,与柴油相比,生物柴油燃烧火焰温度高、含氧量高、芳香烃和硫含量少,十六烷值高,使生物柴油的碳烟粒径普遍较小,整体排列更紧密,粘结程度更强。     

石化行业水环境污染事件分级初探

为规范应急管理工作,提高突发事件的应急救援反应速度和协调水平,增强综合处置重特大事件的能力,预防和控制次生灾害的发生,保障企业员工和公众的生命安全,最大限度地减少财产损失、环境破坏和社会影响,中国石化制定了《中国石化重特大事件应急预案》。     

UV-Fenton法处理中药废水的研究

采用UV-Fenton技术对中药废水进行氧化处理,对主要影响因素及其对废水处理效果的影响进行了实验研究。主要考察了废水pH、H2O2投加量,Fe2＋投加量,Fe2＋/H2O2投加比、温度等对废水中CODcr去除率的影响。实验结果表明,在pH=3.83,H2O2投加量为1倍理论投加量Qth,Fe2＋投加量为7.9×10-3mol.l-1,Fe2＋：H2O2=1：27,23℃的情况下反应80 min后CODcr去除率达到80.25%,UV-Fenton氧化系统对中药废水有比较好的处理效果,改善了废水的可生化性,有利于进一步进行生化处理。     

Characterizing spatial distribution and sources of heavy metals in the soils from mining-smelting activities in Shuikoushan, Hunan Province, China

The spatial variation of heavy metals in the soils in Shuikoushan mining-smelting area, Hunan Province, China, was investigated using multivariate and geo-statistic analysis. A total of 106 composite soil samples were collected in an area of about 100 km2. Concentrations of total As, Cd, Pb, Zn, Cu and Cr were measured using inductively coupled plasma mass spectrometry (ICP-MS). Arsenic and Pb were found to have a common source, indicating the same sources and spreading processes, such as aerosols and airborne particulates from smelting chimneys. Airborne sources from smelting chimneys contributed greatly to Cd in the area, which demonstrated the same dispersion pattern as As and Pb. However, two hot spots of Cd around smelters were possibly enlarged by wastewaters, demonstrating another important source of Cd in Shuikouhsan. Geo-statistic interpolated mapping demonstrated that hotspots of Zn were only found proximal to the large smelters, suggesting that Zn primarily came from the chimneys of larger smelters. The major Cu hot-spots appeared closely to the tailing dam, indicating that weathering and leaching of tailings were the major sources of Cu contamination in Shuikoushan. Our findings indicated that airborne volatile particles and aerosols contributed the most to As, Cd, Pb, Zn and Cu contamination, while Cd and Cu may also derive from the discharge of wastewater from smelters and the leaching of tailings, respectively.     

Isolation of marine benzo[a]pyrene-degrading Ochrobactrum sp. BAP5 and proteins characterization

A bacterial strain BAP5 with a relatively high degradation ability of benzo[a]pyrene (BaP) was isolated from marine sediments of Xiamen Western Sea, China and identified as Ochrobactrum sp. according to 16S rRNA gene sequence as well as Biolog microbial identification system. Strain BAP5 could grow in mineral salt medium with 50 mg/L of BaP and degrade about 20% BaP after 30 d of incubation. Ochrobactrum sp. BAP5 was able to utilize other polycyclic aromatic hydrocarbons (PAHs) (such as phenanthrene, pyrene and fluoranthene) as the sole carbon source and energy source, suggesting its potential application in PAHs bioremediation. The profile of total soluble protein from Ochrobactrum sp. BAP5 was also investigated. Some over- and special-expressed proteins of strain BAP5 when incubated with the presence of BaP were detected by two-dimensional polyacrylamide gel electrophoresis, and found to be related with PAHs metabolism, DNA translation, and energy production based on peptide fingerprint analysis through matrix-assisted laser desorption/ionization-time of flight mass spectrometry.     

温度对好氧颗粒污泥吸附铅离子的影响

由活性污泥培养得到好氧颗粒污泥,研究了温度对好氧颗粒污泥吸附Pb²⁺的影响.结果表明,好氧颗粒污泥主要含有C、H、N、O、P等元素,其经验结构式为C_5.7H_10.9O3.9NS_0.04.好氧颗粒污泥表面主要由球状细菌组成,具有明显的孔隙结构.在20～40℃时,Pb²⁺在好氧颗粒污泥上的吸附过程可以由Langmuir和Freundlich等温方程进行拟合（R²>0.914）.Pb2+最大吸附量Qmax由80.65 mg·g-1（20℃）增至97.09　mg·g-1（40℃）.吸附过程的表观自由能变ΔG<0、 ΔH>0、 ΔS>0,表明Pb2+在好氧颗粒污泥表面的吸附为吸热、熵增的自发过程.红外扫描分析(FTIR)结果表明,吸附过程Pb2+主要与—OH、蛋白质中的—COOH以及PO发生作用,与含氮官能团无关.     

CIBR污泥吸附有机物机理及应用

通过吸附实验考察连续流间歇生物反应器(CIBR)中污泥对有机物的吸附效果及吸附类型,分析好氧、缺氧和厌氧环境对污泥吸附有机物能力的影响,进而探讨污泥的吸附能力在CIBR实现有机物高效去除中的作用.实验结果表明,污泥对有机物的吸附主要是物理吸附.好氧/缺氧/厌氧环境对活性污泥及其灭活污泥吸附有机物能力影响不大,各环境下平均吸附率分别达到54.09％和48.62％.污泥良好的吸附能力及其先吸附后生物降解的特性,保证了CIBR混合液中COD值始终低于30 mg/L.     

SAFUIT/UF6环境评价模型验证与应用

作为核燃料循环过程中一种兼具辐射危害和化学毒性的中间产物,UF6的泄漏事故,特别是事故的环境评价技术越来越受到人们的重视.SAFUIT/UF6是专门针对此类事故的环境评价模型,目前已经开展了初步的验证工作.根据1987年法国UF6释放实验条件,对SAFUIT/UF6模型计算结果进行了误差分析,并与HG-SYSTEM/UF6模型进行了对比.初步认为SAFUIT/UF6模型可准确地模拟UF6扩散.此外,SAFUIT/UF6模型在某设施核事故应急评价系统中也得到了应用.     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

柴油/碳酸二甲酯燃烧颗粒的微观结构和分形特征

为降低柴油机颗粒物排放,探讨了柴油机燃用柴油/碳酸二甲酯混合燃料燃烧颗粒微观结构和分形特征的变化规律. 采用扫描电镜、透射电镜和SAXS(同步辐射小角X射线散射)相结合的方法,针对DMC(碳酸二甲酯)添加量(以w计)对柴油机燃烧颗粒微观结构和分形特征参数的影响规律进行了研究. 结果表明:与柴油燃烧颗粒相比,D10〔w(DMC)为10%〕、D20〔w(DMC)为10%〕燃烧颗粒的碳粒子平均层面间距分别增加了5.3%、15.1%,弯曲度平均值分别增加了4.0%和10.3%,表明燃烧颗粒的氧化活性增加;与柴油相比,D10、D20燃烧颗粒的质量分形维数分别增加了0.44和0.52,下限均升高了0.2,SAXS与电镜图像对燃烧颗粒的质量分形维数的分析结果相一致,即质量分形维数随DMC添加量的增加而升高,表明燃烧颗粒的团聚程度提高;与柴油燃烧颗粒相比,D10、D20燃烧颗粒表面分形维数的下限分别升高了0.1和0.2,表明其燃烧颗粒表面的粗糙程度和不规则程度提高;与柴油燃烧颗粒相比,D10、D20燃烧颗粒的活化能分别降低了3.9和7.9 kJ/mol,表明燃烧颗粒的氧化活性随着DMC添加量的增加而增强,验证了燃烧颗粒微观尺寸结构和分形特征的研究结果. 研究显示,柴油中添加DMC能够提高燃烧颗粒的氧化活性,燃烧颗粒的氧化活性越强,其在后处理过程中就越易被氧化,有助于降低柴油机的颗粒物排放.