Impact of increased collection rates and the use of commingled collection systems on the quality of recovered paper. Part 1: increased collection rates

The recovery and utilization of recovered paper have increased over past decades all over the world due to economic, environmental, and social issues. However, it is well known that an extended recovered paper collection is detrimental to its quality, either by the exploitation of lower quality sources such as households, or the spreading of commingled systems instead of selective collection systems. The influence of these two factors was assessed by analyzing the quality of different recovered paper grades used as raw material in a mill located in Madrid (Spain) producing newsprint and light weight coated paper from recovered paper. Part 1 of the paper deals with the impact of increased collection rates on the quality of recovered paper and Part 2 with the use of commingled collection systems. Results of Part 1 show that increased collection rates have a large impact on the quality of the recovered paper. The quality, measured as total unusable material and moisture contents, had deteriorated very rapidly in only 4 years (2005–2008) as a consequence of increased collection rates. Collection rates increased in Spain from 58.5% to 68.6% during this period, resulting in more than 50% increase of total unusable material and 25% of moisture content. The downgrading of the quality of recovered paper is one of the major threats for extending the current limits of paper recycling. Therefore, future challenge is to increase its availability but maintaining its quality.     

Evaluation of groundwater contamination in a coastal area of south-eastern Sicily

This investigation was under taken to evaluate the groundwater resources contamination due to intensive agricultural practices (particularly greenhouses). The study-area is located in the coastal area of the Ragusa province (South-East Sicily), where numerous existing greenhouses may cause the contamination of groundwater systems (unconfined and confined aquifers) beneath the cropped land. The pollution risk is mainly related with the seepage process of macro-elements nitrogen (N), phosphorus (P), potassium (K), held in the irrigation water and the massive use of fertilizers and pesticides, that may pass through the unsaturated zone of the soil profile. Moreover, the area is characterized by the presence of several wells (about 15 wells/km2) for agricultural use that cause the aquifer overexploitation and the consequent risk of seawater intrusion. The agriculture practices adopted in the study area (irrigation volumes, fertilizer concentrations, use of pesticides…) were monitored since February 2009; moreover, the pollution risk of the aquifers was evaluated through the analysis of groundwater water samples collected (monthly) in the monitoring wells; in particular, nitrogen compounds, soluble phosphorous (PO?2?), potassium, as well as the main pesticides commonly used in the study area, were measured.The results show that electrical conductivity and chloride concentration values can cause reduction of production and leaf damage problems, respectively, for most of the monitored farm systems. The high nitrogen compounds concentrations observed in the monitored wells can cause health and environmental problems. Moreover high pesticide contamination of groundwater was found in two of the five monitored wells.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in River Po sediments

The River Po is the main Italian river draining one of the most populated and industrialised regions in Italy. As part of a monitoring project to assess environmental quality in the River Po, we measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in bottom sediments collected along the whole course of the river, from the spring to the delta, downstream from the confluence of its main tributaries. The aim was to investigate the level of contamination in the main Italian river and the contribution of contaminant loads from the subbasins. Composite sediment samples were collected in summer and winter surveys in low-flow water conditions and analysed by HRGC-HRMS for PCDD and PCDF homologue groups and for the 2,3,7,8-substituted congeners. The spatial trend observed in the Po River for PCDD and PCDF concentrations varied depending on the load of contaminants received from the tributaries and the processes of sedimentation. The sum of PCDD and PCDF concentrations, and the toxic equivalent content, ranged from 121 to 814 and from 1.3 to 13 ng/kg dry weight sediment, respectively. These levels of contamination seem lower than in the sediments of rivers draining highly industrialised areas. The PCDD and PCDF homologue profiles in all the samples were very similar, suggesting a common source of this contamination in the River Po. Principal component analysis suggested that widespread sources, such as urban runoff and domestic wastewaters, are probably the main cause of these levels of PCDDs and PCDFs.     

A general methodology for structuring models to predict the long-term migration of radionuclides from catchments

In the present paper a generic model for predicting the long-term migration of radionuclides and heavy metals from catchments is described. The model subdivides the catchment into a number of homogeneous, infinitesimal sub-catchments and integrates the radionuclide contributions from such sub-catchments to calculate the total flux of contaminant. It relates the radionuclide behaviour to the statistical distribution of the pollutant partition coefficient on the "ensemble" of sub-catchments. The methodology was validated for 90Sr and 137Cs by using data for water contamination in some European rivers. Values of migration parameters for Pu, Tc, I and Cd isotopes were obtained.     

Review and assessment of models used to predict the fate of radionuclides in lakes

A variety of models for predicting the behaviour of radionuclides in fresh water ecosystems have been developed and tested during recent decades within the framework of many international research projects. These models have been implemented in Computerised Decision Support Systems (CDSS) for assisting the appropriate management of fresh water bodies contaminated by radionuclides. The assessment of the state-of-the-art and the consolidation of these CDSSs has been envisaged, by the scientific community, as a primary necessity for the rationalisation of the sector. The classification of the approaches of the various models, the determination of their essential features, the identification of similarities and differences among them and the definition of their application domains are all essential for the harmonisation of the existing CDSSs and for the possible development and improvement of reference models that can be widely applied in different environmental conditions. The present paper summarises the results of the assessment and evaluation of models for predicting the behaviour of radionuclides in lacustrine ecosystems. Such models were developed and tested within major projects financed by the European Commission during its 4th Framework Programme (1994-1998). The work done during the recent decades by many modellers at an international level has produced some consolidated results that are widely accepted by most experts. Nevertheless, some new results have arisen from recent studies and certain model improvements are still necessary.     

Using non-equilibrium biosorption column modelling for improved process efficiency

An unsteady-state biosorption column model in one space variable is considered in this paper. The theoretical study is motivated by the need for predicting the dependent variables of biosorption columns for removal of heavy metals from wastewater, which is potentially an important technology in cleaner production. Pollutant concentrations in the bulk phase, in the liquid filling the pores and in the solid biomass along the axial coordinate of the column were evaluated for a wide range of physical and chemical parameters of the global process. In particular, the assumption of instantaneous chemical reactions is replaced by a more realistic expression taking into account chemical kinetics and fluid advection time scales separately. The resulting system of partial differential equations was solved by means of a reliable numerical algorithm based on the method of lines. The data obtained using the model described in this paper are compared with published experimental data and an estimation of the increased efficiency is made.     

Effect of environmental forcing on the fate of nutrients, dissolved organic matter and heavy metals released by a coastal wastewater pipeline

Discharges of nutrients, urea, dissolved organic matter and heavy metals by a sewage underwater pipeline are analysed in comparison to environmental conditions in a shallow coastal zone. Variable thermo-haline stratifications of the water column and currents in upper (2.62-34.97 cm s^-1) and deeper (0.83-10.91 cm s^-1) layers drive vertical diffusion and lateral transport of wastewaters. Loads of reactive phosphorus (0.13 tons d^-1) and ammonium (1.62 tons d^-1) by the pipeline are not negligible compared to the major river loads in the gulf. High concentrations of urea (≤11.51 μmol N dm^-3) were found in the area of wastewater release. Ammonium uptake (6.14-534 nmol N dm^-3 h^-1) strongly exceeded nitrate uptake (0.19-138 nmol N dm^-3 h^-1), indicating that discharges of ammonium by the pipeline are actively assimilated by plankton community even at low levels of light. Distribution of Zn (≤27.7 ppb), Cu (≤25.6 ppb), Cd (≤0.80 ppb) and Pb (≤13.5 ppb) in the water column and the measurement of their complex-forming capacity in seawater did not indicate a persistent perturbation of the pelagic environment due to heavy metals.     

Influence of large-spectrum environmental contamination on the micro-meiobenthic assemblages in harbour sediments of the ligurian sea (W Mediterranean)

The concentration of a large spectrum of environmental contaminants (PCBs, PAHs, pesticides and metals) was assessed in surface sediments of two Ligurian harbours (Sanremo and Alassio, NW Mediterranean Sea, Italy) and their relative impact on micro-meiobenthic assemblages was analysed. Concentration, distribution and relative importance of the different contaminants varied considerably between harbours in relation to the different anthropic activities and contamination sources. Results from Principal Component Analysis indicated that high levels of contaminants were typically correlated with low micro-meiobenthic abundance in the sediment. Heavy metals and the organic enrichment were the main factors affecting the distribution and abundance of the bacterial and meiofaunal assemblages in Alassio harbour, whereas hydrocarbons and pesticides played a major role in Sanremo sediments. Neither the bacteria density nor the meiofauna abundance were dependent on sediment grain size, suggesting that micro-meiobenthic parameters may be under the influence of other variables. Our results suggest that high concentrations of contaminants independently from their source or typology are responsible for the impact observed on micro-meiobenthic assemblages in these harbours.