Cardiovascular effects of arsenic: clinical and epidemiological findings

Several population studies relate exposure to high levels of arsenic with an increased incidence of ischemic heart disease and cardiovascular mortality. An association has been shown between exposure to high levels of arsenic and cardiovascular risk factors such as hypertension and diabetes mellitus, and vascular damage such as subclinical carotid atherosclerosis. The mechanisms underlying these phenomena are currently being studied and appear to indicate an alteration of vascular function. However, the effects of low levels of exposure to arsenic and their potential detrimental cardiovascular effect are less explored. The article provides an overview of the pathophysiologic mechanisms linking low-level arsenic exposure to the occurrence of cardiovascular disease and its complications, and some potential preventive strategies to implement.     

Diminution of migration of phthalic acid esters in tequila beverage by the year of production

Abstract

The presence of diethyl-phthalate (DEP), dibutyl-phthalate (DBP), butylbenzyl-phthalate (BBP), diethylhexyl-phthalate (DEHP) and diisononyl-phthalate (DINP) was determined in 295 tequila samples. They were grouped by age of maturation (white, aged, extra aged or ultra aged) and year of production (between 2013 and 2018). Gas Chromatography coupled with Mass Spectrometry was used for identification and quantification. The results showed that 65 samples (22% of the total) were phthalate free. DEP (0.13-0.27?mg/kg), BBP (0.05–2.91?mg/kg) and DINP (1.64–3.43?mg/kg) were detected in 11 (3.73%), 37 (12.54%) and 5 (1.69%) samples, respectively. But, these concentrations did not exceed the maximum permitted limits (MPL) of phthalates for alcoholic beverages. DBP (0.01–2.20?mg/kg) and DEHP (0.03–4.64?mg/kg) were detected in 96 (32.54%) and 224 (75.93%) samples, from them only 10 (3.39%) and 15 (5.08%) samples, respectively, exceeded the MPL for alcoholic beverages and they were few tequilas produced in the year 2014 or before. DEHP was the most frequent phthalate found in tequila and observed DEHP concentrations were 2-times higher in ultra aged tequilas compared to those in white tequilas. We concluded that all tequilas produced in 2015 and after, satisfied the international standards for these compounds.     

Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10³ to 6.8 × 10⁸ MPN s^?1. TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.     

Photoactivation and photoregeneration of TiO2/PAC mixture applied in suspension in water treatments: approach to a real application

Environmental Science and Pollution Research - The process TiO2/PAC/UV-vis has been under study and compared with the isolated treatments of adsorption and photocatalysis determining possible...     

SMFC as a tool for the removal of hydrocarbons and metals in the marine environment: a concise research update

Environmental Science and Pollution Research - Marine pollution is becoming more and more serious, especially in coastal areas. Because of the sequestration and consequent accumulation of...     

Assessment of the Streptomyces-plant system to mitigate the impact of Cr(VI) and lindane in experimental soils

Environmental Science and Pollution Research - Phytoremediation techniques have been proposed as ecological methods to clean up contaminated sites. This study is aimed to evaluate the effect of the...     

Magnetic photocatalysts from δ-FeOOH and TiO2 and application in reactions for degradation of methylene blue and paracetamol with UV-C and sunlight

Environmental Science and Pollution Research - Water contamination is a common problem, especially considering dyes and drugs disposal. A possible and effective treatment method to remove these...     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Qualitative and Quantitative Assessment of Hepatitis A Virus in Wastewaters in Tunisia

Hepatitis A causes substantial morbidity in both industrialized and non-industrialized countries and represents an important health problem in several southern Mediterranean countries. The objectives of the study were as follows: (a) to assess the occurrence of hepatitis A virus (HAV) in Tunisia through the monitoring of urban wastewaters collected at wastewater treatment plants (WTPs); (b) to characterize environmental strains; and (c) to estimate the viral load in raw and treated sewages, in order to evaluate the potential impact on superficial waters receiving discharges. A total of 150 raw and treated wastewaters were collected from three WTPs and analyzed by both qualitative (RT-PCR/nested) and quantitative (qRT-PCR) methods. Of these, 100 (66 %) were found to be positive for HAV by the qualitative assay: 68.3 % in influents and 64.7 % in effluents. The vast majority of HAV sequences belonged to sub-genotype IA, with 11 different strains detected found to be identical to clinical strains isolated from Tunisian patients with acute hepatitis. Five unique variants were also detected, not previously reported in clinical cases. Only two IB strains were found, confirming the rarity of this sub-genotype in this country. The results of the present study indicate a wide circulation of the pathogen in the population, most probably in the form of asymptomatic infections, a finding consistent with the classification of the country as having intermediate/high endemicity. Quantitative data showed high viral loads in influents (3.5E+05 genome copies/liter, mean value) as well as effluents (2.5E+05 genome copies/liter, mean value), suggesting that contaminated water could be a critical element in transmission.     

Determination of selenium by GFAAS in slurries of fish feces to estimate the bioavailability of this micronutrient in feed used in pisciculture

This paper presents a simple, fast and sensitive method to determine selenium in samples of feces and of fish feed by graphite furnace atomic absorption spectrometry (GFAAS) through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The limits of detection (LOD) and quantification (LOQ) calculated for 20 readings of the blank of the standard slurries (0.50% m/v of feces or feed devoid of selenium) were 0.31 microg l(-1) and 1.03 microg l(-1), respectively, for the standard feces slurries and 0.35 microg l(-1) and 1.16 microg l(-1), respectively, for the standard feed slurries. The proposed method was applied in studies of bioavailability of selenium in different fish feeds and the results proved consistent with that obtained from samples mineralized by acid digestion using the microwave oven.