The development of probabilistic models to estimate accident risk (due to runway overrun and landing undershoot) applicable to the design and construction of runway safety areas

The risks of landing overrun (LDOR – LanDing OverRun), Take-off Overrun (TOOR – Take-Off OverRun) and landing undershoot (LDUS – LanDing UnderShoot) are dependent on multiple factors related to operating conditions. These include wind, runway surface conditions, landing or take-off distances required, the presence of obstacles, runway distance available, the existence and dimensions of runway safety areas.In this paper we propose risk models for runway overrun and landing undershoot, using a probabilistic approach. These models are supported by historical data on accidents in the area around the runway and will enable us to determine if the risk level is acceptable or whether action must be taken to mitigate such risks at a given airport. Furthermore, these models permit comparison of the results of different risk mitigation actions in terms of operational risk and safety.The principal advantage of this method is the high quality results obtained for a limited investment in terms of time, computing power and data. As such the method is extremely practical and easy to apply in aerodrome planning, development and operation.     

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.     

Biofiltration of fugitive methane emissions from landfills using scum from municipal wastewater treatment plants as alternative substrate

Journal of Material Cycles and Waste Management - Biofilters have been recognized as a key technology in the mitigation of greenhouse gases (GHG) emitted by landfills. This study aimed to evaluate...     

Regional-scale meteorological characteristics of the Vento Norte phenomenon observed in Southern Brazil

Environmental Fluid Mechanics - The sudden increase in air temperature associated with strong gusty winds of northerly direction is a phenomenon occasionally observed during the cold season in the...     

Conservation state of two paintings in the Santa Margherita cliff cave: role of the environment and of the microbial community

Environmental Science and Pollution Research - The conservation of ancient paintings sited in humid environments is an actual challenge for restorers, because it needs the knowledge of the...     

Acute toxicity of disinfection by-products from chlorination of algal organic matter to the cladocerans Ceriodaphnia silvestrii and Daphnia similis: influence of bromide and quenching agent

Environmental Science and Pollution Research - Algal organic matter (AOM) in water reservoirs is a worldwide concern for drinking water treatment; once it is one of the main precursors for...     

Long-range transport and re-circulation of pollutants in the western Mediterranean during the project Regional Cycles of Air Pollution in the West-Central Mediterranean Area

During the warm season (March–September), high ozone concentrations have been reported at the coastal and mountain monitoring stations of the eastern Iberia coast (Millán et al., J. Geophys. Res. 102 (D7) 8811, J. Appl. Meteorol. 4 (2000) 487). The vegetation protection threshold of current Directive 92/72/EEC and the World Health Organisation guideline for the protection of crops and semi-natural vegetation are systematically exceeded during the whole period. The main objective of the present study is to search for the origin of these chronic pollution levels: to search for the reason(s) for such high O₃ concentrations during such a long period. A mesoscale model is used to reproduce the diurnal cycle of winds and stability/layering over the Western Mediterranean Basin (WMB), at a sufficient space/temporal resolution, under a typical recursive synoptic condition during the warm season: data from the flight tracks of the European Project—Regional Cycles of Air Pollution in the West-Central Mediterranean Area—are used to substantiate the model results. Times of residence and the final distribution of pollutants entering the WMB are estimated using single-particle Lagrangian trajectories and a multiple-particle dispersion model. Our results show that the marine boundary layer and the lower troposphere in the region between the Balearic Islands and eastern Iberia are subject to a flow regime that tends to accumulate pollutants within large circulations, covering the entire western basin. We have also shown a diurnal pulsation of the Tramontana/Mistral wind regime, which can transport new pollutants into the area (background concentrations of 50–65 ppb of O₃ of continental European origin) that are added to local emissions and re-circulated within the coastal breezes at eastern Iberia for periods of more than five days. Local emissions and wind configuration contribute to increase the O₃ concentrations up to 100 ppb and even more.     

Eco-Compatible Use of Olive Husk as Filler in Thermoplastic Composites

A study on the possibility of recycling waste materials, such as olive husk, the solid phase derived from an olive oil mill, in blend with thermoplastic polymers to produce new materials for manufacturer of, for example, containers and formworks, has been carried out. The present paper describes the methodology used for the preparation and the characterization of composite samples prepared by mixing various percentages of olive husk and polypropylene. A screening on the chemical-physical characteristics of the olive husk is reported, as well as a set of tests applied to evaluate the mechanical properties of the manufactured products obtained.     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).