Characterization and sources assignation of PM2.5 organic aerosol in a rural area of Spain

The results from a year-long study of the organic composition of PM2.5 aerosol collected in a rural area influenced by a highway of Spain are reported. The lack of prior information related to the organic composition of PM2.5 aerosol in Spain, concretely in rural areas, led definition of the goals of this study. As a result, this work has been able to characterize the main organic components of atmospheric aerosols, including several compounds of SOA, and has conducted a multivariate analysis in order to assign sources of particulate matter. A total of 89 samples were taken between April 2004 and April 2005 using a high-volume sampler. Features and abundance of n-alkanes, polycyclic aromatic hydrocarbons (PAHs), alcohols and acids were separately determined using gas chromatography/mass spectrometry and high performance liquid chromatography analysis. The Σn-alkane and ΣPAHs ranged from 3 to 81 ng m^?3 and 0.1 to 6 ng m^?3 respectively, with higher concentrations during colder months. Ambient concentrations of Σalcohols and Σacids ranged from 21 to 184 ng m^?3 and 39 to 733 ng m^?3, respectively. Also, several components of secondary organic aerosol have been quantified, confirming the biogenic contribution to ambient aerosol. In addition, factor analysis was used to reveal origin of organic compounds associated to particulate matter. Eight factors were extracted accounting more than 83% of the variability in the original data. These factors were assigned to a typical high pollution episode by anthropogenic particles, crustal material, plant waxes, fossil fuel combustion, temperature, microbiological emissions, SOA and dispersion of pollutants by wind action. Finally, a cluster analysis was used to compare the organic composition between the four seasons.     

Mercury uptake and allocation in Juncus maritimus: implications for phytoremediation and restoration of a mercury contaminated salt marsh

Juncus maritimus is the most abundant macrophyte in Laranjo bay, a Portuguese salt marsh heavily polluted by mercury (Hg). With the aim to elucidate the role of this species in the salt marsh Hg cycling and restoration, plants were harvested between March 2006 and January 2008 from four locations differing in Hg contamination. Metal uptake and distribution between plant organs were evaluated, biomass and Hg pools were also determined. Results showed that J. maritimus may influence the sediment pH and Eh, thus increasing the Hg available for uptake. Most (95-98%) of the absorbed Hg was retained belowground, phytostabilizing the metal and reducing the amount of Hg in the sediments. These results suggest that in salt marshes dominated by J. maritimus the approach could be phytostabilization, where these plants can be used to immobilize metals and store them belowground, reducing the pool of bioavailable Hg within contaminated marshes and acting as a sink rather than a source of contamination to the surrounding areas.     

Speciation of Cr and its leachability in coal by-products from spanish coal combustion plants

This study evaluates the behaviour of total Cr and Cr (VI) during coal combustion in two Spanish power stations. The content and distribution of Cr in the feed coal and combustion wastes was determined and the Cr contents were normalized using enrichment factor indexes. The speciation of Cr in the fly ash fractions from the different hoppers of the electrostatic precipitators was established and the possibility that the Cr (VI) might lixiviate when ashes are disposed of at landfill sites was assessed. Differences in the distribution and behavior of Cr in the two power stations were observed. According to European directive 1999/31/CEE, soluble Cr(VI) in the fly ashes studied would be unlikely to pose an environmental or health risk when the ash is disposed of.     

Benthic communities of streams related to different land uses in a hydrographic basin in southern Brazil

Different land uses affect the characteristics of a hydrographic basin, reflected in the river water quality, and consequently affecting the aquatic biota. The benthic community closely reflects the alterations caused by different human activities. In this study, the effects of different land uses were evaluated by analysis of the benthic community structure in streams with urban, agricultural and pasturage influences, as well as areas in better-conserved regions. The abiotic parameters showed distinct seasonal variability, which did not occur with the benthic organisms. A degradation gradient was observed among the study sites, in the headwaters-agriculture-pasture-urban direction. By the CCA its possible to observe that the density of organisms tended to increase along this gradient, whereas richness, diversity, evenness, and EPT families decreased. The most intense effects of land use on the benthic community composition, richness, and diversity were observed in urban areas (F (1,4) = 16.0, p = 0.01; F (1,4) = 8.97, p = 0.04; respectively). In conclusion a trend in the benthic community is observed in to predict alterations caused for the different land uses, mainly, when the source point pollution, as the case of urban area.     

Development of the concept of spatial–temporal mask for testing effects of discharge from well-drilling activities on biological communities

This paper describes the use of Bayesian spatial models to develop the concept of a spatial–temporal mask for the purpose of identifying regions in which before and after drilling effects are most clearly defined and from which the consequences of exposure of macrofauna and meiofauna to the release of drilling discharges can be evaluated over time. To determine the effects of drilling fluids and drill-cuttings on the marine benthic community, it is essential to know not only where discharged materials ended up within the possible impact area, but also the chemical concentrations to which biota were exposed during and after drilling. Barium and light hydrocarbons were used as chemical tracers for water-based and non-aqueous-based fluids in a shallow water site in the Campos Basin, off the coast of Brazil. Since the site showed evidence of exposure to waste material from earlier drilling, the analysis needed to take into account the background concentrations of these compounds. Using the Bayesian models, concentrations at unsampled sites were predicted and regions altered and previously contaminated were identified.     

TPH-contaminated Mexican Refinery Soil: Health Risk Assessment and the First Year of Changes

The soil of a coastal Mexican refinery is quite contaminated, especially by hydrocarbons, with detected concentrations up to 130000 mg kg(-1) as TPHs (total petroleum hydrocarbons). The main sources of contamination are pipelines, valves, and old storage tanks, besides the land disposal of untreated hydrocarbon sediments derived from the cleaning of storage tanks. A health risk assessment (HRA) was carried out in order to measure the risk hazard indexes and clean-up standards for the refinery soil. HRA suggested the following actions to be taken: benzene concentrations must be reduced in eight of the 16 studied refinery zones to 0.0074-0.0078 mg kg(-1). Also, vanadium concentration must be reduced in two zones up to a concentration of 100 mg kg(-1). In only one of all of the studied zones, benzo(a)pyrene concentration must be reduced to 0.1 mg kg(-1). After 1 yr, TPHs showed a diminution of about 52%. Even though TPHs concentrations were variable, during 1999 the average concentrations were as much as 15.5 times the goal concentration. For year 2000, TPHs concentrations were only 7.4-fold the proposed value. For the 1999-2000 period, PAHs (polycyclic aromatic hydrocarbons) concentrations decreased by 82%. Some PAHs with 2, 3, 4, and 5 aromatic rings were removed up to 100% values.     

Large and mesoscale meteo-oceanographic patterns in local responses of biogeochemical concentrations

Investigations surrounding the variability of productivity in upwelling regions are necessary for a better understanding the physical-biological coupling in these regions by monitoring systems of environmental impacts according to the needs of the regional coastal management. Using a spatial and temporal database from National Centers for Environmental Prediction (NCEP) and National Center for Atmospheric (NCAR) Research reanalysis, Quick Scatterometer vector wind, and surface stations from the Southeast coast of Brazil, we investigate the meteorological influences due to the large-scale systems in the variability of the nutrient and larvae concentration, and chlorophyll a, describing statistically relationships between them in upwelling regions. In addition, we used multivariate analysis, such as PCA and clustering to verify spatial and temporal variances and describe more clear the structure and composition of the ecosystem. Correlation matrix analyses were applied for different water masses present in the study area to identify the relations between physical and biogeochemical parameters in a region, where frequently upwelling occur. Statistical approaches and seasonal variability show that the period of November to March is more sensitive to nutrients (1.20?mg/m(3) for chlorophyll a, 2.20?μmol/l for total nitrogen and 5.5?ml/l for DO) and larvae concentrations (120 org/m(3) for most of the larvae, except for cirripedia that presented values around 370 org/m(3)) relating to the influence of large and mesoescale meteorological patterns. The spatial and temporal variables analyzed with multivariate approach show meaningful seasonality variance of the physical and biological samples, characterizing the principal components responsible for this variance in spring and summer (upwelling period), emphasizing the monitoring of species as crustaceans and mussels that are present in the local economy. Then, the spring and summer season are characterized by high productivity due to the occurrence of upwelling in this period.     

Monitoring of a Coastal Mediterranean Area: Culturable Bacteria, Phytoplankton, Environmental Factors and their Relationships in the Southern Adriatic Sea

Culturable heterotrophic bacterial and phytoplanktonic densities were investigated at four sites in the Southern Adriatic Sea (Brindisi, S. Cataldo, Otranto and S. M. di Leuca) over an annual cycle. The main phytoplankton groups, the bacterial biodiversity, as well as the faecal contamination indicators were determined. Culturable bacterial numbers averaged 4.8 ± 0.2 log CFU ml⁻¹ whereas phytoplankton numbers averaged 2.1 ± 0.4 log cells ml⁻¹. Relationships between culturable bacteria, phytoplankton and the environmental factors were established. Bacterial and phytoplankton densities usually depended significantly on temperature, dissolved oxygen, phosphate and nitrite only in the S. Cataldo transect. In all the examined transects phytoplankton showed a bloom during the January–February period followed by a bacterial peak during the February–March period. Thus we can suppose that the phytoplankton winter bloom is responsible for the availabily of organic matter for bacterial populations in the following months in this oligotrophic ecosystem.     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).