Genotoxicity of two novel pesticides for the earthworm, Eisenia fetida

In this paper, several studies were conducted to evaluate the genotoxicity of two pesticides, Imidacloprid and RH-5849, for earthworm (Eisenia fetida). Earthworms were exposed in different exposure systems to evaluate their acute toxicity and the genotoxicity of the two pesticides was evaluated by using the method of sperm deformity assessment, micronucleus test of root tip cells in Vicia faba, a mouse bone-marrow micronucleus test, and comet assay. LC(50) (interpolated concentration at which 50% mortality of test population occurs) for earthworms varied in different exposure systems. The results indicated that Imidacloprid was consistently more toxic than RH-5849 in all exposure systems. In this study, sperm deformity test was used to detect the potential adverse influences of pesticides on the reproduction of earthworms. The results demonstrated that significant induction of sperm deformity (p<0.01) and a dose-effect relationship displayed at Imidacloprid concentrations higher than 0.5 mg/kg dry soil. However, the sperm deformity frequency of groups exposed to RH-5849 did not show significant difference (p>0.05) from the control until the dose reached 100 mg/kg dry soil. The results of the V. faba micronucleus tests showed that micronuclei frequency of the exposed group did not show significant difference (p>0.05) from the control until the concentration of Imidacloprid and RH-5849 reached 100 mg/ml. The results of the mouse bone-marrow micronuclei test also indicate that two pesticides did not show significant effects (p>0.05) on the micronuclei frequency in mice bone-marrow cells until the dose reached 100 mg/kg for Imidacloprid and 300 mg/kg for RH-5849 (2/3 LD(50)). Although no genotoxicity was detected by using the micronucleus tests, the results of the comet assay showed that the two pesticides induce significant DNA damage (p<0.01) in earthworms and dose-effect relationships were displayed. The 'earthworm comet assay' is a rapid and sensitive way to screen chemicals or terrestrial environments for their DNA-damaging properties.     

微量元素对柠檬酸废水发酵回用的影响

本文研究了微量元素Cu2 、Fe2 、Zn2 、Mn2 、Mg2 和PO3-4 对柠檬酸中和废水发酵的影响。在经过“碱沉淀—离子交换法 (AIE法 )”处理后的废水培养基中分别加入 1× 1 0 -8g/mlMn2 、1× 1 0 -7g/mlZn2 、1× 1 0 -6 g/mlMg2 、1× 1 0 -5g/mlCu2 和 1 .5× 1 0 -2 g/mlPO3-4使产酸依次提高 2 .8%、9.0 %、1 0 .5 %、8.3%、7.2 %和 3.4 %。Fe2 的加入降低了柠檬酸产量。     

The improved activity of Co3O4 nanorods using silver in the catalytic oxidation of toluene

Environmental Science and Pollution Research - Co3O4 nanorods with diameters of ~0.15 μm and lengths of ~1 μm were prepared using a hydrothermal method via the assembly of microcrystals...     

Groundwater geochemical signatures and implication for sustainable development in a typical endorheic watershed on Tibetan plateau

Environmental Science and Pollution Research - Groundwater resource is significantly important for sustainable development of the world, especially for arid endorheic watersheds. A total of 28...     

毛毯印染废水处理技术研究

本文采用投菌水解(酸化)--接触氯化法处理毛毯印染废水.试验表明该工艺流程简单,处理效果好,出水水质稳定.当进水CODc在480～750mg/L范围变化时,出水CODDc稳定在100mg/L以下.其中,水解池对色度有较好的去除效果,同时可提高后续接触氧化池的处理效率;而CODc的去除则主要在接触氧化池进行.     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

H2O2处理酸性大红GR染料废水的研究

通过对废水pH值、H2O2用量、催化剂用量、反应时间、反应温度等工艺条件的考察,确定了H2O2催化氧化处理酸性大红染料废水的最佳工艺条件pH 4、H2O2用量6 mL/L、催化剂用量3 g/L、反应时间100 min、反应温度70℃.在该条件下,COD和色度的去除率分别为76.7%和99.4%;通过反应前后的紫外-可见光光谱分析表明,H2O2催化氧化处理酸性大红GR染料废水有比较好的效果,为该工艺处理酸性大红GR染料废水提供了科学依据.     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

氯自由基介导的BDD电极选择性氧化脱氮

为实现氨氮的高效选择性转化,设计了一个氯自由基介导的电化学体系。该电化学体系以稳定性好、氧化能力强的掺硼金刚石(BDD)电极为阳极,以Pd-Cu修饰的泡沫镍材料(Pd-Cu/NF)为阴极,以氯化钠为电解质,对BDD电极选择性电催化氧化性能与机理进行了研究。结果表明：在4.0 V电压下,体系中的Cl⁻原位可转化成氯自由基(Cl·),Cl·可选择性地将氨氮转化为N₂和少量$ {\rm{NO}}_3^ - $,副产物$ {\rm{NO}}_3^ - $在Pd-Cu/NF阴极被高效还原为N₂;分别探究了阴极材料、电场强度、电极间距、溶液pH和电解质种类对氨氮转化性能的影响。通过电子顺磁共振和自由基捕获实验,证实了Cl·在氨氮转化过程中发挥了重要作用。在最优条件下,可实现40 min内100%的氨氮转化率和25 mg·L⁻¹的N₂生成量,以上研究结果可为解决水体中氨氮的污染问题提供参考。